Since I am often asked which woods I have used: Beech for the sole Walnut from Germany for the body Plum for the wedge and elm for the handle. Da ich doch häufiger gefragt werde welche Hölzer ich verwendet habe: Buche für die Sohle Walnuss aus Deutschland für den Körper Pflaume für den Keil und Rüster für den Griff.
Thanks to you ;) I can explain them to you. Firstly, all types of wood are hardwood so that they can withstand the loads. The sole of the plane is made of beech wood because this is a very short-grained type of wood. So in the worst case only one corner would break off instead of splintering and tearing away long fibres of the sole. The body of the plane is made of long-grain wood (walnut) because this wood warps less and is more dimensionally stable. The plum wood wedge is very hard and therefore holds the blade optimally. And the elm wood handle just looks beautiful ;) I hope I was able to help.
Superbe rabot, mention spéciale pour la poignée, qui apparament t'a demandé pas mal de temps. Bravo également pour la qualité des images. Cordialement, Hervé.
A spokeshave would make your life easier at the 20 min. mark. Beautiful plane, and I picked up some useful construction details for my next plane! Thanks, and well done sir.
You're right, that's a good tip. Unfortunately I only have one with a straight sole, one with a curved one is still on my list. Glad I could entertain, thanks to you.
Thank you for naming the woods used - I'm one of the curious! That is a plane to be proud of: all the hours it took to make it you will remember each time you use it.
@@marchornig670 There is one sharpening system, and their tag line is "A dull chisel is just a screw driver." I liked that.... Mostly I am on the wood lathe, but getting back into flat work. I do want to make a couple of planes....
Verrrrry nice jointer plane, and extremely original. You have managed to mix several different worlds and methods. I actually would have quite a few comments to make, but I won't. You've done a wonderful job and the plane has come out absolutely beautiful. I am not 100% sure about the three piece method. Of course it makes cutting the plane bed much simpler. Also, the pivoting wedge block pinned into the sides (??? 🧐). Okay on a smoother plane, but it doesn't apply all-round pressure like the traditional slotted wedges. However, looking at it performing the first time is pretty convincing. I would have glued that knocker bolt in the front with epoxy, because it's going to pop out one day. Sorry, I said I wouldn't make comments, but I did. I know everybody loves compliments only, but I'm an old boy with a little bit of experience, and I believe that discussions can advance more than simple compliments (which you deserve here). Greetings from France
@@musamor75 Thank you very much for your words. Objective and constructive criticism (like yours) is always helpful. I had initially thought about gluing the bolt in at the front, but then I thought that if it should really come to meet me at some point, I could always do it later. So far at least it is still holding very well. I consider the method of making the plane from 3 parts to be the simpler one, but will of course also want to make some from one piece in the future. As it should be :) Greetings Marc
Extremely underrated masterpiece here, very well done, no comments needed on the craftsmenship. Huge amount of raw footage and very high quality editing also, that music and timing of it, so good man...
Danke für die netten Worte. Ja find ich cool wenn mein Video dazu inspiriert selbst was zu bauen. Ist such garnicht so schwer, geht auch mit wenig Werkzeug und macht vor allem Spaß. Halt mich auf dem laufenden, würde deine Version gerne sehen wenn es dazu kommt ;)
Awesome video, and awesome work... but please level the sound. Those saws come in like a screaming banshee out of nowhere! I see it... or hear it all the time among TH-camrs, you are not the only one. I appreciate your effort in sharing this with us more than anything, keep up the great work!
Really that bad? I've already made an effort with the sound. Have a look at my last video, I think it's better there. I know exactly what you mean, I can only watch a lot of videos on YT with the remote control in my hand. I thought I had done better. It's not easy as I don't put music under the work itself. When the sound jumps to almost inaudible at these points, it also seems strange. I'll see how I can do it better, thanks. Greetings Marc
@@marchornig670 Thanks for understanding, I didn't mean to sound super critical. I know nothing about how it works, and it must be hard to do because sooo many videos are like that. You're doing awesome. Thank you!
