Quick Look and Simple Setup of the TP-Link Omada 10-Port POE Switch with the Hardware Controller
ฝัง
- เผยแพร่เมื่อ 5 ส.ค. 2024
- In this video we very briefly look at the TP-Link Omada 10-Port POE Switch (SG2210P) and setup a VLAN within the Omada Hardware Controller (OC200). This is a simple setup for home use. We will do a more advance setup at a later date!
Get yours here!
amzn.to/3fW2Y6E
Support the channel
www.amazon.com/shop/spxlabs
spxlabs.com/links
spxlabs.com/shop
ts.la/stefano66335
Visit
spxlabs.com
Chat
/ spxlabs
/ discord
Chapters
Introduction 0:00
SG2210P Intro 0:10
Software Features 0:39
Hardware Setup 1:30
Finding the IP Addresses 2:12
Setting Up the Hardware Controller 2:53
Create Admin Account 3:40
Adopting the Devices 4:37
Create a VLAN 5:44
Create a Profile 6:41
Confine VLAN to specific Ports 7:51
Verify Changes 8:54
Verify Throttling 9:57
Speed Test through Switch 10:34
Conclusion 11:05
#omada #homelab #networking
@TPLINKTECH @tpsupport @TPLinkdoBrasil - วิทยาศาสตร์และเทคโนโลยี
excellently explained.
Great video. Clear on how to configure the network
Ma men your here too. 😅
I'm gonna be in your channel again later.
Great video! Liked and subscribed
Awesome! A life of misery and pain is ahead of you now that you subscribed.
@@SPXLabs and hopefully more learning 😁
😬 lol don’t get your hopes up
Excelente conteúdo, abraço e muito obrigado.
Great video. My TL-SG1016PE switch is showing as client not device, any idea how to change it?
Good morning sir here i like to help me about vouchers using oc200 and deskswitck my customers can using same vouchers to connecting about time a expired? Cause i saw a seller from shop complaining about oc200 not working very well 🤔
is it really necessary a router between the controller and switch?
in R605 can combined the 4 ISP?
Man that controller UI... looking pretty familiar...
“Hey can I copy your homework?”
Sure just change it a little bit so the teacher doesn’t know.
If I didn't drink so much UniFi kool-Aid I may be convinced to switch to the TP-Link system. Let's see how they do over the next year or so and maybe I will!
TP LINK ER605 is better than TL-ER5120 ?? i can not find TL-ER5120 anywhere for buying. thanks. er605 can make load-balance ? i can use this router for almost 120 users ?
Q: Can I use 150 mitter this device connect PC
Great video.. Do you need the router or could you just use the oc200 and a switch?
You don’t need the router.
@@SPXLabs TPlink router sucks, get the ER-X instead.
Great video!
Hello Sir, I am facing problem to open Omada controller software. When I open Omada controller it launches web browser and downloads .jar file every time. I reinstall the software but the problem is still not resolved. so can you help me what should i do
Wow um that’s strange. Have you already tried going back to factory settings
Can this exact set up be done with other things connected to the switch ? or having only the necessary things connected while setting it up like you do here ?
What do you mean by other things? you can connect whatever you want to the switch to obtain network connectivity. I can't really give you an answer because what you are asking is too vague. Sorry.
Is there some list of which tp-link switch work with omada controller? I'd link to know with TL-sg1008P is manageable by oc200
I believe on TP-Links website.
For 08:10 you clicked edit on a single port. Couldn’t you click edit selected for group editing? Good video. I have ubiquiti now, but I don’t like their decisions with routing and cloud required for all DM and Cloudkey.
Yes I suppose
my omada controller cannot adopt a sg2428p switch. I was able to adopt WAP but switch could not be detected….same subnet/network and i can ping from the switch. I can ping the controller. Any idea?
Try factory resetting the switch? Aside from that no idea. I didn’t run into any adoption issues :/
Could you do a video on how to set up IOT plus the rules required to keep out my hacking neighbour Pls
My controller is seeing the router, but not the switch, although the switch has an IP, I can ping the switch and access the GUI. How do solve it?
Maybe factor reset the switch?
@@SPXLabs I figured it out. The TL-SG1016 is NOT an SDN compatible switch. I'm returning it for another switch.
