How to Remove & Replace a Watch Crown
ฝัง
- เผยแพร่เมื่อ 29 ส.ค. 2024
- Buy crowns here: www.esslinger.c...
Learn more about changing watch crowns: blog.esslinger....
Learn watch repair: blog.esslinger....
Buy the tools seen in this video here: www.esslinger.c...
Buy watch bands here: www.esslinger.c...
Subscribe to our channel and get updates on new videos here: www.youtube.com... - แนวปฏิบัติและการใช้ชีวิต
How can I chose the right crown to my watch . and where to buy the crown and tool from .if the stem is too long how did you get it the right length . it did not show in the video . thank you for the video.
Changing only the crown - when the stem is exposed but still sitting in the watch, why does one have to take the stem out completely? Can't you unscrew the old crown and then screw on the new one? Great video, btw - than you!
Thanks for this.. The inside glass was all dull.. Now it's spotless after being shown how to get the pin and crown out.. Awesome..
Thanks for the vid, very useful. Slightly unrelated question, but still involving watch crowns: can you damage a watch crown by pulling it too hard? Can it break quite easily?
@@Neil.C57510 hope it got fixed okay!
Nothing about cutting the stem to length. You'll be very lucky to get a replacement stem that is the correct length.
Your video was very informing but I have a Ciga Design hollow mechanical and still cant work out how to remove the broken stem. Thanks
Terry
What is the potential issue if the crown tube is coming off the case with the crown still threaded to it?
A very clear and helpful info on watch repair
Can I replace my back case with transperant or skeleton back case.plz make video on this
I removed the crown from my watch to clean it, but after I placed the crown back as it was it didn't work.
Hi, i have a blancpain villeret 40mm watch in stainless steel 2 years old (2020) watch and i noticed that it is stiff when i try to wind it. It has 72 hours power reserve.
Example: When i wind it, it is tight..
I have to pull out the crown then i have to push it back in, in order for it to be buttery smooth when i wind it. It keeps excellent time BUT it is just stiff/tight if i wind it without pulling out the crown and pushing it back in first.. feels like resistance..
Any idea on what could it be? I dont have warranty.
My jlc reverso is so smooth , i dont have to pull out crown and push back in for it to be smooth wind.
Which type of silicone/oil for the crown gasket do you recommend?
Nice video thank you for taking your time to made the video
does anyone know how to remove the stem from a hamilton ventura mid 90s? I will be unscrewing the back later and need to polish if i can the inside crystal... is it just removing the stem that will allow me to get the dial popped out?
I will call tissot to check as watch is brand new under full warranty. I think this was my fault as i have pulled it to hard to click 3 times like it said in manual but it should be 2 times. I think manual is bit confusing. Screw has fitted back properly and secure and not coming out even if pulled hard so it should be fine. My only concern was water resistance. Thank you for replying
Danijal Besic Is there an oring on that crown assembly???? Im not to familiar with that movement...that is an Omeg movement right??
Agar watch ke piche ka jo part hota h aur wo gum jaye to hum use kaise sudhar skte h
Do you know any place where I can buy a crown and stem for Seiko SYMK25K1? Any suggestion? Thanks!!!!!
Thanks for this video. It helps me alot.
I have a broken crown axis, can it be fixed? Thanks
Hi, i have a fossil nate watch. Crown came out easily yesterday. Is that normal or broken?
I have a Tissot PRS 200 Chronograph. The crown has become detached. There is a hole on the inside to insert a pin to pull out the stem, but I'm not sure how to pull out the stem without the crown attached to it! Any advice?
Yes. Don't be a hero. Take it to a watch professional.
Hi! Good day! I ask my father to pass his Rolex submariner to me about 6 months ago. And now the crown isn't attached anymore, I'm afraid to tell him because I promise that I will take care of it. How much will it cost me if I repair it to the professionals? I'm asking because I'm just a student and I'm concern about over pricing. Pls help! Thank you!
Akeem Azis About $1000
@@Zestypanda Sure hope you got that fixed friend?
Can loctite be used instead of the epoxy?
yes and recommended
I followed this instruction and two seconds later I ordered a new stem.
Thanks!
Friend, you kknow how to repair automatic watches?
by Bulova stem broke it got caught on a lip while I was working and the entire stem got ripped out I was wondering if that can be fixed at all.
Michael Homer yes
If the stem really broken, you're screwed. These things can't be repaired. You'll need to purchase a replacement stem. Or have a watchmaker obtain one, sinthan you do at dinding the proper stem.ce he' has more experience
"Turn the pin vice in one direction and the crown in the opposite direction" Definitely only true 50% of the time to remove.
Jack T my watch hands won't move anymore when I pull the crown out to set it the hands won't move at all anymore i took the crown out several times to see what's wrong and put it back it and try twisting it to set the time but it's not working how to I fix this
Even with the battery it won't work
@@dawonfields9071 Heat it
@@igorcabrera8123 Exactly.. But how to do it? I mean everyone has a lighter but not all have a heat gun.. 🤔
the second hand has came off in my m. korrs watch, do you know how to get into it.
Cherie Beattie toss it in the trash and buy a sekio or citizen watch ;)
thank you
I want to change my watch face to my other watch just buy takin out the face out and switch it to my other watch to see how it would look
Why cant you use red lock tight..??? or blue even...nice video by the way...
The chemical composition is all wrong. You need epoxy specifically made for watch repairs.
@@TheCometHunter Where can I buy some epoxy ?
@@ventsislavdimitrov4110 not from a Jedi.
This jumps over a lot of the not so easy parts i think and also is not totally correct at some points
How so?
@@jimwatchyyc How do you open/close the watch? as far as i understand you normally use lockthight not epoxy? is it the same for water tight watches? like examepels of how the screw looks? how to get the length of the stem right? How do you line it up? he just states that you will need to line it up not how. How do you change the length of the stem? do you file it down?
It’s so much easier then this video...
Super