Question 1: The purpose of anti-reflux is to set the maximum export power to utility grid? Question 2: Is there any option that inverter will throw any excess power to utility grid without any set-up value?
Hello, you're correct. By default, the inverter will export excess power to the grid. The export limitation function is to set the maximum export power to the grid. If you have further product inquiries, please feel free to contact our sales team at info@ginverter.com. Thank you!
Does this Inverter Growwatt TLx model require DC DB Box protection system ? I understand from this Inverter datasheet that it has built-in DC surge protection ?
Hello, though it's strongly recommended that users install monitoring device in order to make operation and maintenance easier, the inverter can work as usual without the monitoring device. Thanks!
Hello, if you need any technical support, please contact our service team at service@ginverter.com, or you can call our service hotline at +86 755 2747 1942. Thank you!
If I got a meter, does the ShinePhone app show me how much I’ve exported to the grid? I want to work out if it’s worth me getting batteries and what size
Hello, for technical support, please feel free to contact our service team at service@ginverter.com. More contact info can be founded on our website here: www.ginverter.com/support/contact. Thank you!
Hi, I have a SPF 3000 and 4 of 200 Amp batteries. I bought the system under the pretence that it will work as a battery backup at night and still have the mains power connected. However the Unit does not work as I expected as the 25mm2 cables are too big for the unit and the current limitation is a factor. I would like to use the Inverter connected to the distribution board and then connect the smart meter in to prevent the batteries being depleted at night. Can I use this to limit the export to the Grid and then not use the Battery to supply the Grid.
How do you do export limit control with 2x inverters in parallel. I got told you had to do half on each inverter and use 2x smart meters? is the growatt setup that dumb?
Hello, for technical support, please contact our service team at service@ginverter.com, or you can call our service hotline at +86 755 2747 1942. Thank you!
Do you have 2 inverters paralleled with grid tie setup? I am experimenting with my new set up. we should share lessons learned since its hard to get support from growatt.
Set it to 0. Test it by setting the setting to 0 and monitor your energy flow while turning on a microwave for example. The solar should be the first source as the inverter keeps its ac voltage slightly over the grid voltage. If not enough energy, youll start to import energy from the grid but because you have a zero export policy youll never export what you produce. This is good if you have batteries plus for some reason cant export energy to the grid :]
Hello, for technical support, please feel free to contact our service team at service@ginverter.com. More contact info can be founded on our website here: www.ginverter.com/support/contact. Thank you!
Hi, I have a Growatt 5500MTL-S grid tied and I need to monitor the watt production from the panels, the house consumption and the grid injection amount on real time, it’s posible? In that case how can I do it ? Thank you!
Hello, it's recommended that you reach out to your saler to purchase the CT. If you need further assistance in purchasing, please feel free to contact our sales team at info@ginverter.com. Thank you!
@@truongngocphu841 Hello, please feel free to contact our service team in Vietnam: +84 0345345311 ; Chris.vu@growatt.com. Our engineer can explain to you. Thank you!
Hello, for product inquiries, please feel free to contact our sales team at info@ginverter.com. Our sales rep can provide assistance for you. Thank you!
Hello, for technical support, please contact our service team at service@ginverter.com, or you can call our service hotline at +86 755 2747 1942. Thank you!
Hello, for technical support, please contact our service team at service@ginverter.com, or you can call our service hotline at +86 755 2747 1942. Thank you!
We don't want a smart meter we want a CT camp we can use with a dumb meter for export control. If you include them in the box you'd have far more sales in UK/EU.
For product info or business collaboration, please contact our sales team at info@ginverter.com/ +86 755 2747 1900. You can also visit our website for more information (www.ginverter.com). Thank you!
Hello, the MIN inverter series support export limitation. For further product inquiries, please feel free to contact our sales team at info@ginverter.com. Thank you!
How to connect 3 pcs. MIN 6KW with a ShineMaster and ONE SDM120CT (export limitation). Consider that 3 MIN 6K, supply 18KW Peak under 100% production capacity.
Hello, for products and solutions in the US, please feel free to contact our sales team at usa@ginverter.com, or you can visit our US website for more info at www.growatt-america.com/list-8.html. Thank you!
