Very Old Military Hand Crank Generator

แชร์
ฝัง
  • เผยแพร่เมื่อ 26 มิ.ย. 2024
  • Guys check out this super cool old military generator, it produces around 5Amps at 24Volts.
    I found out that it was made in Slovenia, probably a long time ago, not sure about the year but i think at least 30 years..
    It was used in a shelter probably for some lights...
    Please enjoy the video and let me know if there is anything you would like me to do with it..
  • แนวปฏิบัติและการใช้ชีวิต

ความคิดเห็น • 94

  • @Cashpots
    @Cashpots 5 ปีที่แล้ว +17

    This was made to use with a transmitter receiver unit - just enough energy to contact base. That is why the voltage stops just above 24V so that the radio is not fried! For lighting it would be an oil lamp I'm afraid and nobody could keep the generator running for more than a few minutes. They were often used by units in the jungle where a gasoline generator would have been too noisy.

  • @fededevi1985
    @fededevi1985 4 ปีที่แล้ว +6

    It becomes easier to crank because you have a non linear, constant power load attached to it. Your step down circuit works linearly up to 12V or whatever you set the dc-dc converter then it flattens out the power. This means that as you increase the rotation speed above what generates 12V, the amperage, and consequently the torque required to keep the unit running decrease linearly. Which can be clearly seen by the fact that at full output power it draws "only" 3 amps while at 12 volts or so it draws 5 amps which is what those bulbs are rated at. (P = ωτ)
    Very beautiful object anyway.

  • @valiungur517
    @valiungur517 4 ปีที่แล้ว +4

    This is new ...it is from 80 years and are made in Yugoslavia
    It is for army radio RUP 20
    Power normaly is 25-30w no mor from hand in long term use.
    Also is another one for 12v
    I also have a lot of model of som kind of thing form 1944 to 1990 model
    The best is from PRC 320 radio small and nice.
    Use it like it is !
    Good luck!

  • @kenanucanbarlic4573
    @kenanucanbarlic4573 ปีที่แล้ว +1

    One of the purposes of that mobile generator was to power mobile comunication stations at the field... and yeah you should keep it cause it's made to last forever and it's very good quality ...

  • @dosomething7930
    @dosomething7930 4 ปีที่แล้ว +2

    This is a quality unit , no one could make such quality a unit in 2020.

  • @jimdennett46
    @jimdennett46 4 ปีที่แล้ว +8

    The feed back circuit is to excite the armature. That means it doesn't have permanent magnets as an armature. It's a car alternator rectified to DC with the armature being self excited instead of excited externally by a battery. Once u fill up the capacitors it powers the armature and turns it into a high powered electromagnetic. Advantage over permanent magnets is it's more powerful and 1/10 the weight. It's a hand cranked car alternator. It's in great condition 👍

    • @DIYGarageProjects
      @DIYGarageProjects  4 ปีที่แล้ว +2

      Great description, thanks for watching

    • @mountain177
      @mountain177 4 ปีที่แล้ว

      I was going to say, it looks like its regulated to 24.6/24.5 volts. That's why it got easier for him to turn it once the voltage came up. That would be a neat generator to connect to a water wheel

    • @johnnaglic
      @johnnaglic ปีที่แล้ว +1

      If it does not have permanent magnets to create flux, then it mush have external battery energy to create a flux in order to get the whole thing going. Even alternators need external DC to get the field going before the stator can generate energy. So in order to fill up the capacitors, it must have some tiny magnets on the armature to get the excitation circuit to do it's job.

    • @lelandthomosoniii4743
      @lelandthomosoniii4743 ปีที่แล้ว

      Great info!

  • @loloybaloloy4402
    @loloybaloloy4402 5 ปีที่แล้ว +5

    Thanks for sharing this. I've seen them on war movies and it looks cool. Good for emergency.

  • @ericharris1853
    @ericharris1853 3 ปีที่แล้ว +1

    Dame your lucky to have a dad that gives you power

  • @H2OnlineShopBD
    @H2OnlineShopBD 4 ปีที่แล้ว +1

    i see this generator first time ... so thanks for sharing

  • @NewHampshireJack
    @NewHampshireJack ปีที่แล้ว +1

    Great presentation. Your English is excellent. I heard an accent but perfectly understandable but this old American.

