I can't even begin to explain how excited I am to get that stock exhaust off the bike. Freaking thing weighed in just under 30 lbs and look horrible. Can't wait to see how much we weight we save with the new akra full titanium system! Get entered to win this beast here! www.patreon.com/campisicustoms
Our Japanese friends know how to put a bike together. Must be so nice for Dado to work on this compared to the over complicated Italian stuff! Akro time🍻
I’m thoroughly enjoying this non-Ducati build. I love the ducks but its cool to see something different. I am patiently waiting on the M1000RR build, thats by far my favorite bike out there right now
You can get an ECU flash that will delete the servo motor so you can just remove it completely, that way you don’t need a servo buddy. That’s what I did on my MT10. Tune is from TwoWheelDynoWorks.
full austin racing would give you the feeling of more torque pull than the akro system even though the bike will make roughly the same rear wheel horse power of 190 after a flash. the feeling is noticeable and i think it is because the akro system has a tapered mid pipe that reduces in diameter right at the join in the two pipes into one, maybe trying to give some back pressure but the larger diameter of the austin racing or the racefit growler x exhaust and link pipe lets the exhaust flow free and it is noticeable, feels like 5 hp extra. nice bike, hope they update the r1m next year for a brand new build rather than an update and next year will be 25 years since the introduction of the 1998 r1 so i think that might have some significance on an evolution of the bike.
Hey Jaret, I remember seeing that gray older honda cbr w/ orange wheels in one of your videos, I like it so much that I went through like 10 of your videos to show it to my wife but I couldn't find it. Anyways I would love for you to film it in detail and maybe rev it for a min in your upcoming videos. Thanks. The R1 is coming along pretty nice!
Hey Jaret would you every consider putting a vandemon exhaust system on a up coming bike build there up there with the best in the business quality is top notch
Drinks, eats, laughs, makes fun of dozers balls, films, edits, laughs again, spends a ton of money to make these builds happen, says "damnit dado" a few times off camers then rides the bikes. Oh and learns a good bit along the way.
@@atlasr1339 swapping out the headers should definitely make a noticeable difference and you will benefit from a corrected A/F map however I don't think you are going to experience any serious problems if you don't flash it.
Hey Jaret, I was wondering since you've removed the exhaust. I've been looking for a stock mid pipe. If the one removed isn't gonna used mind shipping it over to me in Singapore✌️
Who knows more people with bikes. You or 650ib? I want a a comparison video between specifically gear boxes, in 2020-21 panigale v4(s) vs 2022 stock v4(s). Both broke in.
Amazing 🔥❤️❤️, Bro, I am 5"2 height.if i am gonna buy the r1 m in next 2 years , is it possible to ride the bike.it's a dream bike for me and many people like the same height.
Christina is 5'4 and she can't touch the ground on the R1M...they are not friendly to shorter riders. You can purchase a lowering link and see if that would work but something like a gixxer could work much better since they have a lower seat height from factory
I can't even begin to explain how excited I am to get that stock exhaust off the bike. Freaking thing weighed in just under 30 lbs and look horrible. Can't wait to see how much we weight we save with the new akra full titanium system! Get entered to win this beast here! www.patreon.com/campisicustoms
Our Japanese friends know how to put a bike together. Must be so nice for Dado to work on this compared to the over complicated Italian stuff!
Akro time🍻
That's exactly what we were saying! Really enjoying working on this bike :)
Just cheersed a nice glass of Four Roses Single Barrel yesterday to toast my new place for the year.
Cheers! And congrats on the new place!
I’m thoroughly enjoying this non-Ducati build. I love the ducks but its cool to see something different. I am patiently waiting on the M1000RR build, thats by far my favorite bike out there right now
Hopefully once this weather cooperates we can get Christina's bike build going as well!
You can get an ECU flash that will delete the servo motor so you can just remove it completely, that way you don’t need a servo buddy. That’s what I did on my MT10. Tune is from TwoWheelDynoWorks.
I actually think the bren flash does that as well so I'll probably send the servo buddy back if that's the case
@@JaretCampisi yeah I’m sure they do!
Man, I’ll never complain about working on my Harley, it’s not as fast as a sport bike, but they are so much easier to work on. Loving this series.
