Dude I don't understand why you got your hands on that tubing. Your hand on there is pointless it don't do nothing, can't believe the operators letting you do it too, Anyone on a rig knows about metal splinters 😂 you'll learn when you meet one.
I was wondering the same thing. Why is he doing that ? Also it must be nice not having to put up handrails we would never be able to get away with that.
Man that’s clean. You guys just tripping out after logging bottom? I don’t see any rods. Jussayin that I hope for the sake of your roughneck’s fingers it’s all brand new. Why the hell does he have his hands on the pipe? A little advice? The rod boxes can wear razor sharp, almond shaped holes in the pipe that will take a finger off so quick you’ll see the red stripe before you recognize it’s gone.
I start my first rig job end of month, made a video about it 3 days ago. I I CANT FUCKING WAIT TILL I GET OUT TO ALBERTA ON SERVICE RIG RIG 109 HERE I COME!!!!!!!!!!!!
@@marcusslaughter3072 first thing I would say is nothing you have ever done will be as hard as this. Listen when people are trying to teach you something, do whatever they ask as fast as you van, do not go slow. If you have nothing to do and people are to busy to tell you what to do. Dont be a pest, grab a rag start cleaning, get as much rest as you possible can you will need it. Never let your fellow brothers work without offering to help. A good driller will be patient up to a point. But your going to be making a lot of money. I am now on a drilling rig making 15,000$ a month, half of that is tax free. Woth only 3 months exp get out service rigs get onto drilling rigs. Work harder than everybody on your crew, dont ask for breaks, just keep working hard fast, you will be ok. Take lots food with you for lunch, eat as healthy as you can, drink a lot of water avoid energy drinks you will crash hard when you get to use to them.
Prolly feeling for deep grooves from the rods. My guess is there pulling pipe because theres a hole in the tubing somewhere. And hes feeling for deep grooves and replaces those ones. Notice the pipe laying on the ground behind the operator? Thats extra replacement tubing in case he finds some worn down bad. Thats just a guess tho. Could be anything. Used to work the rigs. Good money but hard work.
Sorry to hear that man. We had a rod elevator come unhooked too. Parted fiber rods. No damage to the hook, must've just opened momentarily from the shock. No one hurt but the operator was very lucky
@@warrioralumni08 naaa man there's nothing gravy about working floors on a workover rig. What you're seeing is probably the easiest part of the job. You don't see them breaking those rods out or breaking the tree down or putting on the bop's. Rigging up the snubbing unit or birdbath if there is one. It's the ground work that gets the floor hands
@@Backyard-yz3mfalso if you watch this guys fumbling around. doesn’t have tongs in low half the time or has the door closed. Little stuff that adds together and makes everything way to slow
![“อ.เบียร์ คนตื่นธรรม” มาตามคำเรียกร้อง แหกศาสตร์ฮวงจุ้ย เตือนสติอย่างมงาย | แฉ 7 พ.ย. 67 [1/3]](http://i.ytimg.com/vi/5fc4S3xBNfc/mqdefault.jpg)
He's single out. bring back memory's good old oil field days.
Rig Pusher nice flow coming back with that pipe.
thank you for your service.
Dude I don't understand why you got your hands on that tubing. Your hand on there is pointless it don't do nothing, can't believe the operators letting you do it too, Anyone on a rig knows about metal splinters 😂 you'll learn when you meet one.
😂😂😂🤣🤣......I unfortunately met one when I first started a year ago, now I back my ass up
How else do you check for holes? 😂
That's what tubing tester are for ....you really think your gonna find a hole that way lmao
@@taylorrasmussen3284 lol I think they're hazing you bro.
I was wondering the same thing. Why is he doing that ? Also it must be nice not having to put up handrails we would never be able to get away with that.
I've never seen pipe tripped this slow
Yea man i used to smoke that shit out of the whole have that rig screaming
Insurance man watching😊
Taking a brave look inside my self.
Ha found ya on TH-cam these algorithms are scary how’d it know
Stay safe outhere in the patch brothers wrench hard
Man that’s clean. You guys just tripping out after logging bottom? I don’t see any rods. Jussayin that I hope for the sake of your roughneck’s fingers it’s all brand new. Why the hell does he have his hands on the pipe?
A little advice? The rod boxes can wear razor sharp, almond shaped holes in the pipe that will take a finger off so quick you’ll see the red stripe before you recognize it’s gone.
Why did he run to the truck?
that has to be the slowest rig ive ever seen.
Thats just how the process is.
Wete i come from when run pole an lay the rods an tubing out on the ground there is a few companies that run derrick.
With morden tech tools and equipment upgrade the job is greater easier.
I start my first rig job end of month, made a video about it 3 days ago. I I CANT FUCKING WAIT TILL I GET OUT TO ALBERTA ON SERVICE RIG RIG 109 HERE I COME!!!!!!!!!!!!
