Socket weld and branch connections weld which are not radiographer shall be examined by magnetic particle or lpt methods in accordance with Para 344.3 or 344.4
sir my question is how much allowance of depht of undercut we can accept you said not exced 1mm for less or equal one by four of thickness of the weld, i didnrt understand weld that part can you clarify me please?
generally it is less that 3 percent , however it is not mentioned in any codes and standard .Please follow client requirement and how to calculate the percentage please see below . if welder did 100 joints but RT requirement is only 10%. so we took 10 joint RT. and suppose we have 2 joint repair in those RT joints than %repair = 2/10 * 100 = 20 %
subscribe my channel and get regular video.
th-cam.com/channels/YWGbHpYfpNFeEhKpZdygEw.html
When we can say this is rounded or linear indication ?
Very useful vedio
Thanks, please subscribe to get more video
Interesting video
Thanks, please watch, share And subscribe to get regular video.
Good ✨👍✨
Thank you! Cheers!
Sir can you make video on aws D1.1 radiographic testing
What is the book to look ? 31.3 book or asme sec 8 ?
Sir DPT me kitni depth tk ka defect find out kr skte hai
Dpt me only surface defect detect hota hai.. And in mpi surface and subsurface defect detect hota hai upto 5 mm depth
@@WeldingNDTInspection thank u sir👍
Hi Sir,
I have a doubt on B31.3 PWHT requirements. Could you please explain what is the minimum thickness required for PWHT for P No.1 ?
Thank you
19mm
Inside b31.3 book ?
As per ASME 31.3 what are the RT requirements of socket weld in severe cycle service
Socket weld and branch connections weld which are not radiographer shall be examined by magnetic particle or lpt methods in accordance with Para 344.3 or 344.4
Sir code book is given in the examination or not ?
What about non linear indication for ultrasonic acceptance
Depth of under cut
sir my question is how much allowance of depht of undercut we can accept you said not exced 1mm for less or equal one by four of thickness of the weld, i didnrt understand weld that part can you clarify me please?
Undercut depth is allowable upto 1 mm and the tw/4 is the length of undercut..
What's the difference between UT & DAC?
kindly share the allowable welder repair rate percentage for process piping and pipeline.
will upload a video on this ..Thanks ..
generally it is less that 3 percent , however it is not mentioned in any codes and standard .Please follow client requirement and how to calculate the percentage please see below .
if welder did 100 joints but RT requirement is only 10%. so we took 10 joint RT. and suppose we have 2 joint repair in those RT joints than %repair = 2/10 * 100 = 20 %
Sir what is meaning liner indication ( symbol F) individual lenght =
You are right.
T/10 for T less than 3 mm
0.5 mm for T from 3 mm to 6 mm
1 mm for T greater than 6 mm to 50 mm
1.5 mm for T greater than 50 mm
What is Tw sir?
Thickness of weld ..
Clear not picture
can you give me this presentation