This 7 year old video is timeless! I had to replace the fan and upgrade the RAM on my laptop and was very sceptical about doing it. Your video thoroughly helped me navigate each part. Thankful to you man!
What fan did you use? Grandmother got me this when it came out and it was supposed to be knew. Finally took it apart after having it sitting around gathering dust for years only to find that it has no fan in it in the top left where it is supposed to be at. I’m new to this stuff and don’t want to order the wrong one.
Thanks so much for this video! Decided that I would be a super nice guy, and upgrade my sister-in-law's old, slow HP 15-g073nr laptop, from 4gb to 8gb, and started trying to disassemble this monstrosity, before even confirming that I had the memory on-hand. :-D Thankfully I did, and, also thankfully, I found your video. I have worked on numerous laptops in my 35+ years in the biz, and this is one of the worst designed that I have had the displeasure of messing with. Whatever idiot thought that you should have to, practically, pull the whole thing apart, just to replace / upgrade the hard drive and memory (which was even worse), should be kicked in their most tender spots with full, brute force. There is a special, extra-hot place awaiting them in the after-life. LOL! Over 5 years since you posted this video, and you're still helping folks.
@Moh Amed I only worked on it one time over a year ago, so I didn't remember. However, at the 6:50 mark in the video, he shows the board, and it only takes 1 stick of memory.
I've been working on computers since 92ish. I've taken down hundreds of laptops to the bare components. I've built monster gaming machines, load bearing servers, gamers on a budget, workstations, full desktops that pull under 20 watts so that they can run on a cigarette lighter adapter in an airplane for aerial photography. I built modular wireless systems for long range wireless and use that to serve over 2500 sq miles high speed Internet in the boonies as well as every customer unit. I've built carburetors, engines, every component in a car aside from a transmission and differential from the base components. I've designed 400hp engines on a budget, tuned similar engines to get 24mpg with a carb in a classic car. I've spent two hours trying to get my wife's laptop apart so I can swap the wireless card and upgrade the RAM. Thank you for this video. I absolutely *hate* this computer.
You're a life saver my dude. I have never opened a laptop before, but I saw some other laptops and had a vague strategy I would use. I had to change strategy because you can't lift the back off like with the others over seen. I had eventually loosened every clip, but couldn't get the palm rest off. If it weren't for you showing that you had to disconnect the keyboard, I would have never gotten to the hard drive. Thank you for breathing new life into this machine!
Thank goodness I found this video. I was upgrading the old(slow) hard drive to an SSD for a friend. Done loads for other people, but this was the most difficult to actually get to the hard drive. What a dreadful design HP! Basics like the hard drive and RAM chips should be easy to get to. On this thing, it's easier to replace the keyboard. In terms of user friendlyness for the owner to be able to upgrade/repair, this laptop, it's on a par with something Apple would proud of. Got to say that even with a SSD inside, it still doesn't break any speed records. If you have one of these, I'd say replace rather than repair/upgrade.
Just did one for a friend, god damn these laptops are a pain in the arse, my friend was looking at me like “does he really know what he’s doing?” I was like “it’s just this one all the others I’ve done have gone smoothly” not sure she believed me lol
Yes! Yeees! Yeeeeesssss! Great video! This is the first video I found where I can see how to disassembly my HP 15r209nl laptop. HP sells the same case with hundreds of different names, and is difficult to find the exact video you need. After 2 years of research, I found this video, so I could change the hdd: the original one was terribly slow, at the start up is 100% occupied for more than 3 minutes. Now I can boot Windows 10 in less than 20 seconds (typing password included) and Ubuntu in nearly half the time. Thanks to your video I did not forgot any screw and was able to change the hdd with a ssd in a little more than 20 minutes. I spend 1 day to be able to make a dual boot working, but this is another story.
Thank you for this video. All the others did not show the keyboard covering screws. The fan went out on my wife's laptop and I needed to fix it. She passed of covid and our memories are on it.
