Set symons wall forms all the time. If the wall is an 8" wall your outside corner forms will be 14" forms, if it's a 10" wall outside corners will be 16" forms. The thickness of the wall plus the 6" inside corner determines your outside corner form width. It's more simple to nail 2x4 plates to the footer & then lay the plate out so you'll know what forms you'll need.
Its crazy to see how many different methods to foundations there actually is. Ive been using advanced forms and the ties with the 5-6 bar system and i dont see how people can use anything else 😂😂
Great video! Good tips too, for right/left handers. Also love how the little guy is growing up in a construction zone just like his cousins! 😃
Nice Work
Set symons wall forms all the time.
If the wall is an 8" wall your outside corner forms will be 14" forms, if it's a 10" wall outside corners will be 16" forms.
The thickness of the wall plus the 6" inside corner determines your outside corner form width. It's more simple to nail 2x4 plates to the footer & then lay the plate out so you'll know what forms you'll need.
Jeff I doing this soon. Do I start with inside forms or outside
For latch panels, it’s 4 inches, due to 4 inch inside corner, so 10” wall the fillers on the corners will me 14inch.
This is as clear as mud to me. How can a house contain walls made up of only increments of 4' or 8' ?
I’ve pin drilled a 2x4 on the strip footings as a sleeper and sat my panels on it.
Good job
Put your pins in first, then hang the ties on the pins, then carefully slide your form on. You can really move this way when you get good.
Its crazy to see how many different methods to foundations there actually is. Ive been using advanced forms and the ties with the 5-6 bar system and i dont see how people can use anything else 😂😂
Nice! Can you share how much the rental for those forms is?
Don't do the inside and out on the nails. Center otherwise when you get a bent form or something you have to move you'll be in trouble.
Oe gringo no me podes dar trabajo?
Get some boots