Hair straightener Remington S9500 Pearl / Wont power on // Pegla za kosu / Ne uključuje se

((EN -- SR))
In this video I tried to repair a hair straightener. After dissembling and come checking I missed the broken chip which you can see at the end of video. I tried to find replacement on internet but without success. Maybe somebody find this video helpful like disassemble instruction or something like that (and that is the reason for video uploading) ....
Please, this video is for entertainment only, to not try anything from the video if you do not know what are you doing. Leave the job to skilled person (not skilled like me :D ).
All rights reserved.
U ovom videu pokušao sam da popravim peglu za kosu. Problem je bio to što nije mogla da se uključi. Nakon osnovnih provera na kraju sam skontao da je glavni čip pukao, što možete videti na kraju videa. Možda će video poslužiti nekome kao uputstvo za rastavljanje ili slično, inače ništa posebno ovaj put na žalost...
Molim vas, ovaj video je samo za zabavu, a da ne pokušavate ništa sa snimka ako ne znate šta radite. Posao prepustite stručnoj osobi (ne stručnoj kao ja, to svakako :D )
Sva prava zadržana.

[@MilekaRobot]

Second part th-cam.com/video/E0aDcSouRrI/w-d-xo.html

[@pc.languageteacher8448]

I found this hair iron thrown at the trash can.
For me was this video very useful, because I only in this video here uncovered how to disassemble this device. I guess that in my device is problem only with cold connection of cable to device, because when I touch cable on its knee joint, then hair iron start to work, but I did not knew how this hair iron open.
Now thank to your video I know how this iron to open and maybe if I will success with repairing knee joint of cable I will have one more plus nice gift to my wife under Christmas tree. Thank very much to you.

[@MilekaRobot]

Thank you for sharing your story, wish you all the best!

[@pc.languageteacher8448]

​@@MilekaRobot Problem was not in the joint knee, but cable was broken in the place where cable inserts to the knee joint. Pity that I uncover this only after application of tin at the joint knee, because I can spare waste work, but when I saw at the joint any scars on the surface I thought that these scares make cold contact. Broken cable at the border of knee is worst mistake than alone broken joint knee, because you have not place to join two cables together, but finally I managed it all. The way that I made it was that I cut a little bit of begin of knee and I left only the inner cables in this place of the knee and then these two ends I just join together. Joined ends finally I strengthened it with a solid elastic tube that stretched down to the body of knee and too to the begin of cable.

[@mo_on9355]

Thank you so much 😊

[@MilekaRobot]

You're welcome 😊 glad if video helps ;)

[@conmanmusic4126]

Thank you so much. Please also mention tool names that you use. This would be very useful for viewers.

[@MilekaRobot]

Thanks for comment and sorry for late answering. It is my pleasure the video helped someone :) Yes, I may start making used tools list in video description, thanks for advice! Just to find a proper way to not break the commercial rules or whatever by mentioning the tools :) Honestly, I am not familiar with that side of youtube story :)

[@emeklilik1017]

What is the Q2 code? thanks.

[@MilekaRobot]

Thanks for asking, but unfortunatelly I do not have a schematics of this motherboard :-(

[@khanafzal322]

Hi.. Am having a problem of power on.

[@MilekaRobot]

Hi, did you open the device? Probably is the same problem with chip like in video, or maybe cable is dammaged.

[@tyronearendse1722]

Hi friend thanks for the informative video, do you have the code of the broken chip thanks in advance

[@MilekaRobot]

Thanks for comment, unfortunately I do not have a designation of chip, I still searching for another broken one same model and hoping that chip inside is good :)

[@tyronearendse1722]

@@MilekaRobot thank you for your response

[@sierrawhiskey5155]

@@MilekaRobot Check eBay :)

[@ASMA-bw2ck]

Achi vid thi

[@MilekaRobot]

Thank you.

[@aleksandartripkovic4583]

Pozdrav, ja imam problem da pegla nece memorisati temperaturu, pali se, radi, greje, ali jednostavno kada se memorise odredjena temperatura brojke samo lete gore dole i nece da se selektuje neka odredjena... Ovo je slika : i.imgur.com/Y8FiZtx.jpg Pretpostavljam da je za to zaduzen ovaj IC kao kod tebe, i da nema leka ?

[@MilekaRobot]

Pozdrav, hvala na javljanju. Pa da, taj IC je zadužen za sve bukvalno, loše su izgleda projektovali to sve pa se pregreje čip i kraj, ja se po nekad setim da pogledam da nema neka polomljena pegla ili sl pa da prebacim ali nisam našao do sada...

[@aleksandartripkovic4583]

@@MilekaRobot Pa ne bi bio problem naci ga kada bi postojala neka oznaka.. bojim se da tako nasumicno prebacivanje nece uroditi plodom, nije svaki isti sigurno i nema iste funkcije.. Samo kada bi imala oznaka..

[@MilekaRobot]

@@aleksandartripkovic4583 Da da jasno, ja sam mislio na identičan model da nađem, možda je i programiran pa sve i da ima oznake da li bi uspeli da ga pokrenemo

[@aleksandartripkovic4583]

@@MilekaRobot Moguce, kanta sistem znaci..