Taken many laptops apart, I reached the point when the screws were out and the center was not budging. YOUR video showed the keyboard removal and viola. Thanks
@@DD-101 had to buy a new laptop, i think i didnt attach the battery connector correctly and was pissing me off. Go for an acer bro less hassle hahaha hps suck
@@silverjay4455 Yeh had a few and they do suck!! for plenty of reasons too! Got a couple to upgrade the hard drives to ssd and was considering the thermal paste job at the same time... they have to be taken apart anyway!! fingers crossed.. will be considering acer and others when its time for a new one. Cheers
well this was most helpfull, a fire destoryed our home last month and my hp notebook 15 was burnt, well it still worked, i decided to remove the hard drive and ram,but ran into problems trying to open it up, , but now this video has helped me
This helped a lot. Thank you! There were several "tricks"... (1) pull out the optical drive using mild force (2) two smalls screws under the optical drive needed to be removed and (3) the keyboard just clicks off ... without your video I would have given up.
Great! I've historically taken all my laptops apart to upgrade but was really struggling with this one. They make them harder these days! Very helpful vid. All sorted now. Thanks.
yea i have that laptop 1 of the worst hardware designs , u shoudl've seen the battery holders ffs i thought it was broken at 1st , until i saw a utube vid where the guys says it's actually purposly made like that
Thankyou so so much bro...... I have exactly same model and hence was able to repair myself.... Else it would have been tough during this lockdown period
I have this exact laptop. Except mine doesn’t use a fan. Thanks for helping me take it apart. Wish I would have watched this video before guessing the bottom comes off. Just waiting for the ram to comes in the mail as I bought two separate 4gb ones instead of a single 8gb on accident. I’m hoping the motherboard can handle it. I’m unsure about it. Great time to clean all the dust and dirt off. I get great anxiety that once I put it al together it won’t work again. Haha
Toshibas and Dells are a piece of cake. These hp's belong in a dumpster. Acers are easy to work on.... Now Asus- they belong in the dumpster with the hp's.
terrible design: they do not want you to change that horrible and slow hdd they put inside. If you open (HP call center told me), you lose any warranty. Do not open it. I'm not going to buy an HP notebook again. Oh, yes, this kind of laptop, has also a very unconfortable keyboard. (especially arrows, are difficult to find, if you do not look at them)
thanks on the rundown! I was so confused when I unscrewed all the bottom screws and nothing budged. Of course they would make this as anti-serviceable as possible. I basically broke 40% of the tabs on the top plate but idc, it's going to be my beater laptop anyway!
Its hot glued in place or some sort of clear glue on the corners of the chip, you can heat up the glue and pull it off. However since there is nothing to control the processor from moving you would have to glue it back on afterward.
@@pxpin89 Also are you 100% sure for 15 r254nu, bcuz i had 8 by default, currently 4gb, i wanna be concrete sure without opening up the laptop first to check if i should order an 8 gig and replace or one more 4 gig.
You just need to get it where the motherboard you can look under it to slide to ram in. Not difficult at all just be careful. I broke one screw slot off. Somehow somewhere lol
HP Notebook - 15-r110na (ENERGY STAR) - sadly my version has no fan but what is really odd, HP has placed a foam type of material at the end of the HS so it blocks the air vents on the left side. How the hell is that supposed to help. lol. Maybe it is there to act as a kind of filter? Cheers for the upload.
I wanted to know is it possible to upgrade graphic card and ram to make it faster for gaming I play world of warcraft and it crash's alot and lags in some places so ya is it possible to upgrade grade it to be better please let me know and what I would need thank you
@@winstonlight5019 I'd throw it too, but would like to pull out the HDD, so still need to disassemble it. Then will put an 18$ SSD, clean install of Windows, and see how it runs. Too bad upgrading the memory is too much pain for me to handle.
