Audi A6 2010 EZS All Keys Lost on bench using Autel IM608
ฝัง
- เผยแพร่เมื่อ 18 พ.ค. 2023
- If this content helped you, you can buy me a coffee or make a donation
You can also become a VIP member on Patreon to access exclusive members-only content, technical information, videos, and procedures
VIP members also unlock access to the VIP Discord chat room where users can get support from myself and a knowledgeable community
www.buymeacoffee.com/joedlock...
/ joedlocksmith
JoeDLocksmith - Automotive Locksmith and Technical Support demonstrating Automotive Key Programming Procedures
These videos are only intended for educational purpose and should not be used for any illegal activities.
UHS Hardware For Locksmith Keys and Supplies
Here's a $15 off coupon for your first order at UHS Hardware. To accept, use my referral link:
i.refs.cc/p6fUJtZs?smile_ref=...
I believe Xhorse has solderless connections for this as well.
Thanks for the great content
Thank you love the video thanks
❤❤❤ great job sir
Thank you man, will I have to make dealer key before writing it to chip?
Hi, great video. simple and well explained. Will it be required to learn the key via obd?
Hi! Does this Audi equipped with start stop button, and if so, do you need to get synchronization data?
Great job. Is there a way to cancel the immobilizer on the a6 4f? I want to make a remote start on mine, but I'm afraid that if I cancel the immobili, the steering wheel will remain blocked and the car won't start.
Great video ,,, question 🙋♂️ ,, how did you know what frequency to use ?
Thank so much
in Audi A6 C7 do you have to turn off the ignition every time by adding more keys?
Will lost keys still start the car? I have a stolen rocovered car with one working key but someone else has a key so wanted to wipe imobiliser before programming new keys
Fine
Wiw thanks man.
Would that work on Q7 2011 or 12 AKL?
Are you doing this via Bench? Or are you connected via OBD?
Do you have a video link you could share for wiring up for bench read?
I can’t find any videos for this and don’t want to make a mistake in first try. Thank you,
Is it possible to program xhorse chips ? I have heard only OEM keys will do the job
If I join your group do you have a video that can help me wire up the bench on 2007 Audi S8? Customer
Had the Module Cloned to new Chip & key didn’t program as said it would.
I’d like to program the key for them, using either Autel 6082 or Key tool Plus with all adapters.
Can’t find a good diagram for specefic Chip.
Merci Pour l appartage vidéo,
What module is that and location of it thank you
Good😊
Where can I find that module
Hello Joe,
Will this method work for a 2007 Audi A6?
Great video man very impressive knowledge!! Where the module was located on this one?
This is the electronic steering lock. It is below the steering column
Hi Joe, thanks again for this excellent video. Quick question, Audi A3, 2011, all key lost. Does Autel IM608 still able to do through De-energize BCM and energize??
No not on that model
@Autel Joe Thanks Joe.
Do you IM608 can do all key lost on an Audi A3 2011. Last time I struggled with an RB8 dashboard on a Seat Exeo, same as an Audi A4.
Do you know to what years is the Autel im608 pro able to add key for Audi
It depends on the model. Mostly up to 2016
@@JoeDLocksmith yeah I tried yesterday on 2007 q7 to add key it failed couldn’t read 12 digit pass
Were you able to program a remote for the car?
Yes
Is the programming through the scanner or was the remote integrated circuit?
@@300zxlui integrated
And for Audi all keys lost up to what years can im608 pro do?
It depends on the model. Mostly up to 2016
@@JoeDLocksmith hello, good video, you can make an audi A3 in this way if you help me by giving me an instruction
@@alexanderhenrriquez5563 A3 is different. If you need help, become a vip member on my Patreon or buymeacoffee page and I can help you there. www.buymeacoffee.com/auteljoe
www.patreon.com/AutelJoe
I did the same procedure for a 2013 audi q7.. push button. It didn't work.. can you give me a hand?
did you make the car?