  • @daveb7999
    @daveb7999 ปีที่แล้ว

    Very interesting, quality piece of equipment. Looks brand new inside. Great video, and your English is perfect, thank you for sharing this with us.

  • @aaronchapman4216
    @aaronchapman4216 6 ปีที่แล้ว +2

    Very interesting, thanks for sharing bro.

  • @richardbest3079
    @richardbest3079 6 ปีที่แล้ว +5

    That's really cool. If you don't restore it to original at least clear coat it to keep it in original condition.

  • @harishsharma5096
    @harishsharma5096 5 ปีที่แล้ว +1

    Indeed a very nice information video thanks

  • @ZacharyRodriguezVlogs
    @ZacharyRodriguezVlogs 6 ปีที่แล้ว +15

    Your English is very good.

  • @matteopisanello7787
    @matteopisanello7787 3 ปีที่แล้ว

    Nice piece of history

  • @RockerMtl1
    @RockerMtl1 2 ปีที่แล้ว

    Very nice ! I too am 4 years late ! I would keep it original, historical piece

  • @petemack3076
    @petemack3076 ปีที่แล้ว

    You can be sure it was built after 1958, since that year saw the first power transistor. So early 60s at earliest.

  • @stevev3664
    @stevev3664 2 ปีที่แล้ว

    Your English is very good. Thanks for the video. Very interesting.

  • @turbo3089
    @turbo3089 5 ปีที่แล้ว +4

    Excellent video and your English is excellent as well I would not have even noticed that you didn't know English until you told us.

  • @Edmorbus
    @Edmorbus 5 ปีที่แล้ว +1

    Excellent video

  • @johnnaglic
    @johnnaglic ปีที่แล้ว

    Nicely made unit in it's day. Gearbox sounds a bit loud but operable. This is why I made my own generator that would serve as an experiment for LOW RPM, such as 1 to 1.5 turns per second, 60 to 90 RPM with NO Gears or pulleys, Silent. My findings with hand crank devices are basically used for low power applications because the torque required to go more than a watt or so will become a task that you really don't want to do for sustained time frame. The end result is that it is an energy converting device that you don't want to sweat over too much when it comes to doing the physical work. You can see it in operation on my channel powering up an array of 900 LED's. I was able to generate around 8 to 10 or so watts, but it was work. Leg power can be better than using wrist for more energy.

  • @tanhockjun
    @tanhockjun 6 ปีที่แล้ว

    Wow! The inside looks new...

  • @rjds1800
    @rjds1800 10 หลายเดือนก่อน

    These where meant to charge the battery banks so the load would be minimal at the time of cranking. You would use at a steady pace about 1 crank a second for 30 minutes every few hours to recharge the batteries

  • @dumbassdriversofdenver9113
    @dumbassdriversofdenver9113 3 ปีที่แล้ว +1

    Your English is better than some people I know and I am in an English speaking country.

    • @DIYGarageProjects
      @DIYGarageProjects  3 ปีที่แล้ว +1

      Thanks you, means alot, boost in confidence also :)

  • @san-loe
    @san-loe 2 ปีที่แล้ว +1

    ur English is on point bro! I know I'm 4 years late tho heh

  • @gianfrancopurpura8112
    @gianfrancopurpura8112 ปีที่แล้ว

    it would be more interesting if it were applied to a gravitation system: a clock that by letting a weight go down, for 10 minutes, recharges the battery. Anyway congratulations.

  • @charlesholt2662
    @charlesholt2662 5 ปีที่แล้ว

    I would think they would have made it so it would run much quieter than it does so enemy’s wouldn’t hear it. It could probably be heard a mile away, it’s very loud. Really cool I would like to find one.

  • @bryngerard4334
    @bryngerard4334 2 ปีที่แล้ว

    I used hand cranks when I was in the British Military. This looks like a NATO specced piece of kit (24V was standard across NATO), the connector looks very familiar. We always used them to charge NiCad batteries for a HF radio. It was impossible to transmit using just the hand crank but you could receive.