Well that explains it. Very interesting thanks for letting me know!
Hi, I just got the same short stack set up. I tried to copy your KidsVlan settings however mine is in port 8 and I connected my google mesh router there, but i could still access the omada controller from google mesh. Am I missing something?
I think this video is a bit old and needs to be updated. Many things have changed, so it’s hard for me to tell you exactly
@@SPXLabs thx, i just ditched the google mesh and bought eap110 and enabled guest network :) can you make an updated video for this?
Maybe. Can’t promise anything right now
I dig those little patch cables, where did you get them?
Lol Ubiquitis online store
They are called EZ-Kinks I made a jokes
Dali tumubo buhok ah hahaha
Odd question, I have two VPN routers and the OC200. How do I setup a site to site VPN setup with both? Do you think I need 2 OC200's and one on each side? I'm a programmer, lol, and trying to figure all of this low level networking. Thanks for sharing!
Can’t tell you how because I only have one. You don’t need the controller, you need two routers to setup site to site. One controller should be able to manage both, I think.
@@SPXLabs if I roughly figure it out I’ll respond here. You might be able to build a video based on it. I basically have your stack here in this video and another VPN router. Even the tplink docs don’t give step by step. I’ll figure it out. Might have to see if they have a forum for help. Thank you sir
@@midwestoffgrid9190 Okay sounds good. Best of luck in the meanwhile!
@@midwestoffgrid9190 plsss reply again if you managed to solve it man i want to know to
Is this sdn controller?
Did you manage to setup IPSec failover with the latest firmware on OC200?
I haven't given that a try.
@@SPXLabs Ohkay, Thanks.
lol....looks just like my Unifi stuff.... ;) well if they are alot cheaper than the unifi i might change!
1:43 what is the name of the white wire?
Ubiquiti UniFi Ethernet Patch Cable, 1m, Cat6, White
Is "T1500G-10PS (TL-SG2210P)" same as this?
Based off a super quick glance from my Google search, they are different, but only barely.
@@SPXLabs oh okay thanks,
Wasn't expecting that fast reply 😳 😂
The differences are, it’s end of life. Otherwise they look identical to me
What did you mean by missing things like the firewall?...I thought the router here was the firewall?
Like a dedicated hardware firewall. The router does have a firewall
@@SPXLabs wow...thought it did, can you provide the link to the firewall? been looking at a solution to put at my parents house.
Um I think I may have misspoke. Because there isn’t a hardware firewall. Oops
hi, my setup is oc200, er605 and eap110, i dont have a switch hub, and the problem is my output speed is only 25mbps.. may isp speed is 300mbps how can fix this? thanks a lot
Is this over WiFi?
@@SPXLabs yes sir
That’s probably the issue. If you move closer to your wireless access point does it get better?
@@SPXLabs its the same.. i dont know what's the problem with setup. I did not change anything, .
@@BerdonBasa Hmmm. What happens if you directly plug into your router and do a speed test? Have you done a speed test from your OC200 controller?
Can the router support 100 cilent, tks
I’m not 100% sure what tks is
@@SPXLabs it mean can the Router tl-er605 can hold up to 100 cilent with 128mb ram or not
@@chaukiuu4527 get a stronger router like er-x
can I use my own router with oc200?
You can use any equipment you chose to operate. Just do no expect the OC200 to work with anything outside of the Omada line.
Thanks...here is what I am buying..OC200, 10 port omada sdn switch, 3 access points omada SDN....so am I ok to manage a network? THe only thing not using tp link omada sdn is my router
I think the problem you will face is that the Omada router is what handles the VLANs, VPN stuff, and all the other bells and whistles. If you only get the switch I think that you will only be able to do static routes.
@@SPXLabs Okay last question if I do wanna use the ER 605 currently I have a built-in router modem I guess I use the first port of my built in router modem to a lan on the ee605? I can figure out the rest
Conteúdo muito interessante, muito obrigado por compartilhar
Obrigado por dedicar seu tempo para comentar!
Hy i have tplink ER604 VPN router
And I can't access whatsapp call
Can you help to configure my router and unblocked whatsapp call proxy?
I’m sorry I don’t know anything about that.