@@winstonlight5019 I bought this computer about 5 years ago for about 300$ (meaning super cheap) to bring with me when I travel, to connect to the TV in the hotel room, to play youtube and movies, and it did fine for that. I rarely use it lately, but when I do, I notice that it got slow, though once you start something playing it's smooth. I'm thinking a fresh windows install will rejuvenate it, and an SSD should make it faster than when it was new. Hope it can serve me one more vacation. But man - that design... Did they do it on purpose? Maybe we could get to the memory module by cutting through the bottom with Dremel? :)
got this pc for free by an pc fix and repair shop that gave up on it xD now i understand why... i wanted to upgrade the ram on it but nvm. yeah i could do it but its easier to just wipe the damn thing, put a sshd in it and then run linux on it. gonna give it to my uncle for christmas, i hope he will be happy
Hello. This model is Model: 15-G011SQ? I tried to upgrade on ssd, to this hdd, but i do not have to dissansamble, that model? I have a question. I have during upgrade on ssd, in location to Dvd/RW?. Have work detection to Bios, on this place on SSD, into place on dvd/rw.. Thanks for your video And wait to answer my question! Traian on Romania🤗
I am planning to see if I can revive a similar machine of mine. It needs the hard drive just chucked and probably the APU repasted. So that will be an adventure and a half lmao
it does not. You can get an adapter but the problem is the chips on the M2 drive will sit upside down working together with the board to generate some real heat. These run hot anyway, but all in all I have had 3 of them and they suit all my needs.
Thanks a lot. You helped me (not to disassemble the laptop but to decide that it's not worth it). Mine already has 8gb ram and an SSD so will work just fine for the next years(It'll be nice to have 16Gigs of ram and to put a better ssd inside). Never buying an HP in the future.
TP connector broke while following the remove keyboard tray portion. Some voice audio warnings would have helped. My instincts told me to just install lightweight Linux distro as this will never run Windows 10 well, even with upgrade to SSD; I should have listened.
Yet another video for a HP 15 that does not apply to MOST HP 15 laptops. How about giving more info on your title relating to the actual model. Like is is a 15-AYXXX, 15-ACXXX, 15-BAXXX, 15-AFXXX or 15-AJXXX? A little more info will go along ways.
J Boyd - Actually this is the only video I could find that has the same crappy design as mine. All the other videos looked like removing stuff was a bit easier. But only a bit
Hp laptops are shit at upgradeability.. just to upgrade the RAM, you gotta take apart every piece of the laptop.. who the fuck designs these.. ive upgraded eny x360, and pavillion and this hp 15 model. and I've learnt that i have to always remove the rubber tabs for hidden screws.
Hp in general are the Apple of PCs. Laptops - hard to open and access anything and all these hidden screws. Desktops - too many proprietary components. Printers - good luck with 3rd party inks.
This 7 year old video is timeless! I had to replace the fan and upgrade the RAM on my laptop and was very sceptical about doing it. Your video thoroughly helped me navigate each part. Thankful to you man!
How much Ram brother?
@@ANSHUKUMAR-sx6gr I added an extra stick of 4 GB for dual channel usage.
What's the max ram that it can be updated to. I wish to upgrade mine to 8 or 16
What fan did you use? Grandmother got me this when it came out and it was supposed to be knew.
Finally took it apart after having it sitting around gathering dust for years only to find that it has no fan in it in the top left where it is supposed to be at.
I’m new to this stuff and don’t want to order the wrong one.
@@gdiaz8827 I think its 16 gigs.
Thanks so much for this video! Decided that I would be a super nice guy, and upgrade my sister-in-law's old, slow HP 15-g073nr laptop, from 4gb to 8gb, and started trying to disassemble this monstrosity, before even confirming that I had the memory on-hand. :-D Thankfully I did, and, also thankfully, I found your video.
I have worked on numerous laptops in my 35+ years in the biz, and this is one of the worst designed that I have had the displeasure of messing with. Whatever idiot thought that you should have to, practically, pull the whole thing apart, just to replace / upgrade the hard drive and memory (which was even worse), should be kicked in their most tender spots with full, brute force. There is a special, extra-hot place awaiting them in the after-life. LOL!
Over 5 years since you posted this video, and you're still helping folks.
i totally agree with this, was gonna upgrade the ram and thought fk it, ill leave it like that lol
Hello sir, is this computer accept tow Ram? I mean is it have tow place for ram or just one?
Thank and I hop you reply
@Moh Amed I only worked on it one time over a year ago, so I didn't remember. However, at the 6:50 mark in the video, he shows the board, and it only takes 1 stick of memory.
