Draft Beer Not Pouring?! 5 Reasons Why and How to Fix the Problem?
ฝัง
- เผยแพร่เมื่อ 6 ก.ย. 2024
- LeadersBeverag... & www.qualitydraf...
In today’s short video, Drew will be going through 5 things that could be causing you to have no beer at the faucet. Below is a short recap of those things you can check at your own location before having to call a tech out. Each possible cause below is linked the that spot in the video if you want to jump ahead. This is obviously not an exhaustive list of things that could be wrong. If you have a question or a suggestion for a video please post below. We do our best to read and respond to every comment. We’ll also highlight and link a few of our other videos that may be helpful.
So, you pulled the handle on your beer tower and nothing came out! These are 5 things you can do to troubleshoot this issue.
1. Is the Keg empty? 3:47
This seems very obvious, but we have been on so many service calls over the last decade for empty kegs we are including this. Sometimes, it is trapped by other kegs so even if you do try to lift the keg it seems empty. Get in there and really make sure you have beer. Just be careful of your back!
2. Keg coupler is wrong or not properly engaged: 4:32
You may have heard the coupler referred to as many other things, like a tavern head or a tap. You may have also heard the term Sankey, which is like saying Kleenex for a tissue. What is often called and American Sankey is a D Series coupler. What is often referred to as a European Sankey is an S series coupler. There aren’t many G series keg collars out there anymore (Anchor used to use them) but they were often confused with Key Keg couplers. If you aren’t sure, send us some good photos and we’ll see if we can help. We are very busy so just give us a bit to respond.
Here is our video on How to Tap A Keg and the difference between S & D style couplers. • How to tap a keg and A...
One thing not mentioned in the video. If you have a check ball in the coupler but for some reason there is not check ball retainer, the check ball will block the line. This is super rare but we thought we’d mention it. Here is a video on how to break down and clean a coupler. • How to clean a draft b...
-FOB issue: 6:34
The most common issue with the FOB is that it tripped. When a keg is empty gas goes through the jumper into the FOB (which stands for Foam On Beer) and pushes the float down shutting off the flow of beer. In this case, the issue is your Keg is empty because the FOB did what it was supposed to. However, the problem comes in when the keg is changed but the FOB isn’t reset. If you are a subscriber, you will get a notice when we do a video just on FOBs. It is also possible if you have very thick products or beverages with pulp and sediment that they blocked the mechanism.
-Gas Pressure: 9:21
There are many possible problems with gas. You might be out of gas. If you have a gas blender, even one gas being empty will shut the blender off. Drew only mentions gas cylinders and points out a Nitrogen Generator. However, you may have a bulk gas system that is off or a Nitrogen Generator not working. More possibilities are that a gas switch is off or the actual cylinders aren’t open. As long as we are talking about gas, here is our in depth video about how to search for and find a draft beer system gas leak.
• Video
-Frozen or blocked lines: 13:37
Frozen lines are rare unless something is wrong with your glycol power pack. If the temperature probe is in the wrong spot it could allow your system to get far to cold. The same thing could happen if the control box has a problem. If either of those issues are happening the glycol will be in the low 20’s or lower. Typically, the glycol bath should be around 26-32. Our go to setting for most applications is 29. If there is water in your lines, that temperature could freeze it. You could also have a physical obstruction from sediment in the beverage to plastic ripping out of the lines. Hopefully you never have an obstructed line because there is so much built up mold and bacteria the elixir can’t flow.
If you want to know a little more about the glycol power pack here is a link to a short post on our website about them and what kind of tech you should call. leadersbeverag...
We wish you the best of luck. On of our many goals is to help you solve problems without having to spend your resources on service calls. When you can fix a problem on a Saturday night and get beer flowing again, well, you know that is a good thing. We offer education onsite, at our shop, and via live stream. Hit us up if you’d like to discuss consulting help or education for your team. If you have a quick question, post it below. Interactions help tell TH-cam our video is worth showing other people. We do our best to respond to every post.
Team Work Makes the Dream Work
Be A Leader
Hey bro thanks I'm a night Porter and one of my jobs is to clean lines I will sub and watch your videos as you helped me here!
Howdy Judge! We're really glad this video helped you out, that is the entire idea. The more we can help raise the bar on quality and keep the industry pouring the better we all do. -Cheers & Beers!
@@LeadersBeverageConsulting imagine I had 2 hours before opening ran into a problem searched and your videos came up and solved my issue!! Thank you back for my 2nd night shift in a few hours 😎
Thanks for your video. From Sydney, the land down under!
I have changed the keg, regulator and the coupler. Beer line is not clogged. I'm lost
Thank you !!!! You guys are great!!! 😊
How do I clean draftbeer lines when is connected with two beer lines two keg’s and one beer fountain with out pouring cleaner to one keg?
Hi! Great video as always, I have an issue with a faucet, is doble action, doesn't pouring beer when you open to the front but it does when I push to serve foam, can you help me please thanks 🙏 hope I explained well, English is not my native language
I have a dual kegerator with hard cider on one side and a Porter on the other one. Cider pours fine set CO2 pressure 10 psi and the splitter to both kegs have no way to regulate the tank set at 10 psi. So both kegs get the same psi set at the CO2 tank regulator. The problem I'm having is the Porter keg pours slowly and after a glass just stops? If I shake the Porter tank a bit it starts to pour but again very slowly. I have no leaks in the CO2 system and both CO2 is fully charged and both kegs are recently bought and filled. I checked all washers on both CO2 lines and beer/cider lines. I'm baffled and yes I'm a newbie to having a kegerator. I might note I have the CO2 tank mounted outside of the kegerator to make it easier for me to see the CO2 tank gauges. Suggestions?
Hi I'm just wondering if you would have a recommended brand of nitrogen generator/ gas blender
Hi Josh, we typically use Micro Matic gas blenders with the built in gas leak detectors. They are still made by McDantim so you get that great warranty. For nitrogen generators the Beer Blast seems to work pretty well and check out Fiz Dog nitrogen generators too. -Good Luck, Cheers & Beers!
@@LeadersBeverageConsulting thank you for your reply and thanks for the content you put out 😊