I look forward to the next one! Loving mine, just gotta get a dry enough day to really get out and enjoy it.. I haven’t really done much with the p settings yet..
Regarding P11, it is the max amps of the controller, it is only used for the the information displayed if P10 is on(1), so I believe those with Burn-E 2 (non max) need to set P11 to 30, if they leave it at 50 the display won't accurately indicate the correct information i.e. When at using max power the screen will indicate they only using 60% of the scooters potential, if P11 is set to 50.
G day mate vids are cool well understood so well done. 1 question I have for you when I go to settings for security code 4 zeroes then it says error every time ive checked manual etc and can't find anything..really helped with your explanation of the settings mate cheers
Once you adjust all the basic and advanced settings does that pertain to “x” mode or do you have to be in “c “ mode for those adnacrd setting adjustments to be in effect
Is there an Advanced settings video? The instruction manual isn't very helpful. Also, how do I reset the trip odometer and max speed in the display? Thanks!
hold + and - for a second will reset all re settable parameters. So if you select trip odometer and hit + and - it will not only reset the trip odometer it will also reset all the other re settable modes like max speed, avg. speed etc etc. all back to nil.
I have a problem with my Burn-e Viper, i can't change my P7 setting to 0. It doest want to start plinking, when i try to change it. Do you may know the reason and sulotion? Its brand new and has only 2km on.
Hey mate, I just bought this scooter, brought it home, assembled it, turned it on and the throttle does nothing... there are no error codes on the screen and I have tried roll starting but the throttle does nothing... is there something I have missed?
Your restriction wires are still plugged in Look at the front of the frame you will see a 1 wire with a black with grey trace in plug it on both sides of the scooter
I said the exact same thing. I played around with it then wondered why they allow you to put in passcode when it unlocks with any numbers entered regardless. But I guess it’s a technique to make thieves hesitate with stealing the scooter
@@dcunplugged31 I know & I'm not trying to be a smartass, just wonder what other combination is possible as I see only two digits - it's either 1 or 0, but seriously though, what else can one put in other than 1 and 0? are there other numbers like 2, 3 - 9? or my options are only 0101, 1011, 1001,1000 and combos like that? 'cos really don't get it.
@@dcunplugged31 Great, what do you think is making the P3 in my Klima stuck on OFF. No matter how long I press the M button to make it blink, it won't, I even tried to try it in various modes like S or C & X, nothing. Is my screen always going to be on now till eternity?
![เป็นไปได้ไหม - WanMai [Teaser] | 05-12-24](http://i.ytimg.com/vi/P5Uto6e453w/mqdefault.jpg)
I look forward to the next one! Loving mine, just gotta get a dry enough day to really get out and enjoy it.. I haven’t really done much with the p settings yet..
Regarding P11, it is the max amps of the controller, it is only used for the the information displayed if P10 is on(1), so I believe those with Burn-E 2 (non max) need to set P11 to 30, if they leave it at 50 the display won't accurately indicate the correct information i.e. When at using max power the screen will indicate they only using 60% of the scooters potential, if P11 is set to 50.
I needed this video thanx a lot!!!!!!!
This was awesome, thank you!
G day mate vids are cool well understood so well done. 1 question I have for you when I go to settings for security code 4 zeroes then it says error every time ive checked manual etc and can't find anything..really helped with your explanation of the settings mate cheers
I like the new intro mate 👍
❤❤ beautiful beautiful! Explain
So helpful thanks bro
Good job DC! So when can I get my Nami Burn E??
Fluidfreeride
Thanks for the vídeo it really worket
Once you adjust all the basic and advanced settings does that pertain to “x” mode or do you have to be in “c “ mode for those adnacrd setting adjustments to be in effect
How do you make throttle more responsive?
You buy thirdparty throttle... i can see it as the only sulotion.
