A very unique and best way to clean heads, i used to spray alcohol in the head from top that would clean too but disadvantage in that method is that ink mixing and contamination occurs inside the head after which nozzel flush needs to be done, from now onwards i will use your method....
@@dtgdtfdiy True i started to see ink mixing issue, thanks for being so caring... i had seen that in other videos, and yes that damages the head, ur knowledge and experience 10/10
Sorry sir, i didn't get your question. Please whatsapp us @ +91 9699998080 will surely try to help you. Also share a video so we can understand and help you out quickly.
Can you help me out? I'm having perfect prints but if I print too close to the edges I get Vertical scrapes on the left and right side about 2 inches from the right and 1 inch from the left. Something is scraping it while the it comes out. They are straight lines always in the same spot. I just started getting them.
I have another question. I have an error of "parts inside printer are near end of service life". I think it was from my waste management. I cleaned it out (It was full) but how do I get rid of the error?
@@dtgdtfdiy Would that be safe in my model? I bought a complete set up one dtf xa30. But it's technically a R1390. Should that have already been installed? And I wanna thank you for your replies and time. You helped me out.
That is the one i have been looking for. Much appreciation, am gonna do it
sure thing... let me know if you need any further help....
Hello. Did you have the problem that it printed spots on large pictures, that the whole picture was not nicely pressed
It doesn’t print any kind of spots. This might be due to fast curing , you could see watery spots on the print. Its due to trapped moisture
A very unique and best way to clean heads, i used to spray alcohol in the head from top that would clean too but disadvantage in that method is that ink mixing and contamination occurs inside the head after which nozzel flush needs to be done, from now onwards i will use your method....
Thank you 🙏🏻
Also make sure you dont force inks with high pressures.
It might damage themal and head will start mixing colors inside it.
@@dtgdtfdiy True i started to see ink mixing issue, thanks for being so caring... i had seen that in other videos, and yes that damages the head, ur knowledge and experience 10/10
What solution are you using? Did you make it yourself? If so what is in it
Its rubbing alcohole
ISO propyl.
We keep water to isp ratio 30:70 makes it hard solution
50:50 makes it soft 🙂
Sir kindly tell about which solution is used on it ?
Which solution as in !?
Dear sir are you not using white ink circulation? 🧐
No
On this printer there white ink circulation is not installed.
SIR which printer is best L1800 or L805
L1800 better quality and versatile for a3 also
Hello Sir white ink is not coming after I replaced damper and maintenance .
Check all nozzles are open
Flush inks and charge once
Further help you can call 8655556060
Can you help me rectify; my white doesn't balance print on coloured print. It's always shifting.
Sorry sir, i didn't get your question. Please whatsapp us @ +91 9699998080 will surely try to help you. Also share a video so we can understand and help you out quickly.
L805 exit tray ka price kya hai ??
Yes
🙌🏾👍🏾
Thank u 🙏🏻
Thanks for sharing these useful tips🙂🙏🏻
Welcome 🙏🏻
Happy to help
Kindly?? Tell me
Can you help me out?
I'm having perfect prints but if I print too close to the edges I get
Vertical scrapes on the left and right side about 2 inches from the right and 1 inch from the left. Something is scraping it while the it comes out. They are straight lines always in the same spot. I just started getting them.
There re small pickup rollers placed above front feeding rod.
Clean all of them.
@@dtgdtfdiy ok thanks.
I have another question. I have an error of "parts inside printer are near end of service life".
I think it was from my waste management. I cleaned it out (It was full) but how do I get rid of the error?
@@SuperNuttyPuddyBuddy Download epson resetter tool ( adjustment program ) are reset waste ink pad counter )
@@dtgdtfdiy Would that be safe in my model? I bought a complete set up one dtf xa30. But it's technically a R1390. Should that have already been installed?
And I wanna thank you for your replies and time. You helped me out.