@@Growatt @Growatt New Energy The website is horrible. Nobody in any department answers the phone every extension goes to a send us a email voicemail. Ended up contacting signature solar which is highly recommended by many and was told that the min6000tl-x Is to be turned on with dc power with ac grid disconnected Setup the advanced settings to 240v split phase and wire L1 to 120 L2 labled N on the plug to 120 and the pv or ground terminal labeled on the plug to ground.. Hope this helps someone else So yes this inverter can do 240v usa 60 hz split phase L1 120 L2 120 G GROUND
Hello, MIN 6000 is on-grid inverter, and it doesn't work off-grid or hybrid. If you're look for a hybrid inverter, you can find more about MIN 2500-6000TL-XH here: www.ginverter.com/upload/file/contents/2020/06/5ed49c2c41569.pdf
For further information of the product, please feel free to contact our sales team at info@ginverter.com. Our sales representative can provide further assistance. Thank you!
@@Growatt Hello Sir, Could you please tell me what's the different between 6000TL-X and 6000TL-XH ? I live in Vietnam. I'm using version MIN 6000TL-X for Vietnam market
Hello, that's optional. It depends on your needs and the package that the authorized distributor offers. If you need further information, please feel free to contact our sales team at info@ginverter.com. Thank you!
Growatt New Energy i am trying to do so but your people are not helpful!!! They cannot provide straight answers on questions and refer to manuals that are totally contradictory
how to limit export on this inverter model : growatt 5000 TL-X with meter 230 rs 485 communication . or a type of CT . please have a specific video tutorial thanks a lot
Thank you for your suggestion. You can check out our export limitation solutions at our website: www.ginverter.com/Export-Limitation-Solution.html. For further technical support, please feel free to contact our service team at service@ginverter.com. Thank you!
Hello, for product inquiries and support, please feel free to contact our sales team at info@ginverter.com. Our sales rep can provide assistance for you. Thank you!
@Chen Max i hope that this coming hybrid can operate with out the battery connected and have export function,spf3000,spf5000 can't operate with out battery connected.
@马列子孙之中华铁骑 Is there a dynamic limiting. Lats say I use 2kw it will go down to 2 kw, but in the next hour I need only 1kw can it auto lower down to 1kw without me changing any settings.
@@Growatt i was in touch with service@ginverter but instead of telling me how to do they just say what i have done is wrong. Thye cannot tell me what is wrong?! The guy who has done this video definitely can give me a help to connect 3 of teh 6000TL-X in a parallel connection with 3 SPM230
@@michaelroessler4571 Hello, we can't have 3 pcs MIN 6000TL-X with SPM 230 in parallel. As this is very technical, we strongly recommend that you discuss with our service team. Thank you for your understanding.
@@Growatt your service team is not responding to any request. A inverter support person told me it can be connected but he doesn’t know the wiring. You have lots of contradicting information in manuals and advise from your people. Seams they do not know how your products actually work as soon as it is a bit out of your standard. So who can contact me and give some advise. A skilled person with deep knowledge.
Can all Mini Growatts use a CT sensor instead of a SMART meter...I am trying to do things in my shed. 30 meters on its own ring main...Would that ring main give a Total house reading. Really consumers do not want to pay for expensive elecrrical engineers they want a Product they just plug in the wall and it does everything automatically....All in 1 product no electrician must be the obvious product GOAL. Thanks...
@@supercenter3517 Thank you so much for your answer! I have been hunting high and low for the password and now know it is "growatt" followed by the current date!
This was a good demo of all the required devices.
Can you show a video how to connect CT with this inverter and app settings too
Question 1: The purpose of anti-reflux is to set the maximum export power to utility grid?
Question 2: Is there any option that inverter will throw any excess power to utility grid without any set-up value?
Hello, you're correct. By default, the inverter will export excess power to the grid. The export limitation function is to set the maximum export power to the grid. If you have further product inquiries, please feel free to contact our sales team at info@ginverter.com. Thank you!
Does this Inverter Growwatt TLx model require DC DB Box protection system ? I understand from this Inverter datasheet that it has built-in DC surge protection ?
MIN 2500-6000TL-X DC integrates Type II SPD, therefore DC DB box protection is not required.