  • @coondogtheman
    @coondogtheman 4 ปีที่แล้ว

    Make a giant portable power bank using super capacitors. I saw another video where a guy made a boost box and was able to jump start a car and run a circular saw.
    Your english is very good.

    • @diymicha4905
      @diymicha4905 4 ปีที่แล้ว

      wich doesn't work. At least not for long. This thing makes barely 70W for a few seconds, a saw needs 2000W to run. So this will be a short fun.

  • @alec4672
    @alec4672 5 ปีที่แล้ว +1

    This was actually probably for radio communications, radio was a crucial part of WWII and you need power for radio no way around it. 24 volts could charge up a flat vehicle battery too, lights was probably just a bonus over various types of fuel lighting

    • @bryngerard4334
      @bryngerard4334 2 ปีที่แล้ว

      That was built after WWII and is to NATO specifications. I would say 70's myself.

  • @mr_mack_indenver7807
    @mr_mack_indenver7807 5 ปีที่แล้ว

    Would love to have one of these, or something similar....

  • @TheNinjaMarmot
    @TheNinjaMarmot 6 ปีที่แล้ว +2

    Your English is good enough. Good vid

  • @jimdennett46
    @jimdennett46 4 ปีที่แล้ว +1

    So it's a 120 watt 24vdc battery charger, that's very handy in the bush. Charges 2 car batteries at the same time. 24 vdc makes an excellent dc welder in the bush. Nice find brother. Batteries were usually 6 vdc back then as well.

    • @banny123456
      @banny123456 4 ปีที่แล้ว +1

      First of all, you will need 14.4V to charge the car battery and second, why you need dc welder in the bush :D

    • @farmermope7914
      @farmermope7914 2 ปีที่แล้ว

      @@banny123456 to weld up trees?🙄

  • @immrnoidall
    @immrnoidall 6 ปีที่แล้ว +4

    holy crap , 3-4 amps. that is begging to bolt onto an exercise bike.

  • @joohop
    @joohop 4 ปีที่แล้ว +1

    That Was To Power Short Wave Transceiver
    Your English Is Fine
    Yes I Think It Would Be Good To Re - Paint It
    Bless Up Earthling

  • @stephenwilliams5201
    @stephenwilliams5201 5 ปีที่แล้ว +1

    set up in a recumbent bike set up and enjoy the ride and get strong legs

  • @johngalt7382
    @johngalt7382 9 หลายเดือนก่อน

    Was wondering what kind of engine it had. Seems to run on borscht.

  • @stephenwilliams5201
    @stephenwilliams5201 5 ปีที่แล้ว +2

    one more its called a Gibson girl as per my experience in the army corps of engners

  • @user-xi9ub7bj8t
    @user-xi9ub7bj8t ปีที่แล้ว +1

    Прикольный акцент 😉

  • @dalepoppenhagen8549
    @dalepoppenhagen8549 2 ปีที่แล้ว

    Just cleaned up

  • @shankarmondal3020
    @shankarmondal3020 2 ปีที่แล้ว

    Fine

  • @valveman12
    @valveman12 4 ปีที่แล้ว

    The printed circuit board is fiberglass. They did not have fiberglass circuit boards during the War. If the printed circuit board is original, then this cannot be a WWII Generator. In fact, it is unlikely there would be a circuit board in it and everything would be hardwired. Plus those resistors did not come from that era.

  • @florenlebaron524
    @florenlebaron524 3 ปีที่แล้ว

    How can I purchase one of those?

  • @elmaakuma9735
    @elmaakuma9735 3 ปีที่แล้ว

    Just Asking, is that possible to charging the handphone?

    • @WTGamingHD
      @WTGamingHD 3 ปีที่แล้ว +1

      Yes, you can charge almost anything, you just need a step down regulator to adjust the voltage you need for charging and regulate the charging current :)

  • @chip2567
    @chip2567 6 ปีที่แล้ว

    i want one

  • @saltyseascott
    @saltyseascott 6 ปีที่แล้ว

    that circuitry looks younger than 1960.

