Am a bit surprised that they chose to have only one red light output level - it's really bright so one could have use for a lower level. Thanx for the review!
An interesting direction for the new design of flashlights. The issue with the impossibility of replacing the battery is associated not only with the life of the operation. Sometimes it is necessary to quickly replace the battery instead of charging a flashlight. It would be great if information was displayed on the OLED not only about the voltage on the battery, but also about temperature or current time. The plastic lining in style resembles such linings made of artificial leather on binoculars or cameras of the past. A certain element of retrofuturism.
You spoke of the colder temps coming this Fall and Winter...I have a question, a bit off topic. I am not a Flashaholic, and don't know too much about these lights in general, but my question is: Can you leave a led flashlight such as this, outside in your car in the bitter cold of Winter??? Will it still work OK, or will it shorten or kill the battery life? To be specific, I have a Rofis MR70, which is my favorite light of all time! Can I leave it in my car glove box?
I have to be BL50 and I'm always hitting the side button by accident. Both buttons are too easy to push. I'm wondering if the charging port is internally waterproof because the cover sure isn't.
@@RAGEAUTTP_hates_sennejackson It gets very warm on turbo but it will cycle down due to heat for safety as shown in the night shots. Thanks for watching!
I ordered the ms03, but for more than a month I wanted to order bl70. I knew you'd do a detailed review on it. Hopefully they're still in stock now that your review is in...thanks.
@@MAGA_Extremist it's the same way that alot of green lasers are modded etc to get even more and more power, just run into thermal issues tho, ide Imagen it would have a auto shut off like the previous bl50 model if it gets too hot, they have similar sensor module on other torches, they are the best manufacturers for quality torches rn
@Jake3eee yes I love Imalent flashlights they are up there with the best. And I have lasers too 😁. I could understand the power boosting concept I just didn't know if that was good for the LEDs I checked on the Cree website to see how many lumens does xhp 70.2 was. I guess there's always a safety factor of how much power you can put into an LED so if an LED is 12 volts it probably can take 14 something like that. I think this will be my next flashlight .
I got bl60 and it get unholdably hot when you using at max output. İ think its probably hotter. İmalent dont cares temprature just porformance and design. And rubber charging port thing is very unusual. But i like them because brave designs and nice bdys
Well, turbo is not designed to run continuously, so you are do turbo even after it has stepped down over and over, is your fault for it getting too hot. Turbo is for short burst only. Rember the size of these lights as well. Thanks for watching!
Здравствуйте много лет периодически просматриваю ваши ролики о фонарях пейзаж не меняется теже деревья всё тот же забор для меня уже стало родным спасибо за обзоры продолжайте как можно дольше ❤
i'm getting a little tired of these so called flashlights that are only novelty items. who buys these anyways? oled screens, red lights, 58923 different modes that you don't need nor use, leather wraps, fashion cases, premium boxes. the flashlight industry is dissapointing me more and more. you just need a flashlight that has 2 or 3 modes tops and instead of that you get laser beams, 3 strobe modes, rgb lights, that anduril thingy, oled screens, ridiculous prices and so many different lumen outputs... i want a flashlight that is actually a flashlight and can be used as a flashlight
@@CharlesBridgTec but maglites are crazy expensive for what they offer, i understand the usa made thing and all of that, but they are far behind of what nitecore can do at a similar price pont (nitecore just for example)
Am a bit surprised that they chose to have only one red light output level - it's really bright so one could have use for a lower level.
Thanx for the review!
YW! Thanks for watching!
I actually just ordered one of these it'll be here in 3 days. Hopefully it's good quality look forward to getting it
@@lessstuffmorefreedom-livin6886 Let me know your thoughts when you try it out. Thanks for watching!
Awesome I might have to get me one of these!
Thanks for watching!
Another one? Ya got enough flashlights! lol
Another great review my friend. I've been a subscriber for a long time and always look forward to your new flashlight reviews thank you again
@@lessstuffmorefreedom-livin6886 TY! Thanks for watching as well!
Thank you! I like this one. Turbo lasts a decent time
Thanks for watching!
An interesting direction for the new design of flashlights. The issue with the impossibility of replacing the battery is associated not only with the life of the operation. Sometimes it is necessary to quickly replace the battery instead of charging a flashlight. It would be great if information was displayed on the OLED not only about the voltage on the battery, but also about temperature or current time. The plastic lining in style resembles such linings made of artificial leather on binoculars or cameras of the past. A certain element of retrofuturism.
@@hikewomeat Thanks for watching!
I took off both ends and the battery is glued in solid from one end to the other.
That would match my vape kit the aspire deco .😊
Thanks for watching!
You spoke of the colder temps coming this Fall and Winter...I have a question, a bit off topic. I am not a Flashaholic, and don't know too much about these lights in general, but my question is: Can you leave a led flashlight such as this, outside in your car in the bitter cold of Winter??? Will it still work OK, or will it shorten or kill the battery life?