Hi, Do i have to get a omada Hardware Controller ?
Nope
you can dl the software ver
How to contact you
TP-Link ap use must need controller
That’s not true. You can use the AP in standalone mode but some features will not work or will be missing.
Can this setup be configured with a MacBook Pro instead of a PC? All installation guides a for PC
I normally don’t play this card but I’m going to this time. Did you even watch?
@@SPXLabs yes I did watch but I'm network "pro" like you, I'm your everyday guy looking to add a little more security and slight flexibility to my home without having to manage it. So when you use an MS-DOS like window through your Mac to do your Simple setup most ppl don't know how to go about it that way. So your term of "simple" is not so simple for everyone, plus your using a Mac mini, and I asked about a MacBook pro. Maybe I should have been more clear with asking can you set it up an easier way without a controller using a MacBook laptop without downloading the exe file for Windows or Linux
I did everything on a Mac, setting it up, recording the screen, and even filmed on iPhone. I think the easiest way would be to buy the OC200 controller so you can avoid command line stuff. Mac mini and a MacBook Pro use the same Operating System, the hardest part for you there would be using Ethernet to connect to the controller. If you do not buy the controller than you will need to host the controller software on windows or Linux, that’s not something I’d do because I like having the dedicated controller.
My switch is not being detected why ? O have the tp link sg1024de please help. Everything else is the same as your set up
What do you mean by not being detected? Detected by what? Omada, DHCP, port negotiation, need more info??
@@SPXLabs i followed the instructions from your video,ON the ER605 DHCP CLIENT LIST I can see the switch, the PC and the OC300. When I go to the Omaha controller web under devices the switch is not on the list.
The SG1024de isn't Omada compatible so it won't show up in the Omada Device list but it should show up in the same place as the PC and other connected devices list. If it doesn't then.... I'm not sure what to tell you to do. If it is providing networking connectivity then I guess ultimately it doesn't matter but if it is not working, sorry. I wish I could help.
@@SPXLabs bro u just helped me. I just ordered the one u have in this video. That should work. My switch does work. Question, When I get my new switch tomorrow and plug it in, is it going to show in the list or am I going to need to reset everything and start over ?
You just need to adopt the new switch. You do not need to reset anything.
What are the prices?
It varies from region to region
Beware of TP-Link products. If the product fails within the warranty period you will be required to pay for shipping the defective item to them before they will send a replacement.
Ubiquiti does the same I think
@@SPXLabs ubiquiti products, if you have defective item and it's out of warranty they no longer repair the item. it's just like, disposable item.
@@SPXLabs I can confirm. I had a Unifi doorbell that died within warranty but I had to pay for shipping back to them. Sometimes vendors offer the ability to buy a replacement and then get refunded once they receive the broken product as well if you want the replacement faster.
Figured as much. Thanks for pitching in!
Yeah $8 is such a pain to get a replacement
hi
Hello sir
Hi
اشطه عليك
In my case, not having kids is far more easier... 😋😄
I don't like this switch. Just 61w total power from 8 ports. Uplink itself wastes a port. (SFP is currently costly for home users).
Yeah pretty overkill stuff. GLinet flint 2 is where it’s at.
I just bought the non-Omada managed switch TP-Link TL-SG108PE for 53$. It's a ripoff that the same switch with Omada firmware is over 100$.
Dang that’s awesome! Makes sense that it would be cheaper, got to pay for the development costs of Omada.
kids plug in to port 1-4, sneaky bas****!
TRYING TO COPY UBIQUITY PRODUCTS
Seems overcomplicated. It would be useful if you only used the one switch but not when you have mulltiple switches throughout. Sponsored.
So you need a cloid controller
No
@@SPXLabs i just bought the 8 port version SG2008P i cannot add it in the app? Im assuming you will need a cloud controller to add it into onada?
@asianking187 there are 3 products. The Omada hardware controller, the software controller, and the cloud controller. You do not NEED the cloud controller. You can uses these devices in standalone. If you want the Omada application, then yes, you must choose one of the 3 types.
@@SPXLabs thanks for the help so i have got a gigabit poe switch sg2008p which says i can scan and add it in the omada app? So ill be able
To do that on that alone?
@@SPXLabs do you use the omada app on the phone?