If I had bought that yellow z, first thing would of been to get that dealer crap off the back of the car. Just a pet peeve of mine hate bumper stickers and the like on nice cars.
I haven't had a chance to do anything to that Yellow Z06. I bought it mid December went on vacation and I've been working 6 and 7 days a week. I will take off the stickers I don't like them as well.
Looks like I will possibly get to see the yellow Z06 running around down here in TN when it’s done. I’m only about 15 mins from Lenoir City. I always said I would bring my next car to you guys. I’m glad to see someone down here knows where the experts are.
As always, great videos, great detail and great workmanship! Keep up the great work. I'm a mustang man but watching your channel, well your bad on me as I'm looking to purchase a C6 ZO6 and what immediately to change out the heads to Advanced Induction Ported, ported intake you use, B3 Cam from you and of course your tune on full exhaust as well. I saw numbers as high as 650hp to the tires from your combo which is more then well respected numbers especially with NA, think the ZO6 LT4 is 75hp under that! So I'm seriously looking now thanks to you for a C6 ZO6 but I will need pistons as I plan boost and a decent amount! How much power can the factory rods and crank handle and be somewhat reliable? Thanks for the info and content
My vette did the same thing at the track, when to limp mode checked everything no leaks or anything started it back up everything fine but I think it’s the battery idk yet
Would love to see you guys do an episode of your thoughts of what it's like to work on the C8 once you've had a chance to get hands on with one in the shop. It looks like a bit of a pain to do plugs or heads on it unless you drop the engine out from under? Can it even fit a supercharger? etc.
I'm always surprised by how many folks send their car for more power while it obviously needs basic maintenance like a clutch, brakes, etc. I'm just glad this customer wasn't one of those "I'll do that later on the cheap" types. That drives me crazy.
@@jessemcdougall-douglass162 a clutch is designed to wear like a brake pad. It's necessary for safe and efficient operation. It's 100% basic maintenance. It should always take priority over something non essential. Period.
@@TruckinSongster It is by no means whatsoever BASIC maintenance. You routinely remove and inspect your clutch? Do you road race or drag race your car weekly or something? Sure, for someone who regularly races their car as it was meant for (
The red F-Body, Fran, own that car? By the way awesome video as always i watch all your vids, through my android. From now on i will make sure to still give 2 thumbs up each week..
I haven't watched the channel for over a month. And now I binged like 8 episodes. I forgot how much you guys make me laugh. Thanks for the awesome content and great distraction from all the Bullshit!!!!!👍👍👍👍👍
Why does the camera person keep highlighting the license plates? It would seem to me that the owners would not appreciate their information distributed online?
Lol no one is highlighting license plates... the exhaust is right there. However we do like to show that our customers come from all over the U.S and even outside of it. If someone doesn’t want their plate shown they will tell us and we can take it off. You don’t drive around on public roads without a plate do you? Don’t be so worried about other people.
I really dig watching Matthew install the clutch, it's kind of cool to see some of the steps of install besides inserting buttslayers.
Bro just the start of this video had me on my toes lol look at Eric’s face lmao man this gonna be a good one.
If I had bought that yellow z, first thing would of been to get that dealer crap off the back of the car. Just a pet peeve of mine hate bumper stickers and the like on nice cars.
Agreed. Unless the dealership intends to pay you for the advertisement.
Same same, I always have the dealership put them in the body shop.
I haven't had a chance to do anything to that Yellow Z06. I bought it mid December went on vacation and I've been working 6 and 7 days a week. I will take off the stickers I don't like them as well.
@@garryhagins9092 Cool man. Sweet car about to be even better. Sorry bout the critic just my own peeve.
@@KalebKronic hey no big deal I didn't take offense. I like my car and bought for under 29K just need some time to get it into shape
Looks like I will possibly get to see the yellow Z06 running around down here in TN when it’s done. I’m only about 15 mins from Lenoir City. I always said I would bring my next car to you guys. I’m glad to see someone down here knows where the experts are.
You know its a reputable shop when you got customers willing to drive 12 hours away to have work done on their cars
lol_ speed3 I totally would have them work and tune mine if I was closer
@@chaserzr1251 no doubt
I researched many shops and a buddy (Matt Krystofik) of mine had some work done at the RPM on his Z06. I am happy with the results.
They are awesome. I live five minutes down the road . GTO n truck went there
Why someone would drive 14 hours just to do heads when that's their ONLY mod on the car I have no idea.
I’ve personally ridden in this car and I can tell you it’s spotless; and runs amazing. It’s got crazy power. Should be even better with new clutch.
Are you talking about the yellow Z06?
No red C6 super charged.
When I had my car on the dyno I had the same type of graph as that yellow Z. RIP clutch
As always, great videos, great detail and great workmanship!
Keep up the great work.
I'm a mustang man but watching your channel, well your bad on me as I'm looking to purchase a C6 ZO6 and what immediately to change out the heads to Advanced Induction Ported, ported intake you use, B3 Cam from you and of course your tune on full exhaust as well.
I saw numbers as high as 650hp to the tires from your combo which is more then well respected numbers especially with NA, think the ZO6 LT4 is 75hp under that!
So I'm seriously looking now thanks to you for a C6 ZO6 but I will need pistons as I plan boost and a decent amount!
