Correction stupidest. You can Okie engineer a spinning chain with a snatchblock. Or may fix the pipe sinner hanging there on the rigs' rotary side of the draw works. What think now hoss.
Back in 2008, while Drilling for Lewis Petro in Encinal Texas, a so called “safety man” showed up in the rig floor demanding I wear gloves while handling the Brake tripping in, I run him off the floor and he went to my Toolpusher and told him what I had done, Toolpusher then run him off the location. He didn’t know why we run him off but he never mentioned it to his office. 🤣🤣🤣🤣🤣
What happened where is pipe spinner?? Why you the Rig Manager not aware of that the non availability of pipe spinner due to spare parts or other constain ! Unnessary humiliation of man power of the Rig!!
@@utpalsengupta6872lmfao I had an st80 (iron rough neck) break down and then the air spinners clapped out half way in the hole. Stuff breaks, if you don't know that then you haven't worked on rigs for very long
Cathead use for torque up the joint nd their is no hydraulic roughneck on rig as per contract... We use pipe spinner ,but it's chain was broken ,so till it ll not fix ,ll use chain tong....man power...
A 2000hp SCR top drive rig and they didn't have a PM program, critical spare parts, and nobody knew how to throw a chain? The tool push needs to be fired.
Si amigo,con todo respeto solo hay una sola forma de hacer las cosas y esa forma es bien.Si te sirve puedes preguntar estoy a poco de jubilarme y tengo 35 años de trabajo en la industria
They should have been able to bite a tong and spin the rotary to disconnect the pipe. Not sure why they didn’t do that. However, when putting a new pipe in you have to rotate the rotary backwards, this risks back spinning a pipe down below and dropping your pipe in the well , which you have to “fish” out later. This applies to a table rotary,
The pipe spinner is hanging from a line on the rotary side of the draw works. The spinner is either broke or, them are idiots showing how tough they are. Running around in circles is about all they are accomplishing any way. Who is the guy running back and forth with the camera.
Oulala, guys ! Never ever grease a pipe by the box when it is on the well. The pipe dope can go through the DP. #DROP On of them didn't wear gloves. For the pipe spinner I understand because mine is actually broken down also 😆
This how to run a job th-cam.com/video/UVh_Jv0n1ZQ/w-d-xo.html I can't believe people still work in conditions above. Not the crews fault. Its the owners.
@@mayankbarot775 When I worked the West Texas patch we had spares to fix or replace the spinning chain. Let me guess someone let the chain get wrapped around the rotary table and broke it?
In India its different...The slow work the more operating per Day rate earning for the contractor...otherwise during interlocation movement the contractor doesn't get any operating day rate....They only get lumpsum amount just for interlocation movement....So they start movement and rig up very very fast and slow it down once drilling starts...The rates here in India are not good
They're gettin the job done...I miss workin those floors
You know who the driller is, he's the cleanest one.
The Toolpusher is in the trailer sipping a latte in his slippers.
It's more like watching the company, porn, safety channel on TV wearing nothing.
That’s the silliest thing I’ve seen in a while. Grab your purse when relief shows up
Why are they not using spinning wrench which is hanging just like that....
Crazy crew.
Its probably broken and they refuse to spend money to fix it. Isnt there anyone who can throw a chain on this rig?
Floorman good job.
Those are the fastest men alive
Correction stupidest. You can Okie engineer a spinning chain with a snatchblock. Or may fix the pipe sinner hanging there on the rigs' rotary side of the draw works. What think now hoss.
I feel like im flying Jack!
Mayank bhai post more video of rig
Ok
I am requesting because I want to learn
Back in 2008, while Drilling for Lewis Petro in Encinal Texas, a so called “safety man” showed up in the rig floor demanding I wear gloves while handling the Brake tripping in, I run him off the floor and he went to my Toolpusher and told him what I had done, Toolpusher then run him off the location. He didn’t know why we run him off but he never mentioned it to his office. 🤣🤣🤣🤣🤣
Ha Ha Ha ...