I have made a few planes, and I watched this. My takeaways. You only used two dowels for each side alignment. I have been using 4. I think I will try your way next time. Your cross pin, using washers to reinforce the side holes and it was a captive pin once sides glued up. Very nice. That I will be using. I have created ply’s like you for the handle but not on anything this large. Again I will look at that. You method of attaching the handle I have not seen before. I have used a traditional mortise. I like the steel strike button. Never seen the trick with the double sided tape on you sweater, fuzzing it up to make it easier to remove. That I will remember cool hack! Bottom line is how it cut curls, very nice looked like you where having a lot of fun, and that is the point!
Very detailed comment, very cool. Find it great if my video can inspire here and there, I myself also find inspiration here on YT. Has really made fun and use the plane since the daily. Really become a super tool.
Respekt! Da schau ich ein Video bei Bernd, sehe deinen Kommentar und dachte mir so: "Ok, schaust mal, ob er auch Videos macht". Ich habe es nicht bereut 👍 Die Raubank sieht nicht nur rattenscharf aus, sie scheint auch richtig gut zu sein. Toll gemacht. So gerne ich das auch machen würde.. ich bin einfach nicht so geduldig 😅 Übrigens - die Idee, den Griff mittels Schleifpapier so perfekt auf den Hobelkörper anzupassen, fand ich genial!
Sehr netter Kommentar, danke für die Blumen :) Hab kürzlich erst angefangen mit den Videos, sollen aber noch mehr werden. Ich bin auch immer noch verliebt in meine Raubank. Kann garnicht glauben das ich die gemacht habe ^^ Dann fang doch erst einmal mit einem kleineren Hobel an, vielleicht im Japanischen Style? Dann hast du doch relativ schnell ein Erfolgserlebnis. Eisen dazu gibt es in jedem gut sortierten Online Shop.
@@marchornig670 Ich hab mir einen bestellt und bin zu blöd, das Eisen vernünftig anzupassen 😜 Ist ja nicht so, dass es genügend Videos oder Blogbeiträge gibt... Aber genau aus diesem Grund habe ich großen Respekt vor Menschen, die da mit Herzblut und Geduld an die Sache herangehen und dann auch durchziehen. Viel Erfolg beim Bau des nächsten Hobels. Ich schau es mir an, wenn das Video kommt 👍👍
“One plane to rule them all”! AMAZING! One of the most fascinating and interesting things I’ve seen in a long time! Pure craftsmanship! That handle alone is just an absolute masterpiece! And the plane is truly amazing! I swear it looked like the shavings were floating on helium! Bravo!
Oh my goodness, I'm blushing :) Thank you so much for your really nice comment. Sometimes I can hardly believe that I built it myself. There are beautiful things inside all of us, we just have to let them out. Have a nice day ;)
Hi there! I’m an hobby woodworker and I want to be able to do it professionally in the future. Currently I’m still in school and I only work in my garage and I must ask a few questions; Is there any tips you’d like to pass on? What tools did you purchase/make that were a game changer? What are some mistakes that I should avoid making? Beautiful work by the way! Absolutely gorgeous! Keep posting! I love to see what others make.
Hey WrightToolWorks! First of all, thank you very much for your kind words. I have to admit that I only work with wood as a hobby myself. Quite intensive but I haven't officially learnt it. Everything I know I taught myself or learnt from other TH-cam videos. If you plan to work a lot with solid wood, the most important tool is probably the planer, then the saw. Circular table saw, band saw, plunge saw, handsaw. Each of these has its own advantages and strengths. But you should learn how to plane, because you can only build crooked furniture with crooked wood. My advice would be to try out as much as you can yourself, make attempts and don't just rely on what others say. Even end grain gluing can hold sufficiently in certain situations, even if everyone says it doesn't. Just as an example :) I always say "whatever works is allowed and try to keep it simple". I wish you much joy in your future profession. I hope you find a job that allows you to try yourself out. Greetings Marc
That is some lovely wood. And minimal use of tools, much of it done by hand. I didn't see a measuring tape once :) I have to admit that up until the 30 minute mark or so I had no idea what he was building 🤣
I like your work looks good. I think you have been better served by setting the handle into the body by mortise & tenon. That is the classic form in attaching a tote/handle but they become classic because they work. Nonetheless, great job, nothing like using a wooden plane. Enjoy
Hey Billy, you're right. Mortise and tenon would have been the first choice here, but I didn't really trust myself to do that with curved parts. Maybe next time ;) Thanks a lot for your comment!
@@marchornig670 you can cut your joinery before cutting your curves and then take advantage of flat faces... I though the same about mortising the handle... Beautiful plane nonetheless!