How do you set 5kW limit export with 2 single phase 5kW inverter ? On a single phase grid?
Hello, for technical support, please feel free to contact our service team at service@ginverter.com. Thank you!
Is it possible to export nothing (0 watts) to the grid & use 4000w for consumables?
Hello, please feel free to contact our service team at service@ginverter.com for assistance on export limitation. Thank you!
Do you need the monitor to be plugged in, in order for the inverter to work. Or can I use the inverter without having to plug in the monitor?
Hello, though it's strongly recommended that users install monitoring device in order to make operation and maintenance easier, the inverter can work as usual without the monitoring device. Thanks!
@@Growatt Thank you!
Shouldn't the comms cable for the smart meter be connected to pins 5+ and 6- ?
Hello, if you need any technical support, please contact our service team at service@ginverter.com, or you can call our service hotline at +86 755 2747 1942. Thank you!
Yes, can confirm for MIN 3600 TL-XH.
If I got a meter, does the ShinePhone app show me how much I’ve exported to the grid? I want to work out if it’s worth me getting batteries and what size
Hello, for technical support, please feel free to contact our service team at service@ginverter.com. More contact info can be founded on our website here: www.ginverter.com/support/contact. Thank you!
Hi, I have a SPF 3000 and 4 of 200 Amp batteries. I bought the system under the pretence that it will work as a battery backup at night and still have the mains power connected. However the Unit does not work as I expected as the 25mm2 cables are too big for the unit and the current limitation is a factor. I would like to use the Inverter connected to the distribution board and then connect the smart meter in to prevent the batteries being depleted at night. Can I use this to limit the export to the Grid and then not use the Battery to supply the Grid.
Hello, for technical support, please feel free to contact our service team at service@ginverter.com. Thank you!
Can the Apollo kc2000 electric jack and battery be used to supply power during a power outage? With CT
Hello, for technical support and customer service, please feel free to contact our service team at service@ginverter.com. Thank you!
How do you do export limit control with 2x inverters in parallel. I got told you had to do half on each inverter and use 2x smart meters? is the growatt setup that dumb?
Hello, for technical support, please contact our service team at service@ginverter.com, or you can call our service hotline at +86 755 2747 1942. Thank you!
Do you have 2 inverters paralleled with grid tie setup? I am experimenting with my new set up. we should share lessons learned since its hard to get support from growatt.
If i want to export zero to grid using CT, how much value should i type ?
Set it to 0. Test it by setting the setting to 0 and monitor your energy flow while turning on a microwave for example. The solar should be the first source as the inverter keeps its ac voltage slightly over the grid voltage. If not enough energy, youll start to import energy from the grid but because you have a zero export policy youll never export what you produce. This is good if you have batteries plus for some reason cant export energy to the grid :]
Thanks for sharing with us!👌👍
Also my shine link does not have a white box the comments to the router ?
Need to show connections better. Where is the CT sensor clamps on the house mains to sense bi-directional AC power flow?
Hello, for technical support, please feel free to contact our service team at service@ginverter.com. More contact info can be founded on our website here: www.ginverter.com/support/contact. Thank you!
Hi, I have a Growatt 5500MTL-S grid tied and I need to monitor the watt production from the panels, the house consumption and the grid injection amount on real time, it’s posible? In that case how can I do it ? Thank you!
Hello, please feel free to contact our service team at service@ginverter.com for assistance on monitoring. Thank you!
current transformer CT which one is suitable for min tl-x 6000 ? Thank
Hello, it's recommended that you reach out to your saler to purchase the CT. If you need further assistance in purchasing, please feel free to contact our sales team at info@ginverter.com. Thank you!
@@Growatt Please let me the link with parameter of CT ?
@@truongngocphu841 Hello, please feel free to contact our service team in Vietnam: +84 0345345311
; Chris.vu@growatt.com. Our engineer can explain to you. Thank you!
What are the options to send the meter data to the inverter, if the direct cable is not an options? Thanks in advanced.
Hello, for product inquiries, please feel free to contact our sales team at info@ginverter.com. Our sales rep can provide assistance for you. Thank you!
Hi. Will this on grid inverter work without a dongle and the meter connected ?