Aapdu crew joiae
@@mikipatel6681 hello
Bro help me how to get electrician job in drilling rig field
برج ٢٢ التابع لشركة الحفر العراقيه يشبه هذا البرج بالضبط ... في حقول شرق بغداد
فووول تعب💔
what's wrong with using the pipe spinners right behind them?
Chain of Spinner was broken... Mechanic went to store for new one then we continue r/in till Spinner ll be not ok...
What happened where is pipe spinner?? Why you the Rig Manager not aware of that the non availability of pipe spinner due to spare parts or other constain ! Unnessary humiliation of man power of the Rig!!
@@utpalsengupta6872lmfao I had an st80 (iron rough neck) break down and then the air spinners clapped out half way in the hole. Stuff breaks, if you don't know that then you haven't worked on rigs for very long
Good job 👍
Boys need a Rotating Mousehole Tool for building stands and laying pipe down.
They're tripping in the hole why tf would they need a rat/mouse hole?
Miss u frnd
Where is the cathead or hydraulic roughnecks?
Cathead use for torque up the joint nd their is no hydraulic roughneck on rig as per contract...
We use pipe spinner ,but it's chain was broken ,so till it ll not fix ,ll use chain tong....man power...
@@mayankbarot775 thank you for reply . I'm a student right now.I hope I'll be an oil and gas engineer soon
Good job sir👌👌
Other than the guy chasing his boyfriend, looks like there handling there job pretty well!!!
😂 this tickled me
There is chequers design floor but it's not reliable now a days modern age we should more conscious regarding SAFE SYSTEM OF WORK.
2 words....spinning chain.
A 2000hp SCR top drive rig and they didn't have a PM program, critical spare parts, and nobody knew how to throw a chain? The tool push needs to be fired.
My last push was doin hard drugs on site and blaming me for sh$t....I walked
Cable catheads... I doubt they have chain on that rig. Not many companies do run chain anymore
I never saw anything like that before.
th-cam.com/users/OilandGasDrillingWorldwide
And why do they call them thing Slips when they are really Non-Slips?
Oh they slip alright & YOU get glared at
Mayank Sir I really love this video
slow work…not saudi aramco rig - nice rig tho, a john?
Cuidate mucho,y la mejor para ustedes,cebollitas!!😂😂😂😂😂
I can't see the weight indicator
Very good works
Drill Baby Drill !!
I don' t know why they no use the chain or use the spinner for turnninh on the dp's?
They are not using impact hand gloves, mud / water spread everywhere & there is no anti slip pad in place likelihood of slip & hand injury may exist.
Why don’t you use your rotary table or pipe spinners
Very nice video...
Semangat ....dan berhati-hati ✊
God job
Thank u sir..
Very very good job
any clue where this rig footage was taken? Asia?
Why?
@@mayankbarot775 Baramura??
India
Si amigo,con todo respeto solo hay una sola forma de hacer las cosas y esa forma es bien.Si te sirve puedes preguntar estoy a poco de jubilarme y tengo 35 años de trabajo en la industria
What’s wrong with rotating it in with the rotary?
Bad video for the Tube
They should have been able to bite a tong and spin the rotary to disconnect the pipe. Not sure why they didn’t do that. However, when putting a new pipe in you have to rotate the rotary backwards, this risks back spinning a pipe down below and dropping your pipe in the well , which you have to “fish” out later. This applies to a table rotary,
Something wrong with rotary table.
They'd be spinning the rotary table to the left? That's usually a good way to back stuff off. I know I would never do that
Work must safety first... Keep this moto ND work with same stamina for 12Hrs...
Rig Manager where is your drill pipe spinner ?? Why wasting man power!!
The pipe spinner is hanging from a line on the rotary side of the draw works. The spinner is either broke or, them are idiots showing how tough they are. Running around in circles is about all they are accomplishing any way. Who is the guy running back and forth with the camera.
I love this drem
Nice
Were are you working
Why? Have u any job?
