How to build a flexible LED Curtain display WS2812b | T1000S Controller Soft Display
ฝัง
- เผยแพร่เมื่อ 21 มี.ค. 2012
- 👉JOIN GIVEAWAY 2023 LIMITED TIME - • Best Summer Toys 2023 ...
👉 Support us - / elektric_junkys
👉 Orders/Customization - elektric-junkys.com
👉 3D Wallpaper - • Hong Kong Wallpaper | ...
🛠 Material List.:
👉 how to build an LED Display 2020 bit.ly/2iKOA68
👉 Used Tools.: Soldering Station - amzn.to/2Y79LOU
👉 LED Screen Fixation Poles - amzn.to/2YnJDU2
👉 PVC Template - amzn.to/2StQdTP
👉 Heatgun - amzn.to/32GQxTR
👉 elektric-junkys.com,
👉How to make an LED Display • how to LED floor tilin...
👉LIKE US ON FACEBOOK.: / ejunky1
#ledscreen #leddisplay #ledstriplights #ws2812b
👉ALUMINUM TRACKS & LED - bit.ly/2hwhTt1
👉Tile Cutter Pricey - amzn.to/2StStdL
👉NEW PROJECT - • Hong Kong Wallpaper | ...
How to build your own LED Display by LED Strips, LED Controllable Strips, Flexible Adressable LED Strips, Controlled by Madrix, LED SD Card Controller,HDMI Video Processors connect your DIY LED Display directly to DVD Players or Other Devices, How to Build a LED Screen, LED Display Screen, WS2801, WS2811, LPD8806,LPD8809
LPD6803,D705,1101,6909, 6912, TM1803,TM1804,TM1809,TM1812, TM1904TM1909TM1912,UCS6909UCS6912UCS7009UCS5903, UCS3903, DMX512, WS2801,WS2803, DS189, TLS3001,TLS3002TLS3008, P9813, BS0901,BS0902, Store files: *.led, Flexible LED Display, Foldable LED Display, Indoor LED Display, Outoor LED Display, Portable LED Screen, Interactive Dancefloors, T1000S Controller, LED Growlight Strips and more - วิทยาศาสตร์และเทคโนโลยี
CHECKOUT OUR NEWEST VIDEO -- LED Floortiling DIY th-cam.com/video/-l09hAqXgKo/w-d-xo.html
Would the software support adding stips in between the existing ones but shifting them sidewards by half a pixel? This would double the pixel density while avoiding it looking like there are vertical columns of gaps.
A picture is worth a thousand words........... but a hundred words could of summed up this 12 minute video just as well. lol.
i take it back. that is a rather lovely looking final product, good sir.
I have a question about building my own LED panel. When using multiple power supplies does the data line run constant from the beginning of the led strips to the end? While the power lines are dedicated to however much current a specific power supply can handle?
Save 6 minutes of your LIFE and skip from the 3 minute mark to the 9 minute mark! Do it NOW!
If he was a painter he'd make us watch paint dry :)
If he returned from vacation, he'd make us watch every slide.
The title says, "How to build ..." not "How to look at ...".
Some of us want to build this thing not just watch a light show.
Nomoreidsleft;) thanks dude.... just wait guys for the next Project how to build a LED Tube Display then i will even Show how to tie up shoes....
hey guys the new DIY Project is online check it out how to build a LED Display Part 2 LED rigid Bars 1000X2000mm foldable
I'm Curious If I can use a LED Curtain like this with other lighting programs like Chauvet ShowXpress or at least trigger the patterns with other programs. Does This curtain have DMX Inputs when its finished?
im trying to make a t-shirt that says letters no scrolling nothing fancy. any help?
which programme do you using for programming?
Very cool. Thank you for posting this!
Wow!!! Perfect for concerts and all other kinds of occasion. But you'll gonna need a lot of LED's for concerts.
very interesting whatching somebody working for minutes with a wooden yardstick, rearranging stuff over and over again instead of making one drawing geforehead and using a permanent) marker to transfer that, so that the actual glue process could be done straight away. And off course a great lesson for those never seen a hot air gun working.
Really good
can you make them sound reactive with colour changes?
