How to make Wood Rings - bent veneer w brass Zelda Triforce inlay
ฝัง
- เผยแพร่เมื่อ 6 ธ.ค. 2015
- Free Project Sheets and helpful info in the video description. Check it out.
In this video I show you how to add a brass inlay but you can keep it simple if you want and just leave it wood. I made a Tri-Force from the Legend of Zelda because it is fairly easy. There are two ways to add the brass. Solid sheets or brass powder. The solid brass I used is .016” thick. (see link below) You can go thicker even up to .026” or more, but I would not go much thinner thank .016". The brass powder way is not as shiny but I encourage you to try both ways for the experience. You can add other designs or shapes, even small stones can be attached. I hope you get a chance to make a wood ring because it really is fun.
Free Ring Project Sheet 1 ► goo.gl/rwkOqD
Free Ring Project Sheet 2 ► goo.gl/Tu6Imn
SUBSCRIBE!
goo.gl/NPiQUX
•••••••••••••••••••••••••••••••••••
MORE RING VIDS
My Ring Q&A video: • Wood Ring Q&A! Veneer,...
My Wood Veneer test video: • What wood is best for ...
Short version of this ring video: • Time lapse: Making a B...
•••••••••••••••••••••••••••••••••••
What you will need - Materials and Tools
Super Thin CA Glue: amzn.to/2dKYD6e
Wood ID Kit: amzn.to/2dExlz8
Brass Powder: amzn.to/2dKlGyA
Brass Sheet: amzn.to/2e6A7PW
Veneer Variety pack: amzn.to/2dGFPb9
My favorite veneer packs for rings:
Domestic Variety: amzn.to/2e4pxoo
Cherry: amzn.to/2dGGEkw
Maple: amzn.to/2ekIdmR
Walnut amzn.to/2dGGjOv
You’ll also want a hobby knife set like one of these:
Simple & Cheap: goo.gl/blF1sl
Nicer to hold: goo.gl/fxl54k
Another option: goo.gl/4rrtqt
X-Acto brand: amzn.to/2dSQ2OB
Another kit: amzn.to/2e15hTr
•••••••••••••••••••••••••••••••••••
More Links and Emails
Ted's creations:
arbor_and_ore
Sauers Veneers
jeff@sveneers.com
•••••••••••••••••••••••••••••••••••
Patreon : / happyatom
My Tools : goo.gl/Htcck3
Facebook: / happyatomirl
Help translate subtitles for HappyAtom:
goo.gl/t3WrbO
Translate subtitles for this video:
th-cam.com/users/timedtext_vide...
Adam Hill - HappyAtom
PO Box 95278
South Jordan UT 84095
USA
Thanks so much for watching and for all your support. I am super grateful to every one of you for watching, commenting, sharing and being the whole reason I upload these videos! - แนวปฏิบัติและการใช้ชีวิต
why am i watching a 42 minute video about something i'm never gonna do?
it's a good video though. no hate
I watched the whole video not realizing that much time passed
lol, it wasn't until I saw this comment that I realized how long it was. Doesn't seem like it! :)
same here, its 3am. I've watched GMM @ 10pm and ended up here.
The same reason people love watching movies about dinosaurs, even though they will not likely ever own one.
lol me too
Each triangle can have a different metal in it. That might be a cool idea to try
thats what i thought he was going to do
This is just what I was looking for. How to make quality wooden jewley with fillings, with the use of simple hand tools rather then expensive machinery.
Thank you so much!
I would totally do this for an engagement ring!
If I had the tools for it.
If I had a girlfriend.
Hand Sanitizer Attack #SingleLife
Hand Sanitizer Attack hahahaha me too
I feel sorry for u
Hand Sanitizer Attack it would be worth more to your bride if you made it your self
cheaper to make the ring for yourself and no drama..well except for getting the super glue off your fingers..still at the end of the day...you made it for you and you still have independence...LOL...(mother of 3 sons right here.)
*I am in the military. Currently stationed in ND and originally from MI. Love all of your videos. I've watched all of them multiple times, including the three part videos that are hours long. Merry Christmas HappyAtom.