To be specific, I have a Rofis MR70, which is my favorite light of all time! Can I leave it in my car glove box?
I do all the time. I have a few in each of my vehicles and they work fine in cold weather. Thanks for watching!
@@CharlesBridgTec Thx for the response!
YW!
I have to be BL50 and I'm always hitting the side button by accident. Both buttons are too easy to push. I'm wondering if the charging port is internally waterproof because the cover sure isn't.
Thanks for watching!
Mantaap 👍
@@udinpelet7737 Thanks for watching!
Surprisingly..👍👍
Thanks for watching!
Any idea of the kelvin and cri of these emitters? I don’t see any info in the specs.
5700k. Thanks for watching!
Corrections , only comes in the black and blue model shown. Not a rubbery grip at all. It’s leather or at very least “ Leathery “.
Other colors will be coming. Leathery no, rubberized yes. Thanks for watching!
How is 6000 lumens and have an hot surface?
@@RAGEAUTTP_hates_sennejackson It gets very warm on turbo but it will cycle down due to heat for safety as shown in the night shots. Thanks for watching!
Cool light- kind of looks like a bike light though.
@@D.Trider Yes, now that you mentioned it. Thanks for watching!
I ordered the ms03, but for more than a month I wanted to order bl70. I knew you'd do a detailed review on it. Hopefully they're still in stock now that your review is in...thanks.
@@freedombridgejournal7505 Thanks for watching!
That’s mighty small for 6000lumens. I bet it will melt itself quickly and bound to quit working prematurely
Nope. It cycles down way before that. Thanks for watching though!
Man they are realising them quickly which one to buy? I am confused. 😂
Watch my reviews of them, use my link and discount code to save $$! Thanks for watching!
@CharlesBridgTec But on which flashlight? 😂That is the question?
Buy the BL70 since you replied here.
@@CharlesBridgTec That is😂👍🏻.
Oi Charles pensei que era xhp70.3
Nope. Thanks for watching!
If the Cree xhp 70.2 LED is 4292 lumens how could this light be 6000?
Simple. There is a boost driver in the light which over drives the LED. This is quite normal on high powered lights. Thanks for watching!
@CharlesBridgTec wow I didn't know that was possible! I am definitely going to look into these now
@@MAGA_Extremist it's the same way that alot of green lasers are modded etc to get even more and more power, just run into thermal issues tho, ide Imagen it would have a auto shut off like the previous bl50 model if it gets too hot, they have similar sensor module on other torches, they are the best manufacturers for quality torches rn
@Jake3eee yes I love Imalent flashlights they are up there with the best. And I have lasers too 😁. I could understand the power boosting concept I just didn't know if that was good for the LEDs I checked on the Cree website to see how many lumens does xhp 70.2 was. I guess there's always a safety factor of how much power you can put into an LED so if an LED is 12 volts it probably can take 14 something like that. I think this will be my next flashlight .
Same design as the nitecore p18
Similar but not the same. Thanks for watching!
I have 50
Wow
Thanks for watching!
53 hr = 10 lumen
Thanks for watching!
I got bl60 and it get unholdably hot when you using at max output. İ think its probably hotter. İmalent dont cares temprature just porformance and design. And rubber charging port thing is very unusual. But i like them because brave designs and nice bdys
Well, turbo is not designed to run continuously, so you are do turbo even after it has stepped down over and over, is your fault for it getting too hot. Turbo is for short burst only. Rember the size of these lights as well. Thanks for watching!
Здравствуйте много лет периодически просматриваю ваши ролики о фонарях пейзаж не меняется теже деревья всё тот же забор для меня уже стало родным спасибо за обзоры продолжайте как можно дольше ❤
@ВладимирБелобродский-ж3ч TY! Thanks for watching as well!
i'm getting a little tired of these so called flashlights that are only novelty items. who buys these anyways? oled screens, red lights, 58923 different modes that you don't need nor use, leather wraps, fashion cases, premium boxes. the flashlight industry is dissapointing me more and more. you just need a flashlight that has 2 or 3 modes tops and instead of that you get laser beams, 3 strobe modes, rgb lights, that anduril thingy, oled screens, ridiculous prices and so many different lumen outputs... i want a flashlight that is actually a flashlight and can be used as a flashlight
Then you should buy a Maglite and leave the other lights like these to us Flashaholics. Thanks for watching!
@@CharlesBridgTec but maglites are crazy expensive for what they offer, i understand the usa made thing and all of that, but they are far behind of what nitecore can do at a similar price pont (nitecore just for example)
Oh cry me a river 😂😂😂
@@ChatGPT1111 that's something an ai would say
@@onceKilos Under $30 dollars for a 3 cell MagLite on Amazon these days. Simple on and off UI.