Hello, for technical support, please contact our service team at service@ginverter.com, or you can call our service hotline at +86 755 2747 1942. Thank you!
hey how is the setup with 2 3phase growatts?
can it be solved with one shinelink an one energy meter ?
Hello, for technical support, please feel free to contact our service team at service@ginverter.com. Thank you for your understanding!
Hi. Is it possible to see Anti-reflux setting in Shinephone app when there is no Growatt Webbox device in the system ?
Hello, for technical support and customer service, please feel free to contact our service team at service@ginverter.com. Thank you!
I have growatt 2500 TL-XE is possible to set zero export on this device
Hello, for technical support, please contact our service team at service@ginverter.com, or you can call our service hotline at +86 755 2747 1942. Thank you!
We don't want a smart meter we want a CT camp we can use with a dumb meter for export control. If you include them in the box you'd have far more sales in UK/EU.
Is it Possible to limit/zero export on old Growatt 2000S (without RS 485 interface model) ?
Hello, for service and technical support, please feel free to contact our service team at service@ginverter.com. Thank you!
trying to find out how many panel i need for this system
Excuse me, Inveter 6000MTL is connected to the Internet via optical cable for remote monitoring,
is it possible to reset the amount of created energy ? I want to reset the counter to zero
Hello
Growatt 3000 tl-x.
Is it possible to connect a battery?
For product info or business collaboration, please contact our sales team at info@ginverter.com/ +86 755 2747 1900. You can also visit our website for more information (www.ginverter.com). Thank you!
Hello I have the inverter MIN5000TL-X, the datasheet say Max PV Input Power is 7000W. Is 7000W for each MPPT or 3500W for each MPPT?
Hello, for product and technical inquiries, please feel free to contact our sales team at info@ginverter.com. Thank you!
Good day where can I get this meter for my MIC-3000TL-X?
Does it have a limiter function??
Hello, the MIN inverter series support export limitation. For further product inquiries, please feel free to contact our sales team at info@ginverter.com. Thank you!
How to connect 3 pcs. MIN 6KW with a ShineMaster and ONE SDM120CT (export limitation). Consider that 3 MIN 6K, supply 18KW Peak under 100% production capacity.
Hello, for technical support, please feel free to contact our service team at service@ginverter.com. Thank you for your understanding!
can you wire this inverter to 240v split phase usa
120v 60hz L1
120v 60hz L2
Hello, for products and solutions in the US, please feel free to contact our sales team at usa@ginverter.com, or you can visit our US website for more info at www.growatt-america.com/list-8.html. Thank you!
@@Growatt @Growatt New Energy The website is horrible. Nobody in any department answers the phone every extension goes to a send us a email voicemail. Ended up contacting signature solar which is highly recommended by many and was told that the min6000tl-x
Is to be turned on with dc power with ac grid disconnected
Setup the advanced settings to 240v split phase and wire L1 to 120 L2 labled N on the plug to 120 and the pv or ground terminal labeled on the plug to ground..
Hope this helps someone else
So yes this inverter can do
240v usa 60 hz split phase
L1 120
L2 120
G GROUND
@@mrplay6294 Hello, our US team can be reached at (818) 800-9455 (Sales)/(866) 686-0298 (Service). Thank you!
Hello. Could you please guide me how to setup for MIN6000 run off-grid hybrid with CT current sensor?
Hello, MIN 6000 is on-grid inverter, and it doesn't work off-grid or hybrid. If you're look for a hybrid inverter, you can find more about MIN 2500-6000TL-XH here: www.ginverter.com/upload/file/contents/2020/06/5ed49c2c41569.pdf
For further information of the product, please feel free to contact our sales team at info@ginverter.com. Our sales representative can provide further assistance. Thank you!
@@Growatt I'm using MIN6000TL-X. Is it possible ?
@@truongngocphu841 Sorry, but it's not possible with MIN 6000TL-X. We have the XH series for that purpose.
@@Growatt Hello Sir, Could you please tell me what's the different between 6000TL-X and 6000TL-XH ? I live in Vietnam. I'm using version MIN 6000TL-X for Vietnam market
Is that on-grid inverter or off-grid inverter?
Hello, it's on-grid inverter.
The inverter came with WiFi usb ?
