Engine Oil & Oil Filter Change || DIY Step By Step Guide || Yamaha FZSV3
ฝัง
- เผยแพร่เมื่อ 3 ต.ค. 2024
- Importance of Periodic Engine Oil and Oil Filter Change
Regularly changing your motorcycle's engine oil and oil filter is crucial for maintaining optimal performance and longevity of the engine. Fresh engine oil ensures proper lubrication, reduces friction between moving parts, helps in cooling the engine, and prevents sludge build-up. An effective oil filter removes contaminants and debris from the oil, preventing them from causing wear and tear on the engine components. Neglecting these maintenance tasks can lead to reduced engine efficiency, overheating, increased fuel consumption, and ultimately, costly repairs.
Step-by-Step Guide to Change Engine Oil and Oil Filter
*Tools and Materials Needed:*
New engine oil (check your motorcycle manual for the correct type and amount)
New oil filter
Oil filter wrench
Socket wrench or spanner
Oil drain pan
Funnel
Clean rag or paper towels
Gloves
Motorcycle stand (optional, but recommended for easier access)
*Steps:*
1. *Preparation:*
Ensure your motorcycle is on a stable surface. Use a motorcycle stand if available.
Run the engine for a few minutes to warm up the oil, making it easier to drain.
2. *Drain the Old Oil:*
Locate the oil drain plug, usually found at the bottom of the engine.
Place the oil drain pan underneath the drain plug.
Use a socket wrench or spanner to remove the drain plug. Allow the oil to completely drain into the pan.
Once drained, clean the drain plug and replace it, tightening it securely.
3. *Remove the Old Oil Filter:*
Locate the oil filter, which is usually on the side of the engine.
Use an oil filter wrench to carefully remove the old oil filter. Be cautious as it may still contain some oil.
Clean the area around the oil filter mount.
4. *Install the New Oil Filter:*
Apply a small amount of new oil to the gasket of the new oil filter to ensure a good seal.
Screw the new oil filter onto the mount by hand. Tighten it securely, but do not over-tighten.
5. *Add New Engine Oil:*
Locate the oil fill cap, usually on the top of the engine.
Remove the cap and place a funnel in the opening.
Pour the new engine oil into the engine, being careful not to overfill. Check your motorcycle manual for the correct oil capacity.
Replace the oil fill cap securely.
6. *Check the Oil Level:*
Start the engine and let it run for a few minutes to circulate the new oil.
Turn off the engine and wait a few minutes for the oil to settle.
Check the oil level using the dipstick or sight glass and add more oil if necessary to reach the correct level.
7. *Clean Up and Dispose of Old Oil:*
Wipe any spilled oil from the engine and surrounding areas.
Dispose of the old oil and oil filter properly by taking them to a recycling center or an auto parts store that accepts used oil.
*Regular Maintenance Schedule:*
Consult your motorcycle’s manual for the recommended oil change intervals, which typically range from 3,000 to 5,000 miles (4,800 to 8,000 kilometers) or every 6 months, whichever comes first.
Keeping track of your oil change schedule helps ensure your motorcycle runs smoothly and extends the life of your engine.
#motorcyclemaintenance #doityourown #engineservice #yamahafzsv3 #oilchange #oilfilterchange #rangorevz
_______________
RANGO_REVZ
Instagram link :-
...
Facebook page :-
www.facebook.c...
THANKS FOR WATCHING
💚👽💚 - ยานยนต์และพาหนะ
👍🏼👍🏼👍🏼
@@BKB-r4e 🥰
☝🏼🤞🏼🫵🏼
@@WalkthroughManias ✌🏼😉