I've had major issues with polling rate stability with this mouse and intermittent input lag. Using it on a fresh, stripped windows install, optimized heavily for performance. There is a major emi issue in my house due to some powerfactor problems from my utility transformer so it's safe to assume emi mitigation on the circuitry and firmware is not good on the Beastx. It's worth noting that the best mouse by far for stability, and low input lag, emi mitigation has been the xm2we. That's a well designed mouse.
XM2we has CX firmware, so it doesn't really have anything special in there in regards of emi mitigation, the latency is fine, but not the best! I had no interference issues with either of these, but the amount of interference in my environment is very limited!
Have lost multiple mechanical switch mice to double clicking, so can’t get the BeastX Mini. The BeastX has battery issues due to poor firmware. The company ain’t bothered about developing better software so it won’t get better. Shame because the looks and build are amazing.
funnily enough, double clicking is an issue that happens more to higher rated switches than the beastx mini have. though regardless of that - you can replace them fairly easily on the beastx mini
Talking about the OP1We, is there anything in production for the OP1 8K? There's some hype around it, and I would love to see your take! :) Besides, great video as always, I higly appreciate the effort and conciseness of your content :)
I have the BeastX in purple and I love the look, feel, and performance but it is a bit small for me for longer sessions. I prefer the AX Wireless for my daily.
Have you tested motion syns on/off on this mouses? im curios because beastx mini and medium is actually two different mouses with different software/firmware. So on the mini there very noticable sensor delay with motion sync on. And there an review of the lamzu atlantis mini 4k on rtings: "We tested this mouse at 4000Hz with Motion Sync turned on. Normally, we would perform our sensor latency test with Motion Sync turned off, as it can add up to 1 ms of latency. However, this mouse has significantly increased latency at 4000Hz with Motion Sync turned off, with the delay to start of movement being 22.6ms, the delay at half movement being 11.8ms, and the delay to end of movement being 12.9ms." And im wonder if beastx have something simmilar.
tengo ambos y estoy mas enamorado de la version mini me acomode mas con el pero no hay nada mas que me guste que tu canal y tus analisis tan precisos como siempre
Love the in depth review of the actually mice compared to what others have done, but what makes me most curious is the Beast x size dimensions ve superlight 2, i seen the charts you made with latency etc, so as an overall size comparison between those two, which is thinnest and longest, and about the rear on both, if you are able to answer i really appreciate it 😊, and Great video 🫡 you kinda look like F0rest, sure your not related 🤣🤔🫡
I have mixed feelings about the Beast X medium. Battery life is dismal at 2 and 4k, and had major issues with sensor performance. Did all the troubleshooting info and reached out to WL mouse support but did not receive a response. I love the f-mouse / beast x shape but I almost felt it was too light. After a month of use, I had a clear decrease in accuracy of 5-7% across the board. I really wanted to love the Beast x but it just couldn't match it with my other mains. Bit too expensive in my country as well, imho.
Additionally, the clicks took a bit to get used to. They seem to have really short travel. The side buttons developed an annoying amount of wobble in them after about two weeks, and the dots' skates are super low quality. The included glass skates are pretty decent on cloth pads, though.
I notice no difference in battery life for most other 2K and 4K mice. Not sure what problems you had with sensor performance, could be your system not dealing well with higher polling rates, or your unit is scuffed somehow. The likelihood of these Chinese companies having good support is very low though, I feel the pain :/
Hey Haus, I have not noticed any system issues with other mice I use at 2 and 4k (Pulsar, Fantech and Logitech ) and the OP1 8k performs flawlessly at 8k. It's just the Beast x having inconsistencies in tracking and so forth. I really wanted to love it though and gave it a good amount of time on the pad. Yes, probably a bad copy. The OP18k is a very smooth and stable mouse in comparison.
hi haus! have been waiting for this vid for so long
Hope you find valuable information in the video!
any plans on reviewing the newly released sora v2? im curious to see if theyve fixed the click latency problems from the first gen@@hausgaming
@@hausgaming what drip said
I love my beastx mini. Was very sceptical at first but had 0 problems. I figertip and the mini is my favorite mouse as of now.
what siize hands do you have?