+Levi Bixel You may be interested in the next video ;-)
+HappyAtom Can't wait!
+Levi Bixel Ok, I'll just tell you. You were one of the winners on the giveaway. Contact me here with your mailing address: th-cam.com/users/HappyAtomIRLabout
+HappyAtom Oh! That's what you meant by the next video. ☺️ I thought you were hinting at a really long video. I can't believe I won! This is the first time I've won a raffle/giveaway in my life.
nicest nails/fingertips I've ever seen on a crafter. most smiths' hands look like gnarled troll toes.
Funny!
I’m an amateur woodworker and I’ve made a few wooden rings for myself so I can wear them instead of ruining my wedding ring and this video has given me more than a few ideas to help speed up my process for the next one! Great job!
Your comprehensive video description earned a subscription. It makes it easy to start a project with those handy procurement links.
"this guy showed me hes makeing these cool wood rings and selling them. so heres how you make them instead"
Well it's a fun easy project. But a lot of people are still going to buy more expertly made ones anyway because they are a better quality and for convenience.
+Laura Perez yeas you have really right😂😂😂
@@ayeshasaeed3140yeah of course he has, saw the photos on the mayflower.
I came here for the Triforce emblem. But did I spot a Navi moment? Gotta love the ring.
This vid probably has the least hate I've seen with this much liked
you must live under a rock braah
a lot less than IW Trailer for sure xD
Kim Zhang
@@fahadnaushad666 danny gonzalez???
Your voice, your way of explaining, the quality of the video, the sequence GOSH! Were my best 42:57 minutes spent on TH-cam!
Thanks for the good instructions! I just finished a Harry Potter-themed ring with the engraving "ALWAYS" as a Christmas gift for my best friend :) Half an inch is way too thick, though! Had to sand it down a lot. I hope my friend likes it, I think self made gifts are awesome, and even better if they look good.
ha love the 'Hey! Listen! annotation
Thanks so much for this! Best wooden ring making video I found! Can't wait to try it! The print outs are super helpful too.
Excellent project. I loved and I want to try it on soon. Thanks for sharing.
Now the Ring of Sauron will be mine
...AND IN THE DARKNESS BIND THEM.
The coca cola ring
I am Lord Gaben! ikr Mwahahaha!!!!
I am Lord Gaben Damn, welp Talion is useless sooooo who's gonna stop you? Nobody!
One Ring to rule them all,
One Ring to find them,
One Ring to bring them all,
And In the darkness bind them.
love this! I can't wait to try it!
Even though the video was long, these rings seem super easy to make and moreover do not require any high tech tools or something ! Am gonna make a bunch of these for people and myself ! Thanks a lot ! hoping for more such projects ! :)
I've been looking for inspiration for my own products and new channel after letting my old YT channel tumbleweed into nothingness. And you're back to TH-cam after a long break too. THANK YOU for posting this 4 years ago. I'm buying laminate tomorrow! What can I say except.... WE LIKE IT VERY MUCH :) . X Caz
Thank you Cheff Cristofer for translating this video into Russian!
f
HappyAtom
HappyAtom no problem
Skull Ring tutorial.
Kurt Curyujmmm
Dude really good ideas and cool. I build guitars and you gave me an excellent idea thanks brother
I watched some other videos on how to make wood rings and I believe that this is one of the easiest way to do it...thanks for posting
Wish Ytube existed when i had woodcrafts back in school... This is awsome!
Well done!
+Make Something Thank you!
I really liked the powder method. Seems less fiddly than cutting and filing triangles to the right size. I also allows for more intricate patterns. Subbed. =)
*LOVE, LOVE, LOVE the ring you made! I am going to try to do a couple with my grandchildren.
reaaaaaally nice. one of the thousand things you watch and probably make it!
Muito bom amigo!!! Forma simples de se fazer arte!! parabéns!!
Thank you!
Its not often that youtube gets its suggestions right, but now it did! Glad i found your channel! Nice project, i might try this one day! Have a great 2016!
+Willem Kossen Thank you!