@@mayankbarot775 yes
@@mayankbarot775 you not answer me
@@mayankbarot775 www.tempcodrilling.com/ send your CV
From what ?
شكرا لجهودكم تحياتي
I believe I see a pipe spinner floating in the back wondering why don’t these guys use me ?
Oulala, guys ! Never ever grease a pipe by the box when it is on the well. The pipe dope can go through the DP. #DROP
On of them didn't wear gloves. For the pipe spinner I understand because mine is actually broken down also 😆
Helo sr aapka video nhi aarha kyo
Push the bell icon
This is the old way....... Big money drilling companies have State of art equipment.
Not always true
Bravooo
ارامكو السعوديه 😍😍 Saudi Aramco
Ring around the rotary table
Pliz explain in brief sir..... Or parts k name b bataw
Great job...
tds model name??
no copper coat on them joints
Watch at 02:41 ... they're using never-seize, perfectly fine in my book.
Look soo Very busy
from where you get Aramco helmet / hard hat ??
Gifted by friend..
Why do not you wear safety glasses?
Great jobs
Wtf connection ia tht
deep industries rig or john energy??
Johon energy start in Kuwait
@@binuvarghese543 Honestly never knew there were jungles in Kuwait. Learn something new every day.
My son is safety officer Das offshore Rig
It's great
I want work in oil company
@@mayankbarot775 sir i wan work in oil company
Mucho tiempo así, se corre el riesgo de que se pegue la tubria
Great
👍👍!
Nice one Sir
Tnx bro..
This how to run a job th-cam.com/video/UVh_Jv0n1ZQ/w-d-xo.html
I can't believe people still work in conditions above. Not the crews fault. Its the owners.
That's John energy rig
Yaa
I am John employee dude
😂😂😂😂😂😂 العمال يربطو البيب man drilling 😂😂😂😂👲👲
and where are the drillers safety glasses? you are supposed to lead by example.
Just use the router table man
Got tird of lost time accidents W/ missing fingers from spinning chain.
That rig need Mexicanssss
Thats not even close to what that old 1320 can do. I drilled on one for years!
I'm chef électricien in drelling rig in Algeria l need wark
Plz koi meri help krdo mujhe oil.rig mai jana
How old are you?
I want work in oil company
Apply for ADNOC because ADNOC is going to start hiring.
Where is the safety guy😡😡😡😡
These first 2 videos looks like a bunch of worms
Aslii
Todos cebollas!!!!!
Hacen arder los ojos
Tu eres mejor?
John 17 kg basin ap, india
John 17 mandapeta right haha
Ei Kela, gutaiketa axomiyasun
I didn't see a hand job anywhere in this video. Kinda disappointed....
Sir mujhe जॉब करना है john में
Where is your spinning chain? WTF was that? I bet every one of those hands have a purse in the doghouse.
Spinning chain was broken...
@@mayankbarot775 When I worked the West Texas patch we had spares to fix or replace the spinning chain. Let me guess someone let the chain get wrapped around the rotary table and broke it?
@@Jacks_Human west texas hands are worthless
@@BiggRude02 As are hands named Rodolfo for anything other than polishing the tool pushers "Tool".
@@Jacks_Human oh man you got me.... except I got worthless west texas hands to do that since I am the pusher
Manual rig
Aslamalikum.
Any body know rig jobs plz help me
Yep...apply at H&P Drilling..or Nabors Drilling...
Rod Powers I applied many times but no response
Hand Job. Wtf 😂
Yeah floor hand is the job title that's their job
Lol
They work waaaay slowwwwwwwww
ممتاز هذا جيد
Slowest crew I’ve seen...
In India its different...The slow work the more operating per Day rate earning for the contractor...otherwise during interlocation movement the contractor doesn't get any operating day rate....They only get lumpsum amount just for interlocation movement....So they start movement and rig up very very fast and slow it down once drilling starts...The rates here in India are not good
Hand job lol
Worst practices ...!!
Idecoe
LOL omg