@@jimford9187 Thank you very much, Jimford! Always great to hear. The finger is doing well again. What's a project without a bit of blood/sweat and tears :D
Muy grato ver un trabajo realizado con las manos, una entera satisfacción en toda la extensión de la palabra un arte como ninguno gracias por compartir saludos
Originally, this was also my plan, but when I had the rear handle mounted, I realized how much control I already have. I also think that a front knob would disturb the optics somewhat, which would not be a problem if necessary. First and foremost, it must work well, then it may look good. Finally, I thought, a knob I can still make later and attach if I change my mind, so I have omitted it for now.
Unfortunately not, as I was only sure of the total length in advance. But if you like, I can measure a few things for you tomorrow. But it won't be a complete technical drawing.
Do over, who absorbs your cost for all the products you use in the making process as well as the time that you spend on working out the layouts for the tables. By the way, I love your work. Cheers Bob.
Increíble trabajo,una precisión increíble en cada uno de los detalles,un trabajo fuera de serie, ojalá algún día yo lo pueda hacer con esos detalles y esa exactitud
Estoy seguro de ello. Como alguien dijo muy bien aquí, "La buena artesanía es un estado de ánimo", lo que significa: si quieres conseguir algo, lo conseguirás tarde o temprano. Y muchas gracias ;)
Since I am often asked which woods I have used:
Beech for the sole
Walnut from Germany for the body
Plum for the wedge
and elm for the handle.
Da ich doch häufiger gefragt werde welche Hölzer ich verwendet habe:
Buche für die Sohle
Walnuss aus Deutschland für den Körper
Pflaume für den Keil
und Rüster für den Griff.
Ich wette, du hast auch Dictum unter deinen Lesezeichen im Browser 😂 stabile Arbeit
@@Ali-0101 Aber selbst verständlich ^^
You and Stavros are my woodworking heroes
Phew, I'm really honoured by that.
Stravos makes really beautiful and also very expensive planes.
Thank you very much ;)
Yes - you so speak the truth!
@@marchornig670 Your attention to detail will yield great and beautiful results.
What a beautiful tool
Thanks ;)
This is not carpentry, this is artistry. Very satisfying work. I am so thankful to you sir for uploading this wonderful video. Best regards
That is probably the nicest compliment I have received so far ;)
Thank you very much for your kind words!
Magnificent workmanship. The wood choices made the jointer plane a thing beaty. Well done!!
Thank you :)
Beautiful!
Thank you!
Beautifully done. I wish I understood the significance of the different wood types for the different parts.
Thanks to you ;)
I can explain them to you. Firstly, all types of wood are hardwood so that they can withstand the loads. The sole of the plane is made of beech wood because this is a very short-grained type of wood. So in the worst case only one corner would break off instead of splintering and tearing away long fibres of the sole.
The body of the plane is made of long-grain wood (walnut) because this wood warps less and is more dimensionally stable.
The plum wood wedge is very hard and therefore holds the blade optimally.
And the elm wood handle just looks beautiful ;)
I hope I was able to help.
Beautiful work ..... one to be enjoyed for generations!
Thank you very much, too much of an honour ;)
Nếu tôi có một cái bào đẹp thế này chắc tôi không dám dùng vì nó quá đẹp
Có thể trên thế giới này không có cái bào nào đẹp tốt và đắt giá như cái bào này, một tác phẩm kỹ thuật và mỹ thuật tuyệt đỉnh
Tôi cũng là thợ mộc mà phải hết vía với cái bào này
Tolles Video - und toller Hobel, danke!
Toller Kommentar, danke auch ;)
I'm impressed very beautiful job, the shape, the handle, it fantastic! Very good job man!!
Thanks ;)
Beautiful job. Thanks for uploading.
Thanks
@@marchornig670 You are more than welcome.
Superbe rabot, mention spéciale pour la poignée, qui apparament t'a demandé pas mal de temps. Bravo également pour la qualité des images.
Cordialement, Hervé.
Merci beaucoup pour tes gentils mots. Cela me fait plaisir.
I am totally impressed!!!!
Nice of you, thanks ;)
Und Zack ist der Marc ein TH-cam-Star. Sehr sehr schön gemacht 👍👍👍👍
Hahaha, ich glaube ganz so schnell geht das nicht.