How much power can the factory rods and crank handle and be somewhat reliable?
Thanks for the info and content
Eric was about to blame the tuner!!! lol, Erics face was classic!
Im really surprised y'all haven't incorporated a lift into the dyno setup yet!!!
Fran is a beast, he knows his shit!!!!!
My vette did the same thing at the track, when to limp mode checked everything no leaks or anything started it back up everything fine but I think it’s the battery idk yet
It’s not the battery. It’s a tuning issue
RaceProvenMotorsports really? Y’all figure out what it was with the tune?
Would love to see you guys do an episode of your thoughts of what it's like to work on the C8 once you've had a chance to get hands on with one in the shop. It looks like a bit of a pain to do plugs or heads on it unless you drop the engine out from under? Can it even fit a supercharger? etc.
Is it ok for a new clutch to go straight to the dyno? Because I’m stressing bout it on mine lol?
Question, do those RST Mcleod twin clutches make noise at idle?
Excellent job fellas.
THE CORVETTE WHISPERER.....LMFAO :-P
I was wondering if any cars messed up on the dyno!!!💪👍✌
I'd like to have that 4th gen Camaro sitting in the back
The look on Eric’s face is priceless
I'm always surprised by how many folks send their car for more power while it obviously needs basic maintenance like a clutch, brakes, etc. I'm just glad this customer wasn't one of those "I'll do that later on the cheap" types. That drives me crazy.
Clutch job is definitely basic maintenance like airing up tires, oil change, etc. Lol
@@jessemcdougall-douglass162 a clutch is designed to wear like a brake pad. It's necessary for safe and efficient operation. It's 100% basic maintenance. It should always take priority over something non essential. Period.
@@TruckinSongster It is by no means whatsoever BASIC maintenance. You routinely remove and inspect your clutch? Do you road race or drag race your car weekly or something? Sure, for someone who regularly races their car as it was meant for (
LT SS sitting in the background 😍
Good stuff as usual boys
The exhaust on that yellow Z is sticking WAY out! Supposed to be like that?
Fran the Corvette whisperer.
The red F-Body, Fran, own that car? By the way awesome video as always i watch all your vids, through my android. From now on i will make sure to still give 2 thumbs up each week..
Yes it’s Frans car
When your the corvette whisper you hear all 😎😎😎😎
The mighty Whisperer
putting accessory bracket on before head bolts and torqued?
Well wasn’t expecting that
They may call you that but they call me the Space Cowboy.
FINALLY. Hundreds of episodes and something FINALLY dies on the dyno. Kinda. :P
Hahaha P2101 or P1516 will scare the shit out of anyone on the dyno 😂😂😂😂😂
Fran is always on his phone... no lie
What microphone are you using on your camera? Sounds good 👌🏻
Rode videomic
Wish y’all could come to Tx2k
Matt looks like hed be alot of fun...about as much fun as a colonoscopy
Youu boyss likee Mexicooo???? Wheeee 😂😂. Shout out to MRL
The fake black smoke in the click bait pic is great. lol
If you said “it has meth” here in California all the tweakers would come running to your shop 😂
15:38 You Boys Like Mexico!?!?!?!?!? Hooo-weeee!!!!!
I haven't watched the channel for over a month. And now I binged like 8 episodes. I forgot how much you guys make me laugh. Thanks for the awesome content and great distraction from all the Bullshit!!!!!👍👍👍👍👍
Eric all angry up in the background 24:57
SUPER TROOPERS!!! Hahahahaha
@13:26 I though you didn't work on 4th gen LT-1 cars. 🤔
We don’t, that’s Frans car hasn’t worked on it in probably 8 years
14 years
-Fran
@@RaceProvenMotorsports WOW! Ok!
I love it my guys rpm keep up the work and love video and I love c6 z06 💯💯💯
Serious question would y’all work on a ls7 Swapped bmw e92?
Not without a holley ecu
Red Targa top c6z 🤤
Nice!!
AI heads are made in Mexico? They do good work!
No. They are in NC
Ah ok. I was confused lol
Oh the gaskets are made in Mexico. Ok that sounds probable
Wish it was click bait RIP
Disturbed's version of Sound of Silence sucks. Fight me. lol
agreed
Was up peeps
Correct pronunciation is a-CRAP-o-vich. Watch the video. It’s hilarious
Why does the camera person keep highlighting the license plates? It would seem to me that the owners would not appreciate their information distributed online?
Highlighting?
@@RaceProvenMotorsportsYes, if you review your video you 2 times focus, and zoom in on the clients license plates.
Lol no one is highlighting license plates... the exhaust is right there. However we do like to show that our customers come from all over the U.S and even outside of it. If someone doesn’t want their plate shown they will tell us and we can take it off. You don’t drive around on public roads without a plate do you? Don’t be so worried about other people.
Whos red f body and why so neglected 😫
Frans
RaceProvenMotorsports of course it is
Liked
491 hp I’d sell it.
Damn...PG-13 could say “shit” but you guys can’t
Last time I was this early I caught my wife cheating
Yeah...sorry about that...she told me you were dead.
Last time these type of comments were funny, never.
Uh-Crop-Uh-Vich exhaust.
Wtr?
Can’t beat the first comment sorry