Nice video. Thank You. You might appreciate a "Chalk Line" tool. Draw a straight line every time and never make a permanent mark on your background material..
end result looks quite good
this looks hella sick i have a pull down curtain like that in my room for my windows nice
ATTENTION ATTENTION GUYS THE PRICE IS MUCH LOWER NOW !!!!!!! CHECKOUT THE XXL PROJECT OF WS2811 th-cam.com/video/e-rdgB_19Fg/w-d-xo.html
ejunky66 "Do/Will you sell these video curtains complete? Could I have you make it?
how much... I would have to buy all the supplies, of course....
Is anyone going to mention to these technical GENIUSES... that "YOU'RE" has an " ' " in it... Not only that.. but YOURE.. grammatically means ": YOU ARE " think they were going for the word " YOUR "....
Great concept... great job by some creative minds... not sure what dis was wat dey wanded to saaaay... guess dat is dat... or somfin jus like dat...
Exclusive - Technology more than 130 comments are about this yes, so "youre" a little late ...
Did not scroll through the comments to see if anyone remarked about it... but... that was an excellent use of the word " you're " although you clearly never got how it works when you were in class learning English.
Not picking on you, not beating you up... this link will give you a chance to recall what you saw and forgot...
www.youryoure.com/
No big deal... it's just grammar... There are generations of kids growing up half ways educated not because they did not listen to what they were taught in school.. but because their parents did not know the difference at home... My dad called it constructive criticism. Your interest and effort in hands on technology development is ASTOUNDING...
Thanks for keeping us in the know...
What software did you use to program the strip lights and can you make a circular grid instead of a square or rectangular one?
Hello I need some sugestion,how I can have real time clock and temp on same display like this.I using T1000s controller.thanks
www.elektric-junkys.com send us an email
Great design !
Is inspiration for me...
what a sweet project.. bravo!
ejunky66, what soft you use, its looks amazing, really?
I notice that the LED brightness drops from one side to the other. You need to put more power connections at ends and middle of strip to prevent voltage drop. if voltage drops from 3.7V at one end to 2.7V at other (not uncommon for that length) the LED at the 3.7V end will let more power than at 2.7V end. You can add more power at the 2.7V end and prevent "voltage sag" and make the display much better.
best led iv seen
need to stop this random youtube search streak
How could someone dislike this? :) Nice project.
would have set up a scheme to connect your source and the LED on the controller? type know qa amount of LED and power at the source, and the number of LEDs per controller channel
OMG. awesome, congratulations
عمل في غاية الروعة
LED Infinity Mirror XXL th-cam.com/video/0UQ3-BjeHq4/w-d-xo.html
hi :) is it possible to programm scenes with your software (mac compatible?) and convert them to midi, so i could use a footswitch to change scenes and use the tap function to control how fast it will be played before starting a scene?
can you explain in more detail on how to wire (interconnect) all the cut strips from the start to end of the run?
Love how the kid jacks your phone at 9:22 lol
I find it funny that he corrected his grammar using incorrect grammar!
" all this cool thing ", great video thank you for sharing.
Hi, how do you break the strip into individual pixels? In other words, I don't see matrix wires; how do you send a signal to light up some LEDs and not the adjacent ones? Is this built into the strip from the factory? I ask because all I have seen so far are strips where all the LEDs light up at once.
best led ever
ok so i have LED strips, and a T1000 controller, how do i go about making the connections. only the 12v line is indicated, have no idea which lines the Clk or data signals run on or which one is ground. alltogether there are 4 connection points.
gostei muito desse video como e nome desse programa que comada a fita de led
Awesome build!
the LED strip he is using has the positive and negative leads, but also has a data and timer lead, allowing control over an individual led. they come at a cost though, as in they are a bit more expensive than the ordinary LED strip.
wow! ..... yeah i'm gonna have to do this one day.
Great stuff!
Flickering chain sequential on/off lighting has been done to death in conventional Christmas lights. They are very fatiguing & usually provide only a brief period of novelty.
There is a need to switch off a portion of the total to allow dimming but that's it.
Simplify the controller & reduce cost.
Can you list the hardware that you used on This project that would allow me to build my own similar panel,Mainly that of which you used for programming and controlling the output of the LEDs cheers
gostaria de receber ocurso completo traduzido em portugues brasil como fazer?
cool video and project! thanks for sharing your knowledge :)!..random question: what is the distance between each led?
AWSOME DESIGN !
I can put several together if it is to be greater, the controlled with DMX?
can u tell me how to aquire all items needed id like to make my own?
