So my dad and I are installing my 52" curved light bar on my 4 runner using the Cali raised brackets. But turns out I he 7/16 drill bit was to big. So we down size to smaller drill bit, good thing it was first hole.
I know you can just run the wire down the pillar but id like to know how to connect the wire to the light bar and to the power and install the switch. (Just a lady trying to install things myself so i don't get jipped at the shops)
Hello, Check out our installation instructions via the URL below. If you still need help feel free to shoot us an email info@caliraisedled.com caliraisedled.com/pages/installation-resources
Hey man do you have any leaked of water when it rain ? I’m wondering because I’m in Canada and it rain really often here and even in winter I’m scared that it will have leak
Do you offer one for an FJ Cruiser? Looking into the Prinsu roof rack system and it appears that these are limited to 43" max light bars and considering an alternate mount system to allow for the 50/52" dual light bar.
Mounting point? That's where i needed a close up and explanation on what tool that was and does the mounting piece come with the package? Or even that mounting tool 🔧 come in the package too?
The tool will not come in the package. If you are refering to how the holes got into the A frame, We used a drill! If you have any more questions about installation please shoot us an email too info@caliraisedled.com
Really disappointed in your product. Install instructions are not in the shipping box and this video doesnt describe the size of the nut insert so i can purchase the correct tool to install them. Caliraised is dropping the ball here! Maybe you should redo this vid to include this info. I think its pretty rediculouse that you guys didnt cover the insert tool and nut sizes in the intro when describing the tools needed for install. Not very well thought out sir!
Here is a link to the brackets on our site: caliraisedled.com/collections/16-tacoma-light-mounts-combos/products/05-2015-toyota-tacoma-50-curved-brackets
Triton659 hello, the wires are run down in the gap along the windshield and the black cowling piece. They fit inside that gap and you can’t even see them. Makes for a super clean install!
@@memeboi4173 I can't wait for his answer so what I did is to force the rivet nut and the rivet nut tool. Make sure to angle it towards you {almost straight up}to avoid hitting the structure frame steel. Made few scratches though.
Bro f this, i just did it and 7/16 is not the size to go with. It left the holes too big and the bracket is super lose, if your doing this i would suggest to weld the screw tabs in.
I had that problem too. But luckily when my dad and I drilled it, it was on first hole. We ended up using 27/64 drill bit. Also as I discovered in this video, you need a rivet tool.
@@johntrinidad4091 No... What it is, is the "aerodynamics" of it now. Sure they're awesome for offloading and won't hear the wind noise with bumps and/or loud exhaust. But with highway driving you'll always hear some whistling sound at Highway speeds.
@@johntrinidad4091 I have them on my Taco and I don't mind it. They come in handy when I'm Loading up my ATV's on the trailer at night and making my way out of the desert. Besides a truck full of conversations and you won't mind it.
Hey John, there is wind noise with this particular setup. To combat this, some companies offer aftermarket solutions to be attached to the bar and mounts. Let us know if you have any other questions!
Ken Berry hello, the wires are run down in the gap along the windshield and the black cowling piece. They fit inside that gap and you can’t even see them. Makes for a super clean install!
Looks nice and all, but expected to see how you did the wiring, as in running it and where the switch was put.
We run the wires along the A Pillar. They tuck in and we use a bit of silicon to hold it in. Our kit we all comes with the switch and all the wiring.
I’m curious on how you routed the wires will be doing something similar to it soon
Me too
@@DELTA-CYPRESS i believe he tucked it into the trim between the windshield and pillar
So my dad and I are installing my 52" curved light bar on my 4 runner using the Cali raised brackets. But turns out I he 7/16 drill bit was to big. So we down size to smaller drill bit, good thing it was first hole.
What size drill bit did you use just wondering because I just ordered the same kit any insight would be greatly appreciated
The brackets might not be the same as they were in this video that was made 6 years ago.
Does these brackets come with all the nessecary hardware?
Do you have a video of where you run the wire? Not how to wire it, but where the wire gets in to the cab?
what size are the nutserts used in the door jams?
I was wondering the same thing
I went and bought a riv nut gun and its way too small
I don't want to spend another $75 on the wrong rivnut gun again.
It's an m8 nutsert
Whats the name of the tool you used to insert the nuts
I have this on my son's truck and looking help is there another way to mount the wind noise and harmonic hums are just to much is an understament.
Unfortunately thats just the downside of having a large lightbar in the open!
I know you can just run the wire down the pillar but id like to know how to connect the wire to the light bar and to the power and install the switch. (Just a lady trying to install things myself so i don't get jipped at the shops)
Hello,
Check out our installation instructions via the URL below. If you still need help feel free to shoot us an email info@caliraisedled.com caliraisedled.com/pages/installation-resources
Amazing video made it very easy to understand. Thank you!
Hey man do you have any leaked of water when it rain ? I’m wondering because I’m in Canada and it rain really often here and even in winter I’m scared that it will have leak
Anyway to get rid of the wind noise generated in the cab from the mounts moving the weather stripping?
it is really that bad? interested in buying one of these mounts.
Do you offer one for an FJ Cruiser? Looking into the Prinsu roof rack system and it appears that these are limited to 43" max light bars and considering an alternate mount system to allow for the 50/52" dual light bar.
I don't see you wiring light supply to it. So your light doesn't need wiring?
