2019 Corvette C7 ZR1 Door panel and Mirror Removal
ฝัง
- เผยแพร่เมื่อ 15 ต.ค. 2024
- This video covers removal of the door panel, window sweeps inner and outer, speaker and mirror. The passenger side exit button removes the same way and there is no trap door over the second 10mm bolt.
Tool needed
Swivel 10mm ratchet wrench
10mm Socket with extension
T15 and T25 Torx
Plastic Panel Poppers
Hook tool
Olfa Knife or a blade to score the sticky body glue
Door panel has 9 Plastic clips fasteners and 6 Metal clips in the top seal
Check out our website:
marveloustintso...
Tint your car with our Visual Tinter App:
marveloustintso...
Follow our Social Media:
/ marveloustin...
www.yelp.com/b...
/
Getting ready to wrap my C7 this weekend, your video helped immensely. Thank you!
I’m trying to wrap my car too but this is too much damn work just to remove a mirror lol
How was the wrap install?
@@thisnewcreatedaccount5286 my install went great! Took me and a buddy about 50 hours start to finish, removing both bumpers and mirrors/door panels. Did KPMF matte russet red and get compliments every single day.
Great youtube University video. Thanks brother.
Thanks for uploading this. I'm going to change mine out from grey to black. Did a searched and yours is the best, most detailed out there!
Great Video, I am looking to install Smaller Base and a Mid range in that same Slot also sound deadening materials !
Great Job!
Great Video!
Muchas gracias me fue de gran utilidad. Dios te continúe Bendiciendo 🙌
Thanks
For reinstalling the speaker do you need to remove and replace the seal/glue that’s around it?
I did not. Just try to keep it together as best as you can.
@@MTSSacramento awesome thanks!
I am about to do this. Why do you need to remove the window seals? thanks
Cleaner, faster install.
My drivers side speaker or door panel rattles with base sound. Any tips on padding or correction?
There is sound proofing goop on the factory speaker. It could be the speaker itself or something in the door panel.
Some tabs are so strong I always have a flathead wrapped in tape to pull some things
Dam so I replaced the window but now it doesn’t want to roll up. It rolled all the way down at first and now it’s stuck at the bottom
It sounds like it's not in the correct position.