Aber vielen dank für dein Kompliment! Bedeutet mir viel.
Es braucht keine Worte nur die Wärme und den Klang des Holzes oder auch Metalls. WUNDERSCHÖN
Danke schön ;)
A spokeshave would make your life easier at the 20 min. mark. Beautiful plane, and I picked up some useful construction details for my next plane! Thanks, and well done sir.
You're right, that's a good tip. Unfortunately I only have one with a straight sole, one with a curved one is still on my list. Glad I could entertain, thanks to you.
The silhouette in the sunset sold it. Well done.
Thank you very much
Dear Marc, beautiful job.
Thanks!
Gorgeous, beautiful, amazing workmanship
Very nice of you, thank you
Thank you for naming the woods used - I'm one of the curious! That is a plane to be proud of: all the hours it took to make it you will remember each time you use it.
True words. Thanks to you
Thus far in my wood shop years, I have had far more cuts from my sharp edges on my boards than from my tools! Hope it stays that way! Nice piece.
In Germany we say: "the sharper a tool, the lower the risk of injury". Sounds like you always keep everything well sharpened.
Thank you.
@@marchornig670 There is one sharpening system, and their tag line is "A dull chisel is just a screw driver." I liked that.... Mostly I am on the wood lathe, but getting back into flat work. I do want to make a couple of planes....
Beautiful. Fantastic job.
Thanks!
Verrrrry nice jointer plane, and extremely original. You have managed to mix several different worlds and methods.
I actually would have quite a few comments to make, but I won't. You've done a wonderful job and the plane has come out absolutely beautiful.
I am not 100% sure about the three piece method. Of course it makes cutting the plane bed much simpler. Also, the pivoting wedge block pinned into the sides (??? 🧐). Okay on a smoother plane, but it doesn't apply all-round pressure like the traditional slotted wedges.
However, looking at it performing the first time is pretty convincing. I would have glued that knocker bolt in the front with epoxy, because it's going to pop out one day.
Sorry, I said I wouldn't make comments, but I did. I know everybody loves compliments only, but I'm an old boy with a little bit of experience, and I believe that discussions can advance more than simple compliments (which you deserve here).
Greetings from France
@@musamor75 Thank you very much for your words.
Objective and constructive criticism (like yours) is always helpful.
I had initially thought about gluing the bolt in at the front, but then I thought that if it should really come to meet me at some point, I could always do it later. So far at least it is still holding very well.
I consider the method of making the plane from 3 parts to be the simpler one, but will of course also want to make some from one piece in the future. As it should be :)
Greetings Marc
Werkzeug für die Ewigkeit. Mega gemacht! Lg
Danke schön.
Beautiful, thanks for that. A tool that ought to be handed down through the generations. A real family heirloom. But should be used too.
Very nice compliment. Many thanks for that.
Eine hervorragende Handwerkliche Arbeit , Respekt
Vielen Dank!
Absolutely beautiful build
It's great that so many people like it. Thank you.
Extremely underrated masterpiece here, very well done, no comments needed on the craftsmenship.
Huge amount of raw footage and very high quality editing also, that music and timing of it, so good man...
Strong compliment, thank you very much for that!
Very, very well done. The sanding of the bottom of the handle to the shape of the plane body was a brilliant idea. 👍👍👍
Thank you ;)
The music you used is as beautiful as the woodwork. Wonderful!! 👏👏👏👍👍
I'm glad you like it. Thank you.
Wunderschönes Teil, bin gerade am überlegen, mir keine alte herzurichten sondern auch so eine zu bauen. Mein höchster Respekt vot deinem Können!
Danke für die netten Worte.
Ja find ich cool wenn mein Video dazu inspiriert selbst was zu bauen. Ist such garnicht so schwer, geht auch mit wenig Werkzeug und macht vor allem Spaß.
Halt mich auf dem laufenden, würde deine Version gerne sehen wenn es dazu kommt ;)
Ich bin in Rente.
Ich habe keine Werkzeuge oder Maschinen mehr!
Aber gute Arbeit ist eine Geisteshaltung... Michel VIDAL
Gorgeous work! And pretty darn good calculations as well; 42 is the ultimate answer. Thanks for sharing
Yes, you can't go wrong with the 42 ;)
Many thanks for the kind words!