Yeah most american products are much easier to work on for sure
But you have to work on it so much. It's a Harley...
finally the manager weldone 👍
So glad you could get that exhaust off! That acrapovic is gonna sound great!!
That video is coming wednesday so stay tuned!
full austin racing would give you the feeling of more torque pull than the akro system even though the bike will make roughly the same rear wheel horse power of 190 after a flash.
the feeling is noticeable and i think it is because the akro system has a tapered mid pipe that reduces in diameter right at the join in the two pipes into one, maybe trying to give some back pressure but the larger diameter of the austin racing or the racefit growler x exhaust and link pipe lets the exhaust flow free and it is noticeable, feels like 5 hp extra.
nice bike, hope they update the r1m next year for a brand new build rather than an update and next year will be 25 years since the introduction of the 1998 r1 so i think that might have some significance on an evolution of the bike.
Do you have a link to the austin racing full system I couldn't find one...
2020 and up went back to stainless headers. 15-19 have titanium headers.
I just confirmed this as well today you are correct sir
Dado can basically do everything. Dado aka mr. Everything 🔥 Wish you, dado and your fam good health. Cheers mate 🍻
Yeah he's the man!
Wish dado the best with all of his ventures🙏🏼🤙🏼
Jefferson also does a aged at sea edition. Also a great choice. Cheers!
Dado's Ranch is SMOKIN'!!!!!! LOL
6:38 he’s looking like I told you that’s where a lot of the sound comes from as you where saying 😂
Here we go full titaniunm.... "yeasssss" 🤙🏴🥃🏴
Campisi customs are the best thanks guys for another wonderful educational video👍👍👍
Your welcome man thank you for watching!
Can't wait for the next part
Been waiting for this video ever since you bought the R1M
I thoroughly enjoyed this mod!!! Braaappp!!!
New exhaust vídeo up next asap
Can’t wait to see this build complete
"😂😂😂 I got sick of jaret holding the flashlight lolololol"
Hey Jaret, I remember seeing that gray older honda cbr w/ orange wheels in one of your videos, I like it so much that I went through like 10 of your videos to show it to my wife but I couldn't find it. Anyways I would love for you to film it in detail and maybe rev it for a min in your upcoming videos. Thanks. The R1 is coming along pretty nice!
Awesome. Can't wait to hear that bad boy fire up
Looking good! Love the first mod :) Keep it going!!! Dado is da man lol.
My 2023 R1M came with TI headers (EU). So weird that you don’t have them. They are lightweight and very blue colour.
Hey Jaret would you every consider putting a vandemon exhaust system on a up coming bike build there up there with the best in the business quality is top notch
I've never tried one but if they make a full system for a bike we build I'd def check it out
Does Jaret do anything or Dado just the man lol? Love the videos guys.
Drinks, eats, laughs, makes fun of dozers balls, films, edits, laughs again, spends a ton of money to make these builds happen, says "damnit dado" a few times off camers then rides the bikes. Oh and learns a good bit along the way.
@@DadoRados that sounds about right :)
Told you guys, come to south texas guys!! Hit 90s yesterday already! I need some peeps to ride with.
dude you should buy the Indian Scout now
4:22 wtf it cut out before the sip!! I love the reactions 🤣
321 people u subscribed due to this 🤣
Sounds amazing!!
That's my all time dream bike.
finaly i had been waiting keep doing what you are doing
Hi mate the start is great but can you please put in the video how you see out of bike mirrors. Cheers.
anyone know if you can bring a Gopro at the gates at Circuit of the americas on race day??
nice moto vlog sir. dado is an expert 👏
Anouther bike Anouther busy build day!
Great video and the bike looks like fire with all the cancer removed for sure. 😄 cant wait for the exhaust and tune to put on!
Love you Jaret Sir❤️❤️❤️❤️❤️❤️
Your Builds are awesome❤️❤️❤️❤️
Love your Vlogs❤️❤️❤️❤️🔥
Thank you so much! Lots more coming!
You should definitely do a gixxer build one day.
Excited for this build. Hope to win this beast.
OH NO I wonder if my 2021 R1 has stainless headers too....I thought they were titanium 😨
I just confirmed today that they are in fact stainless
@@DadoRados thanks for the confirmation Dado!!! Guess I have a bit more to spend on the exhaust after all. I wonder if I'll need a new BT moto flash?