Bro I’m about to start my first job for H&p and I’m going into it blind so what’s it like man
@@marcusslaughter3072 first thing I would say is nothing you have ever done will be as hard as this. Listen when people are trying to teach you something, do whatever they ask as fast as you van, do not go slow. If you have nothing to do and people are to busy to tell you what to do. Dont be a pest, grab a rag start cleaning, get as much rest as you possible can you will need it. Never let your fellow brothers work without offering to help. A good driller will be patient up to a point. But your going to be making a lot of money. I am now on a drilling rig making 15,000$ a month, half of that is tax free. Woth only 3 months exp get out service rigs get onto drilling rigs. Work harder than everybody on your crew, dont ask for breaks, just keep working hard fast, you will be ok. Take lots food with you for lunch, eat as healthy as you can, drink a lot of water avoid energy drinks you will crash hard when you get to use to them.
@@whoispriest what kind of heights will i be dealing with as a floorhand? i am interested in h&p as well
@@joshuao5665 that depends, from 25 feet to 50 meters. That entirely depends where you are who your with.
@@whoispriest guess I will give up my hopes of floorhand or frac
No chains?
Why did he touch the pin end of the tubing?everytime when he broke out the tubing?
Prolly feeling for deep grooves from the rods. My guess is there pulling pipe because theres a hole in the tubing somewhere. And hes feeling for deep grooves and replaces those ones. Notice the pipe laying on the ground behind the operator? Thats extra replacement tubing in case he finds some worn down bad. Thats just a guess tho. Could be anything. Used to work the rigs. Good money but hard work.
He’s checking how dirty the inside of the pipe is so they can have the hot oiler pump hot water down it
Checking for rod cut
New bit , two jobs at once
Wish I could go back to the patch. Paralyzed in 2011 on the rig floor when the rod elevator came unhooked at the pickle board
Damn that's crazy. Sorry to hear that man. What exactly happened?
😮
Sorry to hear that man. We had a rod elevator come unhooked too. Parted fiber rods. No damage to the hook, must've just opened momentarily from the shock. No one hurt but the operator was very lucky
Don't they needed to be going slower if someone has their hands on thenl tubing?
Its cause there a bunch of worms
If there were phones camera in my days. This type of action would be recorded 1993. Rigger.
What kind of shity tongs are those
Thats a heavy duty double,solid winch lines the rig sounds good,im guessing 6 line or 8 from the speed?
heavy doubles don't have a rod basket 8 line blocks are too slow for rods
@@1ImrichardI def worked on an 8 line falcon and whiting made us put the basket on, and we did production.
what company
Nice safety rails.
C Leh fuck safety rails 😂
Man, this looks like gravy compared to water well drilling. 🤔🤔🤔
😂 yeah bro try three round trips in a day on a 6000ft well. including a cleanout. Then tell me its gravy.
@@andrewcrawford3806 Cool story bro, 90 foot stands, 230 joints. 👍 Sorry that you got so offended, snowflake.
@@warrioralumni08 naaa man there's nothing gravy about working floors on a workover rig. What you're seeing is probably the easiest part of the job. You don't see them breaking those rods out or breaking the tree down or putting on the bop's. Rigging up the snubbing unit or birdbath if there is one. It's the ground work that gets the floor hands
Water 😂 lololol obviously u ain’t no oil man - just a waterboi
Activate well / deactivate danger.
Maybe theu dont ha a wiping rubber that the only reason i can thank of y he would b holdin on the tubing
Actually hes feeling the pipe for holes but yea everyone is right these guys are sorry and slow my SK1000 runs faster than this
@@edwardenriques7354I've seen it run it wasn't impressive
i remember back when i worked oilfield in the late 90s if you was this slow your a** went home someone else came and did your job
They're looking for holes in the tubing hence, the slow running. Also short handed. Only one floor hand.
@@Backyard-yz3mf it doesn’t take two guys work the floor while pulling tubing…
@@Backyard-yz3mfalso if you watch this guys fumbling around. doesn’t have tongs in low half the time or has the door closed. Little stuff that adds together and makes everything way to slow
Pooh - rih
No ( mud loggine )
No mud
🤔
And put a wiping rubber on
Is that why his hands are on it?
You guys roughneck like old granny’s lol the hand situation is getting pretty bad every where
That's cute
Derrick hand slow
bj tongs with manual backups
Have to say those tongs an backup are well u know
Really slow pace too
Pablo Deleon I was a worm when I took this, come out I’ll work circles around you. 🤪
Taylor Rasmussen you know if y’all are hiring? Just got out of the army looking to get into the field
@@taylorrasmussen3284 You'll be too busy 'looking for holes' in the pipe haha
Taylor Rasmussen why are you touching the tubing when your coming out ?
Those have to be the worst tubing tongs i ever seen
I've used them they run fine
Easy money...
How much monthly?
dont be acting like your mom child
Slow as fuck
This whole operation is a joke!
Why don't u run a wiper instead of ur gloves