ฝัง
- เผยแพร่เมื่อ 28 ก.พ. 2022
- Do you want to turn on your computer from anywhere via the Internet. If you want, watch this video
1. Enable Wake on LAN feature on Windows 10
2. Router configuration
- IP & MAC Binding
- Port Forwarding : 9
3. Dynamic DNS
4. Enable Wake on LAN in BIOS or UEFI
5. WOL Client
- depicus.com
Keyboard Razer amzn.to/44YtYcA
Please HELP ME 10K subscribers
#bth #wol - แนวปฏิบัติและการใช้ชีวิต
I followed every step but it doesn't work... It says "Magic Packet Sent To ..." and the IP address is the same as the one in Dynu in the target compuetr, but it doesn't turn it on. Can you help me out?
1. The Setting wake on LAN in Windows is for sleeping PCs. Not for shutdown ones. So you can even skip this step. When the PC is turned on by wol of the BIOS the operating system does Not Care how it is turned on. It will Just Boot as Always.
2. How is your DNS supposed to be updated when the PC is Shut down? If you got a Provider who Updates your Public IP every 24h (Like 99% of the world) you won't be able to Turn on this PC after 25h. A better solution is to Install the Update Client on a PC/Server/IoT which is constantly connected and turned on. Or even better solution: good Routers also Support DynDNS. Let the Router Update the DNS. For both of the solutions you are Sure your DNS is Always updated, so you can Always Turn on the PC.
it depends on the computer's hardware and settings. Some computers may support waking from a completely powered off state (S5), but this requires specific BIOS/UEFI configurations and network adapter capabilities
When PC is in shutdown state, there should be an option in BIOS which governs how the power delivery influences the cycling. Depends on the motherboard. Some even have an option to power up a PC with a mouse click. There should be an option about the network card being able to power cycle the machine. You must be aware that you may have a motherboard which doesn't support this and you won't be able to use wake on lan.
So i can use to Wake up my Work P.C from home or vs versa using this??
Or is this Only if on same network...which is not useful for me
Thanks bác nhiều nha em đã làm đc rùi ^^. Mà ở chỗ add thêm port em thấy nó cảnh báo là dễ bị hack thì có làm sao kh nhỉ bác.
it could turn on if the computer ever turned on. if i had not unplaged the power then it could not turn on?
i stopped in very beginning step, there is no power management in my ethernet configuration
i try in regedit, but nothing
please help me
In Realtek pci control prop
There is no *power management* option only 4 options are there. Plz help to resolve it.
Install driver for it
i dont think i can activate it on BIOS since i cannot get to the advanced settings, my pc: HP Laptop 16-e0xxx
LOL. So one problem is that the dynamic IP update client is shown here, fatally, to be installed on the computer that would probably be powered off when the IP address is changed by the ISP. So if that happens, sending a magic packet on port 9 to the computer will go to an out of date IP address! Fail. 2 workarounds:- keep the computer on permamently which rubishes this procdure, or better to see if the router has a dynamic IP address client embedded in the firmware accesed through the web page.
It's a hack so it can get access to personal info. That is the goal of this poster.
network & local lan network remote, monitering how. please any one lan moniter ing software, with video🎥
does it turn the pc on if its off or jus wake it if suspend/hibernating?
depends on the motherboard and bios settings
As mentioned in comments if PC is sleeping or hibernating it can not run the update ip client 🙈
my pc boots up if I shut it down and impudently start it but if it's more the 30 mins it doesn't work pls help
can it be that i have allow the computer to turn off this device to save power network adapter
Did you find the solution? I’m having this problem as well
I too have this problem.. wake on lan (also wan) works fine but after like 10 or so minutes it stops working..
😘😘😘😘😘
I have an Republic of Gamers Asus Gaming Laptop but it doesn't have any setup whatsoever for setting the power! So, with that missing there's no way of waking up your PC.
For me it only works if I wake it up from the same WIFI. If I try to turn it on through 5G or another WIFI connection it does not work. That is weird
If you could VPN into your network do that. Send the magic packet to the specific IP of your computer and not a broadcast. Set a static IP and binded MAC in your router like in the video 😊
@@joeyc4492 Thank you, I will try to do that! Hopefully it works!
Thx for the ip address
what about Linux ???
i will try
Only work with ethernet is it
It worked better with the port 7 for me
What if you want to wake a pc from your android phone?
You can use Teamviewer
@@BTH82 I use that to remote control but to just power a simple Wake on LAN app works just fine
200 steps to do this
In Linux 2 steps
remote desktop with only 3 letter password.
I bet he's had ransomware if he kept the weak password.