Mounting point? That's where i needed a close up and explanation on what tool that was and does the mounting piece come with the package? Or even that mounting tool 🔧 come in the package too?
The tool will not come in the package. If you are refering to how the holes got into the A frame, We used a drill! If you have any more questions about installation please shoot us an email too info@caliraisedled.com
What is the nut insert tool called? Any idea where to buy one? Is there any other way to insert those nuts?
Really disappointed in your product. Install instructions are not in the shipping box and this video doesnt describe the size of the nut insert so i can purchase the correct tool to install them. Caliraised is dropping the ball here! Maybe you should redo this vid to include this info. I think its pretty rediculouse that you guys didnt cover the insert tool and nut sizes in the intro when describing the tools needed for install. Not very well thought out sir!
What tool is that you use to put the nuts in?
That specific tool is a nutzert!
Super late lol does Cali Raised LED have the screws to mount the light bar?
Did not show where the wire run from led light to battery then to switch
What do you suggest if when you try to take the mounts off the nutzerts spin. The bolts dig into the nutzerts then the nutzerts break loose.
Hi, please contact our customer service team at info@caliraisedled.com or call 888-385-5036 for assistance with this matter. Thanks!
Hi I have tacoma 2016 and already have the light roof bar
But I do not have the brackets
Where I can buy ?
Here is a link to the brackets on our site: caliraisedled.com/collections/16-tacoma-light-mounts-combos/products/05-2015-toyota-tacoma-50-curved-brackets
How did you run the wires?
Triton659 hello, the wires are run down in the gap along the windshield and the black cowling piece. They fit inside that gap and you can’t even see them. Makes for a super clean install!
Whats up dude. Do you make mounts for a 2017 honda pilot?
It definitely looks cool flush like that but unfortunately it will fail inspection in most states as you can’t cover the windshield at all.
Jay G Incorrect Mr.G
What link do you have for your nutsert tool? Mine won't fit in all the way cuz it has bigger nose.
Yeah dude I ran into the same issue
@@memeboi4173 I can't wait for his answer so what I did is to force the rivet nut and the rivet nut tool. Make sure to angle it towards you {almost straight up}to avoid hitting the structure frame steel. Made few scratches though.
Try this link
www.amazon.com/s?k=nutsert+tool&crid=32WOYYE7DZX1W&sprefix=nutsert%2Caps%2C192&ref=nb_sb_ss_ts-doa-p_1_7
How could i do this to my 1999 tacoma
Bro f this, i just did it and 7/16 is not the size to go with. It left the holes too big and the bracket is super lose, if your doing this i would suggest to weld the screw tabs in.
I had that problem too. But luckily when my dad and I drilled it, it was on first hole. We ended up using 27/64 drill bit. Also as I discovered in this video, you need a rivet tool.
This video shows how not to ruin your truck. Also look at 6:55 sec, he has the waire tucked in with blue painters tape.
We use the blue tape to hold the wire in place while the silicon dries. It won’t cause damage to the vehicles paint.
What lumens is that bar
50,000!!
where can I buy
Bracket's?
@@josegrijalva8156 Here is the link to the product! caliraisedled.com/products/2005-2021-toyota-tacoma-52-curved-led-light-bar-roof-mounting-brackets
What size are the nutserts and do they come with the kit?
Charlie Jensen 7/16
Does anyone know how to reduce the wind noise? From 20 to 50 mph it’s whistles loud, super annoying. Any tips would be greatly appreciated!
T. rex makes a wind diffuser you can buy now. It works great.
After install my light bar is making a super annoying whistling noise when driving is there a fix for this?
Nathan Freeman that’s the problem with having a curved light bar... you gotta live with it now
@@Bluecollarfatbob Will the straight bar instead makes a difference?
@@johntrinidad4091 No... What it is, is the "aerodynamics" of it now. Sure they're awesome for offloading and won't hear the wind noise with bumps and/or loud exhaust. But with highway driving you'll always hear some whistling sound at Highway speeds.
@@Bluecollarfatbob Ok, cuz I ordered the curved one. I've seen some video that could minimize the whistling sound so let's see if it will work.
@@johntrinidad4091 I have them on my Taco and I don't mind it. They come in handy when I'm Loading up my ATV's on the trailer at night and making my way out of the desert. Besides a truck full of conversations and you won't mind it.
Hi, How is the wind noise with this set-up?
Hey John, there is wind noise with this particular setup. To combat this, some companies offer aftermarket solutions to be attached to the bar and mounts. Let us know if you have any other questions!
@@CaliRaisedLED Thank you, I did some research and there is hope to eliminate the wind noise.
Could this work on the tundra model as well?
We make a mount for the tundra.
Why can’t people give you paper instructions?
Hi Collin Blake, if you need anything specific, please reach out to us. We are happy to assist you.
caliraisedled.customerdesk.io/
Cali Raised LED
How do you get rid of the absolute screaming of the bar above 40 mph? It’s not fit for sanity.
We have not experienced any problems with the bar being loud. Troubleshoot via our customer service team or youtube. (888)-385-5036
I can not find a reason to drill a hole in a perfectly good truck
How do you run the wires
Ken Berry hello, the wires are run down in the gap along the windshield and the black cowling piece. They fit inside that gap and you can’t even see them. Makes for a super clean install!
Leaks air and water. Not cool
This light bar is whack