Hi what model led are you using here please?? not found any with clock and data on yet?
Can you make a circle with them? And what did you use to program the SD card
masters of world
Would be cool to use for live set ups if it had MIDI support or connect via 1/4" input
hello, you guys have this complete kit for mounting the sale? to deliver in Brazil, the leaves?
Good explanation word writing in the screen👍
thanks for comment my Friend
thanks ;)! but these LED strips are expensive because has a microcontroller per led.So do you know other way to index leds in a led strip ?for example make my own addressable led strip from a simpler(no-addressable)
Great - if you can control the soft WS2812? What software are you using? Is it for download on the web?
I think the air intake for the heat gun is on the back of the gun. Blocked off when you set it down like you did.
Also how large could I make a screen like this with out needing another power supply or LED controller
can you make it bigger? and can the software take photos and convert them so that they can be shown on the led display?
and it will save you having to re-solder/ sodder when you have moved it about a bit (its a very good idea to cover all soldered wire connections with heatshrink the solder isn't as flexible as the wire so it ends up under stress creating premature dry joints
for less than a buck a yard its worthwile :D
Sorry, i missed the figures at the beginning. The interface you used to program, does that come included ?
Really useful and cool i made it :)
What software are you using to program the SD card for the T1000s, it doesn't look like LEDedit?
shop.elektric-junkys.com
u take your time,i see lol n do gud work keep it up ma mans
what program do you use to program the led lights ...please help
hey man could you give me a website i could be the LED strips from I'm having a hard time finding them
Just curious, can you program it to be a "Music Visualizer" ?
By the way, very nice project! You did a good job!
my subwoofer got to do alot of work with this video ^^
Can this be used to create a music visualization? do you have any videos of it in that application?
how can I buy a complete set of this one andhow much all
shop.elektric-junkys.com send a inquire with your size and get the quote within 1 day ! FOR A COMPLETE KIT
Do you think i might get some detailed instructions on how to do this? I want to make my whole room glow.
which led editor you are using..?because im using t1000s controller..
we have all Editors available on our Website !
we have all Editors available on our Website !
How can I control LED strips using recular DMX mixer or USB DMX converter (like Enttec Pro)? What kind of products I need?
can we live stream from my laptop to these strips?
we have several new programs to control and create animations text and videos, just visit our shop.elektric-junkys.com
Hi, can you help me find a controler like you use in your project?
Nice work ejunky99. I'm thinking of a similar project but I do not find this tape that can cut 1 by 1. The tape must have IC chip but what do you use? I'll care because here in Brazil each meter costs around $ 30 USD. Thanks
I'm followeding all the directionaries of the for this making this LED curtain and needing the most helps ASAP!
I finished for the all complete and plug into the powerful supplies but I accidentally the whole curtain! Please for the helping!!!
That is really cool!
que programa es el que usas y control ?
this was interesting. I already got ten meters of DeluX SMD 5050 LED RGB (two 5m rolls). But those are not multicolor. do they need to be that? Or is the SD card controller making it all?
how can i avail the the system and the software
hi, simply send us an email check out our new Project th-cam.com/video/fnnVExn7aoU/w-d-xo.html&lc=UgwlFaOTjta97-XLRXN4AaABAg
this is awsome !!!!! i have learned to make led panels but not ass easy as this i will like to know more about programing cause i need more lights to my dj equipment and life stages ;) great job ;)
what's the program name? the one wich you write and you can see your text on leds
Question i want somethings to display like a banner in a subway is this led???
Awesome!!!!! I want to build one
What software do you use to program this kind of matrix of LED strip lights and what lights are these?
are these the LPD8806 led strip lights?
Do you guys have a controller that would hook into RCA and make this a spectrum analyzer?
Pretty cool
In your description it says HDMI, How can I get HDMI output to one of the DIY strip screens??
these led strips are really expensive because you can control each led section, but if you have the money or you are a business it is certainly worth it!
can software be run on mac osx?
where u get the wires for connecting each cut strip?
Hi I want to build one also what is the name of the program you are using and do you have link where to buy the LED strips
How do you control the LEDs individually when the strips only have common wires? Would love to see wifi g diagram. Great post and DIY vid!!
which program q uses for the creation of scenes
th-cam.com/video/sPt9olLB_o4/w-d-xo.html
is there a special chip that has to be on the stripe? How is each LED controlled? Very interesting video!