@@atlasr1339 swapping out the headers should definitely make a noticeable difference and you will benefit from a corrected A/F map however I don't think you are going to experience any serious problems if you don't flash it.
@@DadoRados You're the man Dado. Thank you
Hey Jaret, I was wondering since you've removed the exhaust. I've been looking for a stock mid pipe. If the one removed isn't gonna used mind shipping it over to me in Singapore✌️
What's the fairing made of?
damn that sounds good, specially without the muffler lol, it popped and banged also wow
Wait till you hear it with the full akra system!
what mix was dado listening to
have dun the video on install of new muffler exhaust
Great video....LOVE FROM INDIA!!!!
I love it that the motorcycle more upgrade in stock Vs New accessories
It's great that you reduce weight on the bikes that is modified however that will affect the spring rates in the shock & forks...
yeah we can always set up the suspension again after all the mods...ideally it should be set up for the new owner anyway :)
@@JaretCampisi thanks for your reply 👍
Hi Jaret
Great videos what do you do with all the parts that you take off 👍
Depending on the parts I send them along with the new owner, send them to motomillion or give them to Dado
Cool 👍
You should powder coat the swing arm black. 😏
With that the center of gravity will be higher. Therefore you will have to remove weight from the top of the bike now.
we already have with the tail tidy, mirror and turn signal delete with lots more coming
Who knows more people with bikes. You or 650ib? I want a a comparison video between specifically gear boxes, in 2020-21 panigale v4(s) vs 2022 stock v4(s). Both broke in.
this beast wants no akra but a sc project 😫😫
I’d like to know if that is actually a Titanium piece or not lol My Akra Evo2 is years and years old, and it still looks fantastic
And I have never took them off and sanded them or anything like that, just normal wipe down’s
Would love to see u do a gsxr 1000 2222 build
It's no surprise that it's easier to work on literally any other bike. Ducati is some bull shit.
Do a gsxr1000 next definately a good bike to modify
Where is what's her name? Haven't watched a video of his in well over a year.
Brother you need to upgrade your camera to sony a7s3 cause you current one does not want to focus at all.
I would drink too, but I’m currently working in Kuwait
Jaret do I hear you saying "Server Buddy"?
DOZER!!!!!!!!!!!!!!!
I had thst yestwesay good stuff !!
Ya strange, headers not Titanium!
Wow its almost 13kg my good???!!!!
I am your big fan 👌
Cooooooooool🔥🔥🔥
Wow 😮❤️👍🤗🙌👏🙏😁✌️👌💥🔥⚡🏍️👋🇵🇭
lessggo my G!
The headers are titanium 🤦🏻♂️ the aftermarket system is much better by loads but yes the stock headers are titanium….
Anyways I looked into the part numbers they were titanium up to 2019 so 2020+ they are stainless.
R1M used to have titanium headers but they stopped doing it for cost cutting so ours were not :)
Amazing 🔥❤️❤️,
Bro, I am 5"2 height.if i am gonna buy the r1 m in next 2 years , is it possible to ride the bike.it's a dream bike for me and many people like the same height.
Why not
A gixxer is your best bet if you are on the short side
Christina is 5'4 and she can't touch the ground on the R1M...they are not friendly to shorter riders. You can purchase a lowering link and see if that would work but something like a gixxer could work much better since they have a lower seat height from factory
If only you could also show KG as well when comes to the weight, will be really helpful, but 28lbs sounds really heavy!!!
2.2 pounds per kilogram 12.7 kilograms
My dad owns 2 Yamaha tw200.
😎
First step to getting the r1m the way yamaha wanted it before all the stupid f@cking rules they have to adhere to ! Remap next.
20+ R1's dont have ti exhaust.
Plz more GSXR 🙏🏼
Second no more duc's
You made a 15 min video just for removing the exhaust?
You really need to edit videos better
You need to comments better… because your comment is pointless
@@stfu7800 really how come?
These aren't DIY how to videos but fun, entertaining and sometimes educational/ informational. Removing Factory Parts can be boring.
Poozuki lol
Yamahahahahahahahahahahau