I've been working on computers since 92ish. I've taken down hundreds of laptops to the bare components. I've built monster gaming machines, load bearing servers, gamers on a budget, workstations, full desktops that pull under 20 watts so that they can run on a cigarette lighter adapter in an airplane for aerial photography. I built modular wireless systems for long range wireless and use that to serve over 2500 sq miles high speed Internet in the boonies as well as every customer unit.
I've built carburetors, engines, every component in a car aside from a transmission and differential from the base components. I've designed 400hp engines on a budget, tuned similar engines to get 24mpg with a carb in a classic car.
I've spent two hours trying to get my wife's laptop apart so I can swap the wireless card and upgrade the RAM.
Thank you for this video. I absolutely *hate* this computer.
Gotta agree. Never buying a fucking laptop again. Swapping RAM goes from EZ PZ to fucking hell
Its unbelievable how difficult and shitty is to upgrade this notebook's ram.
@@talishkavonzua heh always get the model with the little extra cover door so it can acsess the wifi card and ram easier
@@talishkavonzua its ram is shit.
just get a better pc. then u wont have the problem. i agree it is shitty to upgrade it
@@talishkavonzua do u know how many Ram slots this laptop has?
The Best Disassembly Video i have ever seen ,as an It tech i have watched 100,s No ten minute run up and straight to the point Well done
You're a life saver my dude. I have never opened a laptop before, but I saw some other laptops and had a vague strategy I would use. I had to change strategy because you can't lift the back off like with the others over seen. I had eventually loosened every clip, but couldn't get the palm rest off. If it weren't for you showing that you had to disconnect the keyboard, I would have never gotten to the hard drive. Thank you for breathing new life into this machine!
Thank goodness I found this video. I was upgrading the old(slow) hard drive to an SSD for a friend. Done loads for other people, but this was the most difficult to actually get to the hard drive. What a dreadful design HP! Basics like the hard drive and RAM chips should be easy to get to. On this thing, it's easier to replace the keyboard.
In terms of user friendlyness for the owner to be able to upgrade/repair, this laptop, it's on a par with something Apple would proud of. Got to say that even with a SSD inside, it still doesn't break any speed records. If you have one of these, I'd say replace rather than repair/upgrade.
Just did one for a friend, god damn these laptops are a pain in the arse, my friend was looking at me like “does he really know what he’s doing?” I was like “it’s just this one all the others I’ve done have gone smoothly” not sure she believed me lol
can you please tell the model number of the wifi card
Yes! Yeees! Yeeeeesssss!
Great video!
This is the first video I found where I can see how to disassembly my HP 15r209nl laptop.
HP sells the same case with hundreds of different names, and is difficult to find the exact video you need.
After 2 years of research, I found this video, so I could change the hdd: the original one was terribly slow, at the start up is 100% occupied for more than 3 minutes.
Now I can boot Windows 10 in less than 20 seconds (typing password included) and Ubuntu in nearly half the time.
Thanks to your video I did not forgot any screw and was able to change the hdd with a ssd in a little more than 20 minutes.
I spend 1 day to be able to make a dual boot working, but this is another story.
Good video. Took me forever to find one for this old model. Thanks for putting it together.
Thank you for this video. All the others did not show the keyboard covering screws. The fan went out on my wife's laptop and I needed to fix it. She passed of covid and our memories are on it.
Taken many laptops apart, I reached the point when the screws were out and the center was not budging. YOUR video showed the keyboard removal and viola. Thanks
dont know how to thank you dude, this massively helped me to reach the CPU and change thermal paste after 8 years BIG THANK YOU
This job i need to do next, how did it go ? as expected? Were there any problems that you didn't think of that you came accross? Cheers 🍻
@@DD-101 had to buy a new laptop, i think i didnt attach the battery connector correctly and was pissing me off. Go for an acer bro less hassle hahaha hps suck
@@silverjay4455 Yeh had a few and they do suck!! for plenty of reasons too! Got a couple to upgrade the hard drives to ssd and was considering the thermal paste job at the same time... they have to be taken apart anyway!! fingers crossed.. will be considering acer and others when its time for a new one. Cheers
well this was most helpfull, a fire destoryed our home last month and my hp notebook 15 was burnt, well it still worked, i decided to remove the hard drive and ram,but ran into problems trying to open it up, , but now this video has helped me
You're about to be my life saver. I must replace a CPU fan for that model very soon! Thank you so much for uploading this video!