Hello, that's optional. It depends on your needs and the package that the authorized distributor offers. If you need further information, please feel free to contact our sales team at info@ginverter.com. Thank you!
why does the meter come with an Ethernet cable?
Hello, for technical support, please feel free to contact our service team at service@ginverter.com. Thank you!
My Growth 5000 TL X inverted is set to PV 3720(W) capacity, why is this?
Hello, for service and technical support, please feel free to contact our service team at service@ginverter.com. Thank you!
How to change the wifi SSID of a wifi dongle. Make it connect to another Wifi?
Hello, for service and technical support, please feel free to contact our service team at service@ginverter.com. Thank you!
Growatt New Energy i am trying to do so but your people are not helpful!!! They cannot provide straight answers on questions and refer to manuals that are totally contradictory
Maybe you can let me know who is a real product specialist in your company
@@michaelroessler4571 Hello, for your information, wifi SSID can not be changed.
Growatt New Energy so i need to reinstall the wifi data logger, correct?
how to limit export on this inverter model : growatt 5000 TL-X with meter 230 rs 485 communication . or a type of CT . please have a specific video tutorial thanks a lot
Thank you for your suggestion. You can check out our export limitation solutions at our website: www.ginverter.com/Export-Limitation-Solution.html. For further technical support, please feel free to contact our service team at service@ginverter.com. Thank you!
How can I buy meter to Vietnam thanks
Hello, for business collaboration, please feel free to contact our sales team at info@ginverter.com. Thank you!
Hi where buy growart mini I want buy
Hello, for product inquiries and support, please feel free to contact our sales team at info@ginverter.com. Our sales rep can provide assistance for you. Thank you!
can you make a video about CT stream no i am looking forward to thanks
Hello, your suggestion is well received. Thank you very much!
A ghê thiệt mò qua tới bên này lun
Where is the battery connection port? It's blank
This is a hybrid?
@Chen Max i hope that this coming hybrid can operate with out the battery connected and have export function,spf3000,spf5000 can't operate with out battery connected.
@Chen Max thank you for the info
@马列子孙之中华铁骑 Is there a dynamic limiting. Lats say I use 2kw it will go down to 2 kw, but in the next hour I need only 1kw can it auto lower down to 1kw without me changing any settings.
How to install 3 pcs 6000Tl-X with SPM 230 parallel
Hello, for service and technical support, please feel free to contact our service team at service@ginverter.com. Thank you!
@@Growatt i was in touch with service@ginverter but instead of telling me how to do they just say what i have done is wrong. Thye cannot tell me what is wrong?! The guy who has done this video definitely can give me a help to connect 3 of teh 6000TL-X in a parallel connection with 3 SPM230
Any idea of how to get it done?
@@michaelroessler4571 Hello, we can't have 3 pcs MIN 6000TL-X with SPM 230 in parallel. As this is very technical, we strongly recommend that you discuss with our service team. Thank you for your understanding.
@@Growatt your service team is not responding to any request. A inverter support person told me it can be connected but he doesn’t know the wiring. You have lots of contradicting information in manuals and advise from your people. Seams they do not know how your products actually work as soon as it is a bit out of your standard. So who can contact me and give some advise. A skilled person with deep knowledge.
Can all Mini Growatts use a CT sensor instead of a SMART meter...I am trying to do things in my shed. 30 meters on its own ring main...Would that ring main give a Total house reading. Really consumers do not want to pay for expensive elecrrical engineers they want a Product they just plug in the wall and it does everything automatically....All in 1 product no electrician must be the obvious product GOAL. Thanks...
Hello, for technical support, please contact our service team at service@ginverter.com. Thank you!
Hello,
Can you please tell me the password for an SPH6000 inverter. I try sph+date but it doesn't work
Hello, for customer service and technical support, please feel free to contact our service team at service@ginverter.com. Thank you!
@@Growatt I send the email more then a week ago and still got no answer. Do you know when I'll have the password
@@newtab2 try growatt+date, for example growatt20210331
@@supercenter3517 Thank you so much for your answer! I have been hunting high and low for the password and now know it is "growatt" followed by the current date!
@@supercenter3517 Yes, thank you! @growatt new energy support sucks!
Лайк