I found the 'My Mechanics' of carpentry at last! If ever someone earned a sub, it's this guy.
Very nice comment, thanks to you ;)
Awesome video, and awesome work... but please level the sound. Those saws come in like a screaming banshee out of nowhere! I see it... or hear it all the time among TH-camrs, you are not the only one. I appreciate your effort in sharing this with us more than anything, keep up the great work!
Really that bad? I've already made an effort with the sound. Have a look at my last video, I think it's better there. I know exactly what you mean, I can only watch a lot of videos on YT with the remote control in my hand.
I thought I had done better.
It's not easy as I don't put music under the work itself. When the sound jumps to almost inaudible at these points, it also seems strange.
I'll see how I can do it better, thanks.
Greetings Marc
@@marchornig670 Thanks for understanding, I didn't mean to sound super critical. I know nothing about how it works, and it must be hard to do because sooo many videos are like that. You're doing awesome. Thank you!
Чистый восторг. Браво!
Очень любезно с вашей стороны, спасибо!
Richtig cooler Hobel. Tolle Arbeit!
Danke schön ;)
Nett von dir.
Amazing work. I was enthralled while watching the entire video!
Thank you very much, that's really nice of you.
Absolutley stunning!! Wood is gorgeous! Fine work sir!
Thanks ;)
Tolle Arbeit!
Vielen dank ;)
Stunning! Beautiful, expertly functional, an heirloom. You must put your maker’s mark and date on it.
Super nice of you, thank you ;)
Satisfied for watching
Amazing work love it
Sehr schön! Auch gut den Krenov-Stil getroffen.
I have made a few planes, and I watched this. My takeaways. You only used two dowels for each side alignment. I have been using 4. I think I will try your way next time. Your cross pin, using washers to reinforce the side holes and it was a captive pin once sides glued up. Very nice. That I will be using. I have created ply’s like you for the handle but not on anything this large. Again I will look at that. You method of attaching the handle I have not seen before. I have used a traditional mortise. I like the steel strike button.
Never seen the trick with the double sided tape on you sweater, fuzzing it up to make it easier to remove. That I will remember cool hack!
Bottom line is how it cut curls, very nice looked like you where having a lot of fun, and that is the point!
Very detailed comment, very cool.
Find it great if my video can inspire here and there, I myself also find inspiration here on YT.
Has really made fun and use the plane since the daily. Really become a super tool.
Really a work of art this tool friend. How pleasant it must be to work with that brush. I really congratulate you. Greetings from Chile
Wow Chile, far away.
Thanks for your compliment ;)
Eine Schönheit ! Spitzenklasse.
Vielen dank!
Respekt! Da schau ich ein Video bei Bernd, sehe deinen Kommentar und dachte mir so: "Ok, schaust mal, ob er auch Videos macht". Ich habe es nicht bereut 👍 Die Raubank sieht nicht nur rattenscharf aus, sie scheint auch richtig gut zu sein. Toll gemacht. So gerne ich das auch machen würde.. ich bin einfach nicht so geduldig 😅 Übrigens - die Idee, den Griff mittels Schleifpapier so perfekt auf den Hobelkörper anzupassen, fand ich genial!
Sehr netter Kommentar, danke für die Blumen :)
Hab kürzlich erst angefangen mit den Videos, sollen aber noch mehr werden. Ich bin auch immer noch verliebt in meine Raubank. Kann garnicht glauben das ich die gemacht habe ^^
Dann fang doch erst einmal mit einem kleineren Hobel an, vielleicht im Japanischen Style? Dann hast du doch relativ schnell ein Erfolgserlebnis. Eisen dazu gibt es in jedem gut sortierten Online Shop.
@@marchornig670 Ich hab mir einen bestellt und bin zu blöd, das Eisen vernünftig anzupassen 😜 Ist ja nicht so, dass es genügend Videos oder Blogbeiträge gibt... Aber genau aus diesem Grund habe ich großen Respekt vor Menschen, die da mit Herzblut und Geduld an die Sache herangehen und dann auch durchziehen. Viel Erfolg beim Bau des nächsten Hobels. Ich schau es mir an, wenn das Video kommt 👍👍
Beautiful job -- and it works perfectly!! Well done.
Thanks ;)
Superb job!!!
Thanks!
Great video
Thank you
Высокое мастерство!
Великолепный инструмент создан!