19x10@@rammanjames
So it took you a while to adjust to it? What was your mains before?
Awesome video, thank you! Looking forward to OP1 8K & Sora V2
Finsweed here and logterm subscriber you are the number one person i trust for pc gaming.
Solid review. Really enjoying both of them with fingertip.
Cool review, I like the mouse! I'm a claw guy though so now it's OP1 for me.
I've had major issues with polling rate stability with this mouse and intermittent input lag. Using it on a fresh, stripped windows install, optimized heavily for performance. There is a major emi issue in my house due to some powerfactor problems from my utility transformer so it's safe to assume emi mitigation on the circuitry and firmware is not good on the Beastx. It's worth noting that the best mouse by far for stability, and low input lag, emi mitigation has been the xm2we. That's a well designed mouse.
XM2we has CX firmware, so it doesn't really have anything special in there in regards of emi mitigation, the latency is fine, but not the best! I had no interference issues with either of these, but the amount of interference in my environment is very limited!
@@hausgamingI was regarding their PCB design more so than firmware related emi mitigation.
@@DJHarmonicsIt's a CX solution as well, so it really doesn't have anything special in regards to that!
how about now?
I'm thinking of buying x max
but is there any laggy issue?
Have lost multiple mechanical switch mice to double clicking, so can’t get the BeastX Mini. The BeastX has battery issues due to poor firmware. The company ain’t bothered about developing better software so it won’t get better.
Shame because the looks and build are amazing.
funnily enough, double clicking is an issue that happens more to higher rated switches than the beastx mini have.
though regardless of that - you can replace them fairly easily on the beastx mini
Beastx mini is only glossy if you have the black one
Talking about the OP1We, is there anything in production for the OP1 8K? There's some hype around it, and I would love to see your take! :)
Besides, great video as always, I higly appreciate the effort and conciseness of your content :)
I appreciate the positive feedback brother! OP1 8K testing will start next week!
@@hausgaming Thanks Haus! Looking foward for that one then :)
Now that one is going to be interesting... Thanks for doing these @@hausgaming
Lamzu Atlantis Pro review coming?
Apparently the latency is worse on the normal size if you have the screen side of the receiver facing forward instead of up.
My favourite and main mouse at the moment. Not normally the shape I would buy but I'm glad I did. Top tier mouse
I have pretty small hands 17.5x9cm. And i feel like i would like the shape so i might pick up a mini
Definitely go with the mini if you get one, I got larger hands and went with Regular and regret it.
i have both and i love them especially beast mini .i saw in the video u have the new lamzu keyboard ...do u will do a review?
Ooo yes, please do
@@Sum1Better we hope :)
Banger notification to get on a Friday after work!
How clever to add beer opener
the new freefall logo looks fire on the pad
I have the BeastX in purple and I love the look, feel, and performance but it is a bit small for me for longer sessions. I prefer the AX Wireless for my daily.
we need a performace test on the op1 wired 8k, brother
I have the Beast X and it is the best mouse I have ever had, but the battery is a big problem.
Is that a haus pad ? O.o
eagle eyes
Lekker haus!
Thanks for this content ❤
Been waiting for this.
Have you tested motion syns on/off on this mouses? im curios because beastx mini and medium is actually two different mouses with different software/firmware.
So on the mini there very noticable sensor delay with motion sync on.
And there an review of the lamzu atlantis mini 4k on rtings:
"We tested this mouse at 4000Hz with Motion Sync turned on. Normally, we would perform our sensor latency test with Motion Sync turned off, as it can add up to 1 ms of latency. However, this mouse has significantly increased latency at 4000Hz with Motion Sync turned off, with the delay to start of movement being 22.6ms, the delay at half movement being 11.8ms, and the delay to end of movement being 12.9ms."