Is there an Advanced settings video? The instruction manual isn't very helpful. Also, how do I reset the trip odometer and max speed in the display? Thanks!
hold + and - for a second will reset all re settable parameters. So if you select trip odometer and hit + and - it will not only reset the trip odometer it will also reset all the other re settable modes like max speed, avg. speed etc etc. all back to nil.
Brillaint video,
My nami heat setting is 155 from factory is that wrong?
Yup! Me too…155????😊
@@policianluta but is that correct then?
When will you do the advanced settings? Pls do a thorough job when you do the advanced settings!
Does the qs motor have p settings?
Thanks for the review
Can you set max speed ?
how do you reset the Trip km
How do you turn the pin feature on to start with mine just powers straight up
Someone would have active the password thing
Can go and change it via the settings
How do you turn that feature on tho
I have a problem with my Burn-e Viper, i can't change my P7 setting to 0. It doest want to start plinking, when i try to change it. Do you may know the reason and sulotion? Its brand new and has only 2km on.
I have the exact same problem mate, with the Burn E2 Max. Driving me nuts. did you find a solution
Are you trying to turn turbo mode off ?
@@dcunplugged31 I found out what it is. If you buy an EU model it's flashed so you have to push start it. So requires flash to remove the P7 to 1
they come with NFC key now
Hey mate, I just bought this scooter, brought it home, assembled it, turned it on and the throttle does nothing... there are no error codes on the screen and I have tried roll starting but the throttle does nothing... is there something I have missed?
Your restriction wires are still plugged in
Look at the front of the frame you will see a 1 wire with a black with grey trace in plug it on both sides of the scooter
@@dcunplugged31 you are on the money. Cheers mate, the throttle works now 👍
@@TheCardinal365 not a problem 👌 enjoy your ma man definitely wear a helmet 😉 hahaha
@@dcunplugged31 always wear a helmet and protective gear. Had a couple of quick scooters prior but the Nami is alien tech in comparison 👽🤙
My nami burn e 28 ah is 72volt ...on p11 its on 50 should i change it as thats the burn e max ..appreciate anyones help?
Heyy I have 30ah what’s the fastest you been ?
P14 doesnt work for me , put in an incorrect code and still lets you in
I said the exact same thing. I played around with it then wondered why they allow you to put in passcode when it unlocks with any numbers entered regardless. But I guess it’s a technique to make thieves hesitate with stealing the scooter
Great fucking video!
My nami doesn't let me turn p7 to 0 and it stays at 1
@Marco Chonaille Thanks guys, do you know where we can get the firmware for this? I have the exact same problem
Where is the Nami viper range extender
What is the size of the screen?
A little bit bigger than a credit card
I dont have a nami burn e max or 2
I have a nami burn e
But, since I know your code is 4x 0 then, I can steal you scooter! or am I missing something? ok 4x 1 & I'll still steal it.
Your missing alot hahahahaha I changed the pass key to that for this video. Hahaha I'm not that silly 😜
@@dcunplugged31 I know & I'm not trying to be a smartass, just wonder what other combination is possible as I see only two digits - it's either 1 or 0, but seriously though, what else can one put in other than 1 and 0? are there other numbers like 2, 3 - 9? or my options are only 0101, 1011, 1001,1000 and combos like that? 'cos really don't get it.
There's 4 spaces and numbers from 0 to 9
@@dcunplugged31 Great, what do you think is making the P3 in my Klima stuck on OFF. No matter how long I press the M button to make it blink, it won't, I even tried to try it in various modes like S or C & X, nothing. Is my screen always going to be on now till eternity?
Ment to tap mod not hold it use the plus + and - to go up or down for the timer
I hope your next settings video will be explained better
bro you never actually made the advanced video settings. what gives?
Ya he did
where did you find the vid?@@chaseanderson8518
its up there ma man
Your instructions are not helpful at all, especially at P14 which is the most important setting and you did not make anything clear!!
Roderick please explain to me what you don't understand so I can better help you.
damn you rederick