+HappyAtom Hey, What do you need to make this? And i hope you don't need clamps, It's kinda hard to watch a 42 minute video hahaha
never too old to learn something new ... thanks for sharing !
That ring looks so nice!
Very nice. You got yourself a new subscriber! Good job! Thank you!
same
Same! :)
I have a sister, she loves Zelda, so i will make it for my sis! 😱😱💕💕😀😀😄😄🙌🏻👌🏻👌🏻👌🏻👍🏻👍🏻👍🏻
please no more
+DedRuck what's your problem??
D. Art the emojis, please, they poison me
+DedRuck XD ok sorry!
+DedRuck so what
This looks so incredibly easy!!! I was ready to see a lathe and jewelers saws and resin but no! Shockingly easy! Actually looking forward to trying this sometime in the future.
Prolly already answered by now, but pennies were roughly 95% copper through 1982. There were some steel pennies during WWII, but they look steel, are obvious & mostly collectors have these.
Great video on making rings! I may just do this!
I stumbled onto this channel on my Roku streaming with the auto on... Love stumbling upon awesome videos like these!
Great stuff! TY!
If Link gave that ring to Zelda, she would love it!
Super glue was developed to glue wounds. That's why it's so miserable at gluing almost everything except your skin.
Just..wow
The original cyanoacrylates (the chemical name for the glue) were discovered in 1942 in a search for materials to make clear plastic gun sights for the war, and scientists stumbled upon a formulation that stuck to everything that it came in contact with. However, cyanoacrylates were quickly rejected by American researchers precisely because they stuck to everything! In 1951, cyanoacrylates were rediscovered by Eastman Kodak researchers Harry Coover and Fred Joyner, who recognized its true commercial potential, and it was first sold as a commercial product in 1958.
+DrSchoen my resistant materials teacher cut their finger and glued it and continued
xD
ZackMusic
awsom
this takes mad patience when putting in the brass. I was getting frustrated just watching. props to you for staying so calm
This looks like alot of fun when i was working i always used my hands and i feel like I'm
going crazy becuz i have nothing to do.I love this. Awesome job on showing people how to make them.Ty.
Ok wait! I just had a cool idea, what about make a ring for each of the spiritual stones from Ocarina Of Time! I am so going to make that! 😄
That's a great idea. Send some pictures when you are done!
I beat OoT 3 days ago
I was like omg December 7th didn't even come up yet xD....oh 2015...Who's watching this Before December 7th 2016?
Kawai Enos, Jr. Dec. 2 lol
gfy
Thanks for the video, love the idea of filing the metal, can be very creative with using different metals to make color designs.
Frankly speaking..I'm not into wood and stuff, but your passion into this area grows a interest in me to make one of those. Will surely make a ring ..and its on my to-do list. Great work! :)
Wood master, tell me, please, tell me your secrets
I only clicked because of legend of zelda. Sorry
same lol
and I thought it was an illuminati symbol smh
Get out.
Burrito Draws same
Thanks again for this video! I saved it for later because I found it really great! Gonna FINALLY try it. So thanks again!
Your video is brilliant and your voice is surprisingly hypnotical to listen to
If you want to improve bending process, i would soak the veneer in ammonia hydroxide rather than hot water. Its a little nastier (safety wise) but the wood won't kink and once dry, it will 'set' in the new shape rather than slightly springing back.
Also a ring mandrel is like £7...
I didn't finish watching the video when i wrote this, you used super glue?! wood glue too good for you? godamn pva would have suited this job better.
+Stephen Bathory I will have to try that some time. Thanks for the suggestion. The superglue makes the wood waterproof and rock solid.
+Colin John Cunningham Way to make what could have been a helpful comment sound pretentious as all hell. Not sure if you meant it that way but you come off as more of a snob who like to throw big words around not a professional. Also next time you leave a comment like that, there's really no need to tell someone that you didn't like the project first like he was looking for that validation before you add your two cents.
+Stephen Bathory I definitely wouldn't use wood glue, because not only it isn't waterproof (by far!), but all the stuff emitted by the human skin would make it fall apart in no time. I'm assuming that the maker of the rings would want his rings to be wearable....