And im wonder if beastx have something simmilar.
i have small hands, 17.78 by 7.7 cm. do you think i could relax claw grip the Mini?
what the fuck happened in the intro
bro was lickin his lips for a delicious meal.
tengo ambos y estoy mas enamorado de la version mini me acomode mas con el pero no hay nada mas que me guste que tu canal y tus analisis tan precisos como siempre
En cuantos días te llego
op1 8k >
Hey Haus, Waizowl Cloud review coming soon?
I kind of want to get the BeastX Mini just for the super cute dongle.
What's the best mouse for claw grip 18x9 hand size? I've been using x2 mini for a while and I don't really like it.
try the viper v3 pro if you can afford it
Are you going to review the 8K firmware of the beast x mini? Thanks!
WLBeast X has wireless issue ?? Cause I heard something like that
Is.. is that a bottle opener in the back?!?!?!
Bottle opener & 4K dongles come together these days
Have you tested it with the high speed mode?
How long will the mini version last with 4k usage?
BeastX Mini or SoraV2?
Love the in depth review of the actually mice compared to what others have done, but what makes me most curious is the Beast x size dimensions ve superlight 2, i seen the charts you made with latency etc, so as an overall size comparison between those two, which is thinnest and longest, and about the rear on both, if you are able to answer i really appreciate it 😊, and Great video 🫡 you kinda look like F0rest, sure your not related 🤣🤔🫡
Did you try testing latency with High-speed Mode for 1k polling ?
Yes, there is no effect for click latency!
The dabalaba laba mouse?
"dot feet by no mean are my favourite feet" . Does anyone know what kind of feet is Haus favourite?
Greek feet
Didnt know the Zowie U2 has 4ms+ Click latency. That looks bad..
what about the software?
@haus im running into double click issues with the Beast X did you find anything similiar?
No problems in terms of double clicks for me 🤔
what took you so long 🥲
Hauspad?👀👀
"battery time is average" uhm what is "average"? xd
Best reviews ❤❤❤
Really appreciate it brother!
My beast X mini sensor hitches past 2000dpi. Also my scroll wheel doesn't read 20 percent of the time above 2000 dpi.
I have mixed feelings about the Beast X medium. Battery life is dismal at 2 and 4k, and had major issues with sensor performance. Did all the troubleshooting info and reached out to WL mouse support but did not receive a response. I love the f-mouse / beast x shape but I almost felt it was too light. After a month of use, I had a clear decrease in accuracy of 5-7% across the board. I really wanted to love the Beast x but it just couldn't match it with my other mains. Bit too expensive in my country as well, imho.
Additionally, the clicks took a bit to get used to. They seem to have really short travel. The side buttons developed an annoying amount of wobble in them after about two weeks, and the dots' skates are super low quality. The included glass skates are pretty decent on cloth pads, though.
I notice no difference in battery life for most other 2K and 4K mice. Not sure what problems you had with sensor performance, could be your system not dealing well with higher polling rates, or your unit is scuffed somehow. The likelihood of these Chinese companies having good support is very low though, I feel the pain :/
Hey Haus,
I have not noticed any system issues with other mice I use at 2 and 4k (Pulsar, Fantech and Logitech ) and the OP1 8k performs flawlessly at 8k. It's just the Beast x having inconsistencies in tracking and so forth. I really wanted to love it though and gave it a good amount of time on the pad. Yes, probably a bad copy.
The OP18k is a very smooth and stable mouse in comparison.
dude looks and sounds exactly like f0rest
Showing Motion latency Charts in an wlmouse Video - wlmouse not on the Chart
yeah the c*m coated mice
Is it just me or the official WLMouse website is infested with viruses??
Def just you lol
Just close the webcam girl tabs bro
Just you