Thanks a lot! You're the man! First time I opened a laptop thank to you :)
Very helpful! I have just managed to replace the fan, using this and a couple more videos. Thank you!
Thanks for this video! Lost my laptop to water damage and this let me extract the hard disk to retrieve my files!
Thank you so much for this guide! I would have had a really bad time upgrading my mom's old laptop without it!!!
Thx for this video! I needed to change the HDD for and SSD and this really saved me!!
Wish there was sound, even a voiceover would have been awesome.
This helped a lot. Thank you! There were several "tricks"... (1) pull out the optical drive using mild force (2) two smalls screws under the optical drive needed to be removed and (3) the keyboard just clicks off ... without your video I would have given up.
And 8 months later I found the same video to perform the same job on the same laptop again :-D
Thank you for your video my friend I disassembly my laptop Change thermal paste and when I turn it on not working the wlan can you help me?
Great! I've historically taken all my laptops apart to upgrade but was really struggling with this one. They make them harder these days! Very helpful vid. All sorted now. Thanks.
thanks for the video - must be one of the hardest laptops to open!
Wow what a crappy design. On my Lenovo you simply open the back cover and replace whatever you wish :D
yea i have that laptop 1 of the worst hardware designs , u shoudl've seen the battery holders ffs i thought it was broken at 1st , until i saw a utube vid where the guys says it's actually purposly made like that
@@MTareq1 I broke all the cables
@@winstonlight5019 xd
I agree. Lenovo whenever possible.
l have this laptop
and fuck off
Do I need to unscrew the back panel to get the hard drive????
Здравствуйте! Сколько максимум поддерживает оперативной памяти данный ноутбук с 1 каналом
? Спасибо.
Thankyou so so much bro...... I have exactly same model and hence was able to repair myself.... Else it would have been tough during this lockdown period
I have this exact laptop. Except mine doesn’t use a fan. Thanks for helping me take it apart. Wish I would have watched this video before guessing the bottom comes off. Just waiting for the ram to comes in the mail as I bought two separate 4gb ones instead of a single 8gb on accident. I’m hoping the motherboard can handle it. I’m unsure about it. Great time to clean all the dust and dirt off. I get great anxiety that once I put it al together it won’t work again. Haha
Can you upgrade the the processor?
Does this laptop needs thermal paste?
Is it is possible to change motherboard from LA-a994p(N3530) to LA-a992p(i5) motherboard
Plz reply.
Wow, from what i can tell is that you really need to disassemble 80 to 90% just to replace a memory module, is it true ?
Yes, a bit funny construction :)
Toshibas and Dells are a piece of cake. These hp's belong in a dumpster. Acers are easy to work on.... Now Asus- they belong in the dumpster with the hp's.
terrible design: they do not want you to change that horrible and slow hdd they put inside. If you open (HP call center told me), you lose any warranty. Do not open it.
I'm not going to buy an HP notebook again.
Oh, yes, this kind of laptop, has also a very unconfortable keyboard. (especially arrows, are difficult to find, if you do not look at them)
To replace the ram is easy. The problem comes when you need to replace the hdd or fun, you must open the case.
Thanks for the video, this laptop has the most anti DIY and messed up design I ever saw ahah
I hope you can reply me.
Is there a M.2 slot in this laptop
thanks on the rundown! I was so confused when I unscrewed all the bottom screws and nothing budged. Of course they would make this as anti-serviceable as possible. I basically broke 40% of the tabs on the top plate but idc, it's going to be my beater laptop anyway!
Does anyone know if you can upgrade the processor? Is it socketed or soldered to the motherboard?
Its hot glued in place or some sort of clear glue on the corners of the chip, you can heat up the glue and pull it off. However since there is nothing to control the processor from moving you would have to glue it back on afterward.
@@pxpin89 do you know how many Ram slots it has?
@@aethro4375 Two, should have one pre installed and one should be empty.
@@pxpin89 thank you
@@pxpin89 Also are you 100% sure for 15 r254nu, bcuz i had 8 by default, currently 4gb, i wanna be concrete sure without opening up the laptop first to check if i should order an 8 gig and replace or one more 4 gig.