+ZombieAlchemist As a fellow but mere amateur woodworker, I also didn't
care for the obviously amateurish nature of the video (the figure/chatoyance(the optical waviness in the wood is called "curl" and NOT made based on how it's cut as the ignorant video states, but an uncommon way the wood grows). Also, bent wood lamination can be done using water for soaking and also with PVA glue, but also as corrected, other fluids and adhesives are much more suited o this particular project since it's a very tight wind as well as needing to be waterproof, which obviously this amateur that only saw
someone do something cool and wanted to make a buck off putting this up would not know - a disservice to the watchers as well as the true pros that put other more informative and correct videos up on the topic. I'm NOT a pro woodworker as stated, but a decent amateur who appreciates Colin for saying he's a Pro since it differentiates himself from the video author as someone who actually knows what he's talking about, as opposed to simply being pretentious!
Thanks anyway HappyAtom for sparking people's creativity and possibly getting people into the craft, a rewarding and useful hobby. I'd just do a little more research first so as not to mislead your viewers or sound too much like you have no idea what you're doing to anyone with just a little knowledge about the subject.
Additionally, if the springback isn't as much of an issue, you could still use Tightbond III since it is waterproof. After which, a finish will protect it better from acids and moisture from fingers (varnish is most suitable or a oil/varnish like Watco Danish Oil, which can be re-applied as it wears) .
-_- . . . I feel like such an idiot. When he was sanding I tried to blow the saw dust away.
AHHH MY EYES
+Elham Naderi What??
When you blow it it would of gone in your eyes! 😵
+SUPERMAR10312 XD
+SUPERMAR10312 when he was glueing i was squinting my eyes becuase i thoguth there was going to be fumes.
Love this ring making video. I'm going to try it and put my own spin on it and if it turns out I will send a video to boot. Thank you I enjoyed watching this.
Thank you for this tutorial! Happy with my new ring!
Why did i watch all 40 mins of this video, I dont even have sand paper!
You just made me notice how much time I've spent with this video :v
Is there any hardware store that I can get veneer at. I went to Home Depot, Hobby Lobby and no store has the veneer you use in this video. Any suggestions would help
You wont find it at any of those stores. Just some woodworking stores carry it. I have several links in the description for buying it on amazon. Here are a few:
My favorite veneer packs for rings:
Domestic Variety: amzn.to/2e4pxoo
Cherry: amzn.to/2dGGEkw
Maple: amzn.to/2ekIdmR
Walnut amzn.to/2dGGjOv
Rockler is a woodworking supply company. They have physical stores all over the USA as well as online. Top quality stuff in every catagory. www.rockler.com/wood/veneer
You can also make your own veneer with a bandsaw. There are videos on TH-cam to help you out with that.
LOVE the brass filings, idea
Beautiful piece of work
When you thouht that the video was 8-10 minutes long and you realize is actually 42:00 minutes 😐
''It's really easy'' *looks at video length* over 40 min *thinks it's not easy*
do you think making actual rings is an easy process :) I think "it's really easy" is all in compared to what... compared to a week making a ring... yup 40 mins is easy lol
i watch this vid on Morning 5:50 o' clock meanwhile it's 6:34 o' clock i dont knew that the vid is so long its feels like 10 minutes
The amount of time does not indicate how hard something is if u watch TH-cam for over 40 mins it's not hard
make one out of a metal, go on ill count, ill see you in a few weeks
i dont think he has finished making it still 5 months later
This is the first time that I see your channel and I love it. I'll try to do the ring
Amazing! I love it! thanks for sharing!!
I feel sorry for your hands O_O
Saskia Hartmann that's why he needs a ring, jewelry is a distraction from imperfections..
* I am 14 years old and they brought wood shop in my high school so I might do wood shop next year
+Alan Soto Do it! Also if you have a chance to take metal shop go for it. I wish I did when I was in highschool.