    • @ertyuiiknbvcx
      @ertyuiiknbvcx 5 ปีที่แล้ว

      It looks like a circuit board made of fiberglass used in a 70's large company design computer i got from dads work back in the 90's.
      Also the resistors is different and more modern than my old radio from 1950 and 45.
      I got a radio from 1958 too, and the color of this pcb is medium brown and not fiberglass print card board.
      So yes, agree, way more new than the war, at least the war we think about :)
      But perhaps he ment the Vietnam war? I bet it is from 1967 and up.

    • @DIYGarageProjects
      @DIYGarageProjects  5 ปีที่แล้ว +1

      I ment the war my country was in, in 1991 to 1995

    • @jr4062
      @jr4062 3 ปีที่แล้ว

      DIY Garage Projects and reviews just curious if you restored it

  • @singhaakash1994
    @singhaakash1994 5 ปีที่แล้ว

    Where did you get it from ??

    • @Teknopottu
      @Teknopottu 5 ปีที่แล้ว +1

      As he said in the beginning of the video, from his father.

  • @stephenwilliams5201
    @stephenwilliams5201 5 ปีที่แล้ว

    your English is gut

  • @philmonitor9145
    @philmonitor9145 4 ปีที่แล้ว

    What is the OUTPUT voltage is it in AC or DC pro-bably it is AC and so , it would be EASY to trans-formed the VOLTAGE to > HIGHER voltage for VAcuum tube PLATE supply the B.

    • @DIYGarageProjects
      @DIYGarageProjects  4 ปีที่แล้ว

      If you watch the video you can see that it it a dc 24.5v output

    • @philmonitor9145
      @philmonitor9145 4 ปีที่แล้ว

      @@DIYGarageProjects I like your GENERATOR but it is NOT avai-lable here at Philippines. It is GOOD to power RECEIVER during TY-hoon I need that for EMERGENCY pur=poses es=pecially here at Philippines there are a lots of DISASTERs and Calamities ,Thanks for INFO .

  • @vanadiumV
    @vanadiumV 3 ปีที่แล้ว

    is that a Yugoslavia language on the door ?

  • @johndoe-ed9mp
    @johndoe-ed9mp 4 ปีที่แล้ว

    its a time machine 12:30

  • @user-my8wc2fu7u
    @user-my8wc2fu7u 3 ปีที่แล้ว

    Такое ощущение, что твой родной язык русский.

  • @jim-xk2xh
    @jim-xk2xh 4 ปีที่แล้ว

    DO NOT REFUBISH IT, it's worth far more un-painted.

  • @jim-xk2xh
    @jim-xk2xh 4 ปีที่แล้ว

    inside, that's an alternator, NOT A GENERATOR, it's not nearly as old as you think, Jim David, master auto mechanic alternators were invented in 1970 or thereabouts.

    • @banny123456
      @banny123456 4 ปีที่แล้ว

      yeah, this is probably not old than 50y. Electric cable and rubber seal are in relatively good shape. WW2 rubber will no survive until now.

    • @diymicha4905
      @diymicha4905 4 ปีที่แล้ว

      @@banny123456 yeah, I also thought from the beginning this is more like cold war era. So late 70s or 80s.

  • @ericharris1853
    @ericharris1853 3 ปีที่แล้ว +1

    A house needs 30 kilowatts to power it a day

    • @DIYGarageProjects
      @DIYGarageProjects  3 ปีที่แล้ว +2

      Thats is so far from reality, and it doesnt make sense

    • @ericharris1853
      @ericharris1853 3 ปีที่แล้ว +1

      To bad it real man or woman lol

  • @imtiyazmansuri2190
    @imtiyazmansuri2190 4 ปีที่แล้ว

    I have 1944 us army hand generator burke electric.co

  • @igors602
    @igors602 ปีที่แล้ว

    Druze jas imam isti

  • @lelandthomosoniii4743
    @lelandthomosoniii4743 ปีที่แล้ว

    Slovenia?
    That where trump bought his Wife?