@@DarksouIjah 5 foot 10. I would think 6 ft would be the max for this freezer in my opinion. It’s not super roomy for me. I do have enough room to dunk myself underwater but it’s kind of tight
@@FuelFitnessCo Thank you for the quick response. Damn, I was hoping you were my height. I’m 6’1” and thin. That freezer you bought is the perfect one for the price.
@@DarksouIjah yeah for the price it’s pretty hard to beat. You could fit in there for sure, but it would just be a little more tight. I think even someone taller than you could fit, it’s just they would be cramped up, kinda like those cheap small plastic tubs you see that they have to sit Indian style in. All that to say, it would work, I just want you to know what you’re getting into. If you want to really sprawl out, and have lots of room, you may want to spend extra to go with a bigger size
I am in the wiring phase of my set up now. Big question on the main inkbird for the side of the freezer for heat. I’m in sac we get pretty hot too. Have you found that the external inkbird was worth it? Is the side still your location for measurement? Mine will be outside and I haven’t gotten an external inkbird yet.
Great question. Here in NC it never got hot enough in our hottest months to make it worth it. Hottest it got in there was 95 degrees and the freezer is rated for 115 I believe. I still have it set up, but it may have been overkill
Are you able to be fully submerged (to the neck)? It’s not too narrow at the shoulders? Sorry for the 21 Q’s but the vid of you in is pretty quick. I’m 6’ and wanna make sure I’m good to pull the trigger
@@jesserivchin8163oh yeah I can submerge to my neck. Its a little tough to do but I also dunk my head under ever time by laying back. As far as the width goes, I would definitely say measure your shoulder width and check the dimensions. I don’t have very wide shoulders, I imagine someone pretty broad might be a little tight in there in the shoulders.
Damn. Your break down of this project is perfect. You got a new subscriber
🙏 thanks so much!
How tall are you?
@@DarksouIjah 5 foot 10. I would think 6 ft would be the max for this freezer in my opinion. It’s not super roomy for me. I do have enough room to dunk myself underwater but it’s kind of tight
@@FuelFitnessCo Thank you for the quick response. Damn, I was hoping you were my height. I’m 6’1” and thin. That freezer you bought is the perfect one for the price.
@@DarksouIjah yeah for the price it’s pretty hard to beat. You could fit in there for sure, but it would just be a little more tight. I think even someone taller than you could fit, it’s just they would be cramped up, kinda like those cheap small plastic tubs you see that they have to sit Indian style in. All that to say, it would work, I just want you to know what you’re getting into. If you want to really sprawl out, and have lots of room, you may want to spend extra to go with a bigger size
Thanks!
Big thanks for the follow!!!
I am in the wiring phase of my set up now. Big question on the main inkbird for the side of the freezer for heat.
I’m in sac we get pretty hot too. Have you found that the external inkbird was worth it? Is the side still your location for measurement?
Mine will be outside and I haven’t gotten an external inkbird yet.
Great question. Here in NC it never got hot enough in our hottest months to make it worth it. Hottest it got in there was 95 degrees and the freezer is rated for 115 I believe. I still have it set up, but it may have been overkill
BRRRRRrrrrrrr!❄
Cold life!
Thanks for this post man I was looking at that exact freezer and wasn’t feeling confident on the dimensions. How tall are you?
Thanks for tuning in!! I am 5”10 and it works great for me.
Are you able to be fully submerged (to the neck)? It’s not too narrow at the shoulders? Sorry for the 21 Q’s but the vid of you in is pretty quick.
I’m 6’ and wanna make sure I’m good to pull the trigger
@@jesserivchin8163oh yeah I can submerge to my neck. Its a little tough to do but I also dunk my head under ever time by laying back. As far as the width goes, I would definitely say measure your shoulder width and check the dimensions. I don’t have very wide shoulders, I imagine someone pretty broad might be a little tight in there in the shoulders.
Sorry another question I could find an answer for. Did you put any foam or wood support under near the freezer?
@@jesserivchin8163 great question! Yes I put 2x4 blocks of wood underneath for support
How has your seal job held up?
It has held up great! No issues or leaking whatsoever.