+Alan Soto You may be interested in the next video ;-)
First time watching and I am so impressed, , * I am 75 and live in Gold River British Columbia, Canada* I have subscribed to you channel and look forward to learning so much more...love the ring and that will be my first project. I'll send pictures when I have finished my first one. Again, thank you and I look forward to seeing more videos and learning more.
Roger Steele
Very nice project, loved it, gonna do it as soon as I can.
what cloth should i use when coating glue?
In the ring test video I show what to use. It's the shop paper towels.
,..฿฿!
yo mama
*> Step by step detail, material nad cuttig list and more: >> [ **t.co/Bzrqt3CkQV** ]
how do still have skin on your fingers? dude
Dear Happy Atom
I live in Chicago, IL. and I'm a huge Legend of Zelda Fan! i grew up playing Legend of Zelda Ocarina of Time on the N64! I always thought wood rings had to be carved out of a solid block. Thanks to you My view has changed for the better! So Thanks a ton!!!
The * symbol is an amazing idea and I'd like to experiment with ways on how to make a ring with * around the entire ring. Also If I can figure that out I would make a wooden ring with the engravings like the Lord of the Rings and Celtic Knot patter!
Thanks again,
your viewer,
William Gumina
Fixing that triforce was quite the quest 'ey. Well done looks good :)!
That glue said 420. So i think u can cape it
19:20 - Why not just glue them while they're still in? It is penetrating glue after all.
+MrSeagull
Penetrating doesn't mean it penetrates brass and gluing it before setting the brass makes sure they're glued on the back as well instead of just the sides.
Great video! You are very clear and you really seem like a nice guy! Great project! Will be makin' some rings! THANX A LOT!
probably the only thing I'll ever be able to make from these diy videos.
Can i paint the wood? Let's say black?
Yes.
You'd be better off staining it :)
Thanks. :)
Or you know, getting ebony veneer instead.
I tried ebony veneer. It's near impossible to bend that tight.
can u be my dad?
Really awesome video!! Thank you for the time and fun invested I enjoyed it!
Really awesome video, you peaked my interest so I will attempt something similar in the near future. Keep it comin
My Dad is in his mid-forties and only has back problems because of an injury during his time in the navy so your good bro
Awesome idea! I would love to make this :) Thanks for the video.
I really liked your job, pretty nice, congrats!
rod from barrow in furness ,cumbria ,uk
lov the rings never seen woodern rings before
i will have a go at it
thanks rod
love this video. i am going to start this hobby tomorrow.
This is such a cool project
that was really cool! keep up the good job!
really loved your project!
I was on the edge of my seat during the gluing in of the triangles!!!
A must try for me. Thank you.
Liked for your 20+ year passion for MST3K.
Was one of my favorite shows back when I was a teenager.
I really love the stuff u do on here I plan on making a promise ring and making my own design for it
Actually REALLY liked the earlier jagged one!! Set in resin and then finished would still present a decent end result (in my thinking) Many Thanks for you post
Great idea. Thanks for sharing.
Zelda fans will love this. I know a couple that is OBSESSED with tloz and I think they would love a ring like this when they get married. PS you earned a subscriber!
Hey thanx for the great ideas. I'm from Seattle and love doin crafts as gifts. ***Merry Christmas***
This is brilliant. And thank you for telling us what sanding grit grade you used each time... very useful!!!!
amazing! I did love it! Congratulations!
ive watched this video all the way through a few times and am now making my first ring. I'll post pics when I'm done but I've already found a couple obstacles that I will share
Nice job, good info, well done mate.
Fahhhhhbulous - now I know how to make one for my bass playing pal which will be so appropriate!
That was an amazing video! Very inspiring! Also I used to love Mystery Science Theatre!!!
Awesome! I saw your video this week, ordered some veneers, a good superglue and made my first 3 rings today. I like tinkering with wood and these rings are so simple to make and look great. Guess i need more fingers soon :D Thank you!
So cool! Thanks for your comment.
all my favorite video's express the depression of aging in there beginings.
16:14 Which tool did you use? Or did you have that ones? I'd like to try...
Yo this is some grueling work. Props to you man. Maybe one day I'll try it, maybe sell some, but they take so long to create! Good job, love it.