Thank you! I have exactly this issue on my 430X (the mower loses the signal in one location about five yards from the base station but works further away), and all four sensors go to zero. When I turned the mower over I saw that one of the bungs had been pulled out, so it seems likely that grass or water has got into the area where the sensor is located. I’ve ordered the board, so fingers crossed it is back to its happy mowing self once I fit it! I really appreciate you taking the time to post this.
I have 6 years old 430x and it has similar problems. Charging board shows green light, boundary wire is good. I just went to dealer to fix this issue because I didnt believe it would be this loop sensor. But hopefully it will solve tomorrow, it's only 60 euros part so could just try change it myself but yeah hopefully dealer solves this tomorrow.
I push my mower. It works. Don't need yet another thing I have fix in my life! Your lawn is larger, but mine still takes about an hour to two hrs to knock out once a week. Besides, I think if I had a mower that expensive roaming the front yard it would walk off! I get it. Not messing with or paying for someone to mow my lawn would great. After this crazy heat I was about ready to sell the old honda, buy a M18 mower with a LED light on it so I could mow after dark!
Your robot mower could use a little AI infusion so it does not injure itself and develop a hole through its underside exposing its circuitry. Maybe Elon has a spare Starlink chip you can use to upgrade the robot mower.
Just had that happen to mine- there’s a bearing under the skid place that I replaced and it’s golden again: www.partswarehouse.com/Husqvarna-Bearing-Housing-Assembly-HUS-588421702-p/HUS-588421702.htm
Bloody Mary pickle beer? Does not need to exist! I wouldn't get anything done with regular Bloody Mary's lol. I know where they make the best ones. I'd say to rivet a piece of sheet metal or something to that wear spot...
Yeah I need to check on that spot. I was thinking fiberglass might do the trick but metal sounds better. Maybe I should patch it with the pickle beer can!
Keep bug spray on the station. A spider shorted one of my 450xh's boards. It was wet in there and the spider touched across some circuits. It blew crazy webs then exploded.the board shorted. Keep insects out of the charging station! Also, your charging station is filthy. Blow it off and wd40 the charging metal that contacts the mower. lol
Thank you! I have exactly this issue on my 430X (the mower loses the signal in one location about five yards from the base station but works further away), and all four sensors go to zero.
When I turned the mower over I saw that one of the bungs had been pulled out, so it seems likely that grass or water has got into the area where the sensor is located.
I’ve ordered the board, so fingers crossed it is back to its happy mowing self once I fit it!
I really appreciate you taking the time to post this.
Great meeting you guys at the meet the other day. Caught up on some of your vids, the boathouse looks sick!
Great you meet you too and thanks for watching! I’m sure we’ll see you around!
I have 6 years old 430x and it has similar problems. Charging board shows green light, boundary wire is good. I just went to dealer to fix this issue because I didnt believe it would be this loop sensor. But hopefully it will solve tomorrow, it's only 60 euros part so could just try change it myself but yeah hopefully dealer solves this tomorrow.
I push my mower. It works. Don't need yet another thing I have fix in my life! Your lawn is larger, but mine still takes about an hour to two hrs to knock out once a week. Besides, I think if I had a mower that expensive roaming the front yard it would walk off! I get it. Not messing with or paying for someone to mow my lawn would great. After this crazy heat I was about ready to sell the old honda, buy a M18 mower with a LED light on it so I could mow after dark!
I believe it. The heat is real!
Super humor! Good explantation! Thanks :)
Perfect Raptor Liner opportunity.
I’ve got a bottle sitting on the shelf!
Im late but look into a mammotion luba if you havent already... satellite, no wires
Great Video I learned a lot
Your robot mower could use a little AI infusion so it does not injure itself and develop a hole through its underside exposing its circuitry. Maybe Elon has a spare Starlink chip you can use to upgrade the robot mower.
But what happens when it gets too smart…
What if the mower is making a really loud noise as it mows. How can I fix that???
Just had that happen to mine- there’s a bearing under the skid place that I replaced and it’s golden again: www.partswarehouse.com/Husqvarna-Bearing-Housing-Assembly-HUS-588421702-p/HUS-588421702.htm
This channel should be called Zero to Pickle Beer lol
We can arrange that!
Bloody Mary pickle beer? Does not need to exist! I wouldn't get anything done with regular Bloody Mary's lol. I know where they make the best ones. I'd say to rivet a piece of sheet metal or something to that wear spot...
Yeah I need to check on that spot. I was thinking fiberglass might do the trick but metal sounds better. Maybe I should patch it with the pickle beer can!
What I don’t understand is how your lawn is GREEN and still ALIVE? Mine is dead.
Due to the power of TH-cam this was filmed in the past! It’s much more brown now. Like my new beach!
@@ZeroToAwesome Can you pump and filter water to your irrigation system from the lake?
@@Danman1972 yeah, we do. Doesn’t matter with this heat though. Everything is still dying no matter how much water you give it
Keep bug spray on the station. A spider shorted one of my 450xh's boards. It was wet in there and the spider touched across some circuits. It blew crazy webs then exploded.the board shorted. Keep insects out of the charging station! Also, your charging station is filthy. Blow it off and wd40 the charging metal that contacts the mower. lol
Have you tried turning it off and on again???? 🤣🤣🤣🤣🤣🤣
HELLO THIS IS CUSTOMER SERVICE PLS REBOOT!!
I would have used flex tape