Seriously, sick sick job. I love your iterative process in this. The 9015 is such a beautiful movement to look at as well. Might look at it in my future builds.
Hi, first of all congratulations on your work. I wanted to ask you if it is possible to use an NH35 case for a Miyota 8200 movement obviously using the right movement holder. Thanks😊
Will you be selling these adapters/spacers? I'm sure quite a few people(myself included) would buy a kit and seeing as how you've already done the r&d, seems like a good way to make a bit more off that work
Hey there. Yes, they are for sale. I need to get a form for buying specific sets I've done, but in the meantime you can fill out the custom part form: watchcomplications.com/ten-six-watches/custom-movement-holders/
Super helpful! i am being an absolute mad man and going to try to slap a Bulova p102.10 into a Hiemdallr Titanium seaghost case. Only hickup i forsee if that the dial may not like to play inside the case, i have very nice 28.5mm dial sitting ready if needed. But i really hope i can make it work
It would be great to have a file for the inside of the holder, like say a Miyota 9 series and and have a thick/taller outside that you could whittle to fit thr cavity/adjust the stem and dial height. Really liked your video! ✌️
that’s essentially what i do with redesigns. For example, I had this one made, then redesigned to fit a Panerai style case. It’s usually just adjusting the height and exterior. You can whittle PLA, and sand it, but it’s more accurate to quickly make the adjustments in CAD and reprint.
There are plenty of generic cases on eBay and AliExpress that will fit a 9015. Or you get a custom holder to fit it to a case, like I did in this video.
No, because cases can have different internal dimensions, dial sizes, etc and then their own custom holder to fit a particular movement to that case. It's usually not a one to one swap. A case will usually come with a holder that fits the NHxx to that particular case given its overall and internal dimensions, like stem height. Almost every case and movement combo is unique.
i’ve not used the SKX013 for a project yet, but I don’t think it would take much to modify one of my existing holders. I think the interiors are mostly the same, just diameter difference with 42mm vs 38mm. The cases have the same height.
Like this th-cam.com/video/KZv0_PhdPR0/w-d-xo.html and this th-cam.com/video/lL0Yqkvrfm8/w-d-xo.html and this th-cam.com/video/QjZ2--xdwRg/w-d-xo.html and this th-cam.com/video/PmY498QqJFo/w-d-xo.html
Personally id rather have the Miyota 8 or 9 series movements in my SKX rather than the 7s or NH movements, So I could see this working out for me❤
yeah the 9015 is super popular
Seriously, sick sick job. I love your iterative process in this. The 9015 is such a beautiful movement to look at as well. Might look at it in my future builds.
it’s a nice option. thanks for watching.
Hi, first of all congratulations on your work. I wanted to ask you if it is possible to use an NH35 case for a Miyota 8200 movement obviously using the right movement holder. Thanks😊
Probably, but depends on the specific case in mind.
I just could not shut it off - well done!
glad you liked it. must be crazy like me.
First of all love the GS!
One gutsy move brian! Outstanding!
glad you liked it!
Will you be selling these adapters/spacers?
I'm sure quite a few people(myself included) would buy a kit and seeing as how you've already done the r&d, seems like a good way to make a bit more off that work
Hey there. Yes, they are for sale. I need to get a form for buying specific sets I've done, but in the meantime you can fill out the custom part form: watchcomplications.com/ten-six-watches/custom-movement-holders/
Super helpful! i am being an absolute mad man and going to try to slap a Bulova p102.10 into a Hiemdallr Titanium seaghost case. Only hickup i forsee if that the dial may not like to play inside the case, i have very nice 28.5mm dial sitting ready if needed. But i really hope i can make it work
Have fun bud, glad you got something out of the video :)
It would be great to have a file for the inside of the holder, like say a Miyota 9 series and and have a thick/taller outside that you could whittle to fit thr cavity/adjust the stem and dial height.
Really liked your video! ✌️
that’s essentially what i do with redesigns. For example, I had this one made, then redesigned to fit a Panerai style case. It’s usually just adjusting the height and exterior. You can whittle PLA, and sand it, but it’s more accurate to quickly make the adjustments in CAD and reprint.
Great Video, I have a Miyota 9015 & Can Not Find a Decent Case for it, Need one of your spacers , So I Can go the SKX 007 route ! Thank You!
just sent an email to me at watchcomplications at gmail.
Brilliant work. Your skills are amazing.
I get by haha. Thanks for watching :)
Fantastic job and video presentation!
glad you liked it. hope you stick around
Excellent stuff dude!
thanks!
Could you use the same spacer for the 9075 GMT movement?
being a GMT, the 9075 has more height than the 9015, so the holder and/or spacer would have to be altered to accommodate the difference.
I hv a miyota 9015, but no case. Any suggestion for a case?
There are plenty of generic cases on eBay and AliExpress that will fit a 9015. Or you get a custom holder to fit it to a case, like I did in this video.
Thank you so much for this video!!!
thanks. hope you found it helpful in some way.
I do plenty of supported 3D prints on single extruded Prusa printers and home built printers. Just use prusa slicer and enable supports. Boom.
Excellent job, ❤️❤️❤️
Do you sell this holder? I tried to contact you through your website a few weeks ago but never got a response.
yes I do, sorry I’m behind on life and thus contacts. 😆 I’ll get back to you this week.
let me know if you were one of the responses I got back to, I went through all of them yesterday and today.
@@WatchComplications Yes, thanks. Got it now.
Great Idea!
thanks!
Ray said, " dont cross the Streams"
sacrilege, I know. haha
Does this fit any NH36 case?
No, because cases can have different internal dimensions, dial sizes, etc and then their own custom holder to fit a particular movement to that case. It's usually not a one to one swap. A case will usually come with a holder that fits the NHxx to that particular case given its overall and internal dimensions, like stem height. Almost every case and movement combo is unique.
do you have a spacer for miyota 9015 for SKX013 Case?
i’ve not used the SKX013 for a project yet, but I don’t think it would take much to modify one of my existing holders. I think the interiors are mostly the same, just diameter difference with 42mm vs 38mm. The cases have the same height.
@@WatchComplications thank you very much. where could i order your 9015 spacer?
send me an email watchcomplications at gmail and we can discuss more.
Could you show a watch finished?
Like this th-cam.com/video/KZv0_PhdPR0/w-d-xo.html and this th-cam.com/video/lL0Yqkvrfm8/w-d-xo.html and this th-cam.com/video/QjZ2--xdwRg/w-d-xo.html and this th-cam.com/video/PmY498QqJFo/w-d-xo.html
Has anyone installed a Seiko dial on a Miyota movement? I know the feet locations are different and would like to know if it's possible.
you’d have to remove the dial feet and reset them. I have a vid on that too.
same size the hands?
❣️❣️❣️