Start with scooter off, press and hold brake then power on with button on the right. Immediately press the throttle lever to full the following number of times then release all. (Number of presses) Action (2) Cruise control (3) Power from a stop (4) No speed limiter (5) Speed Limiter 25km/h (6) Speed Limiter 20km/h (7) (Not Used) (8) Speed Limiter 12.5km/h
oaiaferoce omg. thank you thank you for posting this comment. I had clicked my uscooter 3 times and thought the motor was dead. nows i know. thank you.
Start with scooter off, press and hold brake then power on with button on the right. Immediately press the throttle lever to full the following number of times then release all.
(Number of presses) Action
(2) Cruise control
(3) Power from a stop
(4) No speed limiter
(5) Speed Limiter 25km/h
(6) Speed Limiter 20km/h
(7) (Not Used)
(8) Speed Limiter 12.5km/h
Thank you, this is very useful
What version of E-TWOW is this? Doesn't seem to work on my S2 Booster.
Thank you very much...!!!!!!!!!!!
Hello, in Belgium it has to be under 18km/h. Do you know which setting this is? Thx
cruise control - 2
no power if still mode - 3
no limitation - 4
limitation 25 - 5
limitation 20 - 6
limitation 12.5 - 8
oaiaferoce omg. thank you thank you for posting this comment. I had clicked my uscooter 3 times and thought the motor was dead. nows i know. thank you.
What do you mean by no power if still?
if activated, no power if still assures the motor won't trigger unless you give the scooter a kick first, to have it on the move
from Switzerland:-))
actually u need not off and on to set it to cruise control. u may do it even when it's still on. juz sharing peeps
thank you very much :)
What is the setting for america?
подсветку дисплея как включить?