Браво!❤
Спасибо за добрые слова ;)
Belo trabalho, ainda quero um dia ter habilidade o suficiente para construir minhas próprias plainas manual de madeira.
Parabéns pelo projeto!!!
Muito obrigado ;)
O dia há-de chegar, não te preocupes. Mas não sozinho.
De nada, merece!!!
Sehr shön gemacht!
Dank dir
“One plane to rule them all”! AMAZING! One of the most fascinating and interesting things I’ve seen in a long time! Pure craftsmanship! That handle alone is just an absolute masterpiece! And the plane is truly amazing! I swear it looked like the shavings were floating on helium! Bravo!
Oh my goodness, I'm blushing :)
Thank you so much for your really nice comment.
Sometimes I can hardly believe that I built it myself. There are beautiful things inside all of us, we just have to let them out.
Have a nice day ;)
Отличная работа - приятно смотреть! Улыбнул листочек с формулами - Эйнштейн и не догадывался, насколько универсальна его теория относительности 😸😸😸
Вы действительно можете использовать его везде, хахаха.
Я рада, что вам понравилось, спасибо.
This is artistry and beyond carpentry. I am so grateful that you uploaded this fabulous video. Thank you, Sir!
@@davidatkins6919 Thank you very much for this very flattering comment. I am glad that I was able to entertain you.
Hi there! I’m an hobby woodworker and I want to be able to do it professionally in the future. Currently I’m still in school and I only work in my garage and I must ask a few questions; Is there any tips you’d like to pass on? What tools did you purchase/make that were a game changer? What are some mistakes that I should avoid making? Beautiful work by the way! Absolutely gorgeous! Keep posting! I love to see what others make.
Hey WrightToolWorks!
First of all, thank you very much for your kind words.
I have to admit that I only work with wood as a hobby myself. Quite intensive but I haven't officially learnt it. Everything I know I taught myself or learnt from other TH-cam videos.
If you plan to work a lot with solid wood, the most important tool is probably the planer, then the saw. Circular table saw, band saw, plunge saw, handsaw. Each of these has its own advantages and strengths. But you should learn how to plane, because you can only build crooked furniture with crooked wood.
My advice would be to try out as much as you can yourself, make attempts and don't just rely on what others say. Even end grain gluing can hold sufficiently in certain situations, even if everyone says it doesn't. Just as an example :)
I always say "whatever works is allowed and try to keep it simple".
I wish you much joy in your future profession. I hope you find a job that allows you to try yourself out.
Greetings Marc
Eine sehr schöne Arbeit hast du da gemacht ich bin begeistert !!!
Danke schön.
That is some lovely wood. And minimal use of tools, much of it done by hand. I didn't see a measuring tape once :) I have to admit that up until the 30 minute mark or so I had no idea what he was building 🤣
Haha, vielen dank für deinen netten kommentar ;)
I loved the equations at 6 minutes 😂. Lovely plane as well.
@@Arsenal18862006 Nice that I was able to entertain. And many thanks :)
Top Arbeit.
Dank dir.
Отличный инструмент получился и не менее классное видео о его изготовлении! Операторская работа - 5 баллов!
So good!
Спасибо, приятно слышать.
Excellent job - a beautiful plane!!!
Thank you, that's nice of you.
Very beautiful!
Thank you Robert, nice of you
Beautiful plane. We shared this video on our homemade tools forum this week 😎
Thank you very much, I feel honoured ;)
@@marchornig670 You're very welcome; we really liked this one. Let me know if you build any more homemade tools.
@@homemadetools Danke!
Und mach ich, weitere Werkzeuge werden in zukunft immer mal wieder dabei sein.
@@homemadetools Thank you!
And I will, more tools will be included from time to time in the future.
Una obra de ARTE, FELICITACIONES!!!! SALUDOS DESDE URUGUAY 🇺🇾
Gracias, muy bonito. Saludos desde Alemania ;)
Bravo, Maestro!!
@@genebarfield6688 Grazie mille
Oh hell !!!!! Impressive !!!!!!
Oh, damn !!!!! Thanks ;)
Magnificent!!! Well done.
Thanks!
Großartige Arbeit, meinen absoluten Respekt!