Question: Will I have to take off the keyboard in order to change the RAM in this laptop?
yes, in fact you need to disassembly the whole computer! :(
Including the mother board
You just need to get it where the motherboard you can look under it to slide to ram in. Not difficult at all just be careful. I broke one screw slot off. Somehow somewhere lol
HP Notebook - 15-r110na (ENERGY STAR) - sadly my version has no fan but what is really odd, HP has placed a foam type of material at the end of the HS so it blocks the air vents on the left side. How the hell is that supposed to help. lol. Maybe it is there to act as a kind of filter?
Cheers for the upload.
Where can I buy the screwdriver for the screws of the piece that goes on top of the CD drawer? The one I have doesn’t work
Do this method work on HP 15-r249TU ?
I wanted to know is it possible to upgrade graphic card and ram to make it faster for gaming I play world of warcraft and it crash's alot and lags in some places so ya is it possible to upgrade grade it to be better please let me know and what I would need thank you
did it have only one memory card slot ?!
Yup, basic HP junk. Mine was slowish right out of the box too!
Thank you so much for this video HP's plastic hinges that always break and awful design to get access to the laptop is disgusting
@joy Me too
@joy Yeah I'll throw it to the wall soon too
@@winstonlight5019 I'd throw it too, but would like to pull out the HDD, so still need to disassemble it. Then will put an 18$ SSD, clean install of Windows, and see how it runs. Too bad upgrading the memory is too much pain for me to handle.
@@joewood3546 The dollar is not used in my country though thanks but it is not worth the effort
@@winstonlight5019 I bought this computer about 5 years ago for about 300$ (meaning super cheap) to bring with me when I travel, to connect to the TV in the hotel room, to play youtube and movies, and it did fine for that. I rarely use it lately, but when I do, I notice that it got slow, though once you start something playing it's smooth. I'm thinking a fresh windows install will rejuvenate it, and an SSD should make it faster than when it was new. Hope it can serve me one more vacation. But man - that design... Did they do it on purpose? Maybe we could get to the memory module by cutting through the bottom with Dremel? :)
Is there a nvme m.2 slot?
Ty very much i had problem with this one screws behind buttons
I got to the keyboard removal and the ribbon will not detach....and the next ribbon removed, the very tiny connector....how????
Can someone tell me where the long screws go
Please can anyone tell me which hard caddy is sutible for this laptop
9.7mm or 12.7mm?
got this pc for free by an pc fix and repair shop that gave up on it xD now i understand why... i wanted to upgrade the ram on it but nvm. yeah i could do it but its easier to just wipe the damn thing, put a sshd in it and then run linux on it. gonna give it to my uncle for christmas, i hope he will be happy
you can update the processor ?
can you?
@@maximusmcmillan8098 excuse im not native english speacker
does anyone know what that tool is called that he uses from 1:36
Hello. This model is
Model: 15-G011SQ? I tried to upgrade on ssd, to this hdd, but i do not have to dissansamble, that model? I have a question.
I have during upgrade on ssd, in location to Dvd/RW?. Have work detection to Bios, on this place on SSD, into place on dvd/rw.. Thanks for your video
And wait to answer my question! Traian on Romania🤗
Hi, may be i missed where is the ram slot?
It is on the back of the motherboard you have to take the whole thing out and there is two pinch tabs that u press to pop the card out
Is the cpu upgradable on this thing?
Hello Sir, can i install ssd in hp-15 r006tu notebook. please reply
I am planning to see if I can revive a similar machine of mine. It needs the hard drive just chucked and probably the APU repasted. So that will be an adventure and a half lmao
which type of ram this model use?
I disassembled my lap just like how u shown in ur video.. And assembled again but it's not getting on.. Can u please give solution for this problem
Same with mine
Is the power button connector (blue plastic thing) well inserted?
Thank you for the detailed explanation
Am looking for battery 15g 094sa model. which battery will be compatible.
Thank you very much. Needed to upgrade ram to 8x2 .
All that just to change the bios battery?
Thank you so much from Turkey :)
I can't find if there is a slot for the M2, I guess not :(
Does someone know?