Sehr nett von dir, danke schön ;)
Великолепная работа
Большое спасибо
Outstanding work
Many thanks
I like your work looks good. I think you have been better served by setting the handle into the body by mortise & tenon. That is the classic form in attaching a tote/handle but they become classic because they work. Nonetheless, great job, nothing like using a wooden plane. Enjoy
Hey Billy, you're right. Mortise and tenon would have been the first choice here, but I didn't really trust myself to do that with curved parts. Maybe next time ;)
Thanks a lot for your comment!
@@marchornig670 you can cut your joinery before cutting your curves and then take advantage of flat faces... I though the same about mortising the handle... Beautiful plane nonetheless!
@@TomasRosberg This is a great idea! So simple and yet so good. I will try to remember for the next time, thank you!
Great video. Informative, entertaining, and a joy to watch. Thank you so much. And sorry about your bloodied finger.
@@jimford9187 Thank you very much, Jimford!
Always great to hear.
The finger is doing well again. What's a project without a bit of blood/sweat and tears :D
Very nice. I loved the math page! ;-)
I'm glad, thanks to you.
👍👍 very good work, on par with Young Je!👏
Ha! It would be nice. Young is in a different league.
Thanks for the compliment!
Beautiful job!
Thanks ;)
3:44 - I'm pretty sure that's a cat's tail I see there up in the right hand corner.
A shop-cat :-)
Good man !
She even appears at least once more in this video, and in every other video I've made. Is always working with. Good eyes ;)
Amazing job!!
Very cool!!!
Thank you
Beautiful work!
Thanks!
Sehr schön!
Danke.
Really cool plane!
Thanks ;)
Marc, you do fantastic work! I love making metal working tools. I am looking forward to making hand plane for woodworking in my old age.
Thank you very much, nice of you ;)
Muy grato ver un trabajo realizado con las manos, una entera satisfacción en toda la extensión de la palabra un arte como ninguno gracias por compartir saludos
Gracias por tus amables palabras, Virtor.
A beautiful instrument. I thought you would make a front handle though.
Originally, this was also my plan, but when I had the rear handle mounted, I realized how much control I already have. I also think that a front knob would disturb the optics somewhat, which would not be a problem if necessary. First and foremost, it must work well, then it may look good.
Finally, I thought, a knob I can still make later and attach if I change my mind, so I have omitted it for now.
@@marchornig670 I wondered if that might be the case. It sure does look streamlined.
what a beauty :) well done sir
Thanks
Une merveille.Bravo.
Merci beaucoup
Prima schaaf, mooi van vorm en werkt als een…😊
Bedankt ;)
Nice build! Great tool.
Thank you
K bellesa de trabajo gracias por compartir sus esperiencias
Muchas gracias por su agradable comentario ;)
Hello, do you have construction plans and measurements? thank you.
Unfortunately not, as I was only sure of the total length in advance.
But if you like, I can measure a few things for you tomorrow. But it won't be a complete technical drawing.
Nice! I am getting ready to build a jointer myself and your build gave me some ideas.
Very good, glad to hear that I could inspire ;)
Uma obra de arte. Trabalho magnifico. Parabéns! ❤
Obrigado pelas palavras simpáticas!
Do over, who absorbs your cost for all the products you use in the making process as well as the time that you spend on working out the layouts for the tables. By the way, I love your work.
Cheers Bob.
Thanks to you!
I think most hobbies are not economical.
Très beau travail !👍👍
Merci beaucoup
Фуганок просто песня, очень красивый, имеет функциональность👍👍👍
Большое спасибо
very nice work
Increíble trabajo,una precisión increíble en cada uno de los detalles,un trabajo fuera de serie, ojalá algún día yo lo pueda hacer con esos detalles y esa exactitud
Estoy seguro de ello. Como alguien dijo muy bien aquí, "La buena artesanía es un estado de ánimo", lo que significa: si quieres conseguir algo, lo conseguirás tarde o temprano.
Y muchas gracias ;)
@@marchornig670 gracias mil por contestar tienes un subscriptor más, espero con interés más videos
That’s really good work. Good video, interesting process. How much do you want for the plane?
Hey Toby.
Thanks for your kind words.
More than anyone would be willing to pay ;)
Excellent video. You’re a very skilled craftsman. Really enjoyed watching you make your plane.
From Missouri USA
Thanks for the nice compliment.
Glad if the video could entertain ;)
Work of art.
@@Richard-vw8no Thank you very much