I will answer in case this is a serious question. there is no m2 slot this laptop is an old model that was created before SSD's were on the rise.
@@steef4000000 lol. Was a serious question 2 years ago when I first heard of M2 :D Thanks anyway :)
@@pablogomez8236 yeah once I saw how old the comment was I figured the answer came way too late :)
Hey Hi I LOST MY Mortherboard same one do you have motherboard datails
SIMPLY AWESOME. THANKKKK YOUUU!!
Can anyone tell me if this laptop has a m.2 port for adding a ssd?
From the video i cant figure out if it has one.
it does not. You can get an adapter but the problem is the chips on the M2 drive will sit upside down working together with the board to generate some real heat. These run hot anyway, but all in all I have had 3 of them and they suit all my needs.
what type of pry tool is that? is that just a guitar pic or a special tool?
How much ram it supports
One card 8GB max
thanks! had to replace the fan and wifi card
Thanks a lot.
You helped me (not to disassemble the laptop but to decide that it's not worth it).
Mine already has 8gb ram and an SSD so will work just fine for the next years(It'll be nice to have 16Gigs of ram and to put a better ssd inside).
Never buying an HP in the future.
anyone know the ram speeds of the ram in this laptop
I need motherboard of hp model 15-r229nx.....
So, if I want to add RAM, I need to disassemble 'til 5:28 ?! D:
Hi bro how to upgrade 😭 tell me please
Just follow the tutorial. Disassemble 'til the ram, then install the new ram, then reassemble, add the HDD, the reassemble all.
The RAM is "under everything", you must disassemble the motherboard too
Okay it seems very complicated but I do thank you bro
Bro I was checking the spec but my laptop as same as that laptop and it has 2 ram slots
Where is the processor?
TP connector broke while following the remove keyboard tray portion. Some voice audio warnings would have helped. My instincts told me to just install lightweight Linux distro as this will never run Windows 10 well, even with upgrade to SSD; I should have listened.
Perfect, thank you very much, works for hp15-r217ns
and hp 15r209nl has the same case, too.
Yes it is helpful for me also my laptop is hp 15-r218nx and you have very similar laptop to mine roberto
Same
Imean same type ofcase as shown in the video
Where to put the 2 long screws i lost my track
Where is the memory ram placed?
After 5:30 on the underside of the motherboard, light green part
What minute ram?
7:19
Is the processor upgradable?
probably soldered.
Glued apparently
Fuck i disassembled it and i assembled it a now it won't boot up
Btw thank you so mch for the video it really helped alot.
it also works for HP L6Z33EA
Thankyou so much
Great help
With this knowledge
I've learned my laptop was completely faulty. Tape around where there shouldn't be, and no cooling fan.
It's impressive how horribly designed this laptop is. Wouldn't have figured it out without your help. Cheers
Tks, ur video helped me
Thanks man! Thank you
I am not looking forward to upgrading the memory in one of these, Thx for the vid, though! cheers
Yet another video for a HP 15 that does not apply to MOST HP 15 laptops. How about giving more info on your title relating to the actual model. Like is is a 15-AYXXX, 15-ACXXX, 15-BAXXX, 15-AFXXX or 15-AJXXX? A little more info will go along ways.
Well, I wasn't able to find any videos with this type of computer.
J Boyd - Actually this is the only video I could find that has the same crappy design as mine. All the other videos looked like removing stuff was a bit easier. But only a bit
Mine didn't even have a fan in it!
Thank you for the video~
mine is hp 15-g200ne which opens just like this
Hp laptops are shit at upgradeability.. just to upgrade the RAM, you gotta take apart every piece of the laptop.. who the fuck designs these.. ive upgraded eny x360, and pavillion and this hp 15 model. and I've learnt that i have to always remove the rubber tabs for hidden screws.
Thank you I was trying to upgrade my hp laptop so I could play games and basically have way less lag
thank you very much
Mine is missing the fan💀
Where´s the GPU?
What GPU
Hp in general are the Apple of PCs. Laptops - hard to open and access anything and all these hidden screws. Desktops - too many proprietary components. Printers - good luck with 3rd party inks.
Mega thanks!