I have a box full of grommets (different sizes) and tools but I didn't know what to do with them. I tried, and it was a big failure. I watched this vid and calmed down. I found what fitted and got success. Thanks.
I got sold in 55 seconds. Literally just added a grommet kit to my Amazon shopping list. It's just this kind of thing you don't think of until you realise how convenient and easy it is to DIY.
@@henryvalero9235 just put a stronger material (but not too thick) on both sides, cut through all the layers, and pound the grommet in. Trim the excess material you don't want. Could also put a dab of glue between material and grommets for a stronger seal.
The one thing you have said over and over lead me to start prepping years ago. "One is none. two is one". So dang true and has been my motto ever since. Thanks
Thank you for explaining the reason behind rotating the hammer! Understanding why something needs to be done makes it far more likely that I'll actually take the time to do it properly!
Good timing on this video. I'm actually going to be heading to Rural King to pick me up a grommet kit. I need to replace one on my Army duffle bag. Thank you
Thanks for step by step easy to instructions on how to install grommets. Forgot after years of not installing it. Ur upload saved me so much time, energy n trial n error to figure it out. Kudos. Newcsubscriber because of this vid. Anticipating other uploads.
Finally, someone that showed me all the steps. When I was putting them in the grommet would not crunch down. I watched four other how to videos with none of them showing the missing step. I come over to a gun channel and you showed it. Thanks.
Great video. Clear information and demonstration. Easy, steady pace to learn by. I only wish it wasn't just for "guys" ( ya know??); I'm a gal and we like to use grommets too!!
Nothing beats a good sewing/patch repair kit and a handful of grommets with a ball peen hammer LOL. I like it. I think grommets should be added to the shortlist of useful items along side duct tape and para cord.
Right. The smaller grommets use a tool, that looks like a pair of pliers or a hole punch, and the larger ones use the tool you use with a hammer, unless you get the special grommet press. I've uased the hammer-tool on leather projects.
Not only did I like your demo on grommets, but I LOVED what you had to say at the end. That tells me you're a pretty durn good guy. ;-) Keep up the good work.
Hi... Use a self healing cutting mat 5×5 as a base instead of cardboard. Thank you for the detailed instructions..I was putting the washer on backwards. Thanks again
Cool deal, another idea would be to use a lighter for example, after making the holes and burn the ends of some material before installing the grommets; I think that would even secure them more:)
OMG, my heart literally stopped 'beating for couple of seconds', I had to double check and to my relief sootch00 is still there !!!!! man you and hickok45 are my heroes 4ever,,,, great job on gromets work as well,,,,,,
Thank you very much from England for this vid, just what I was looking for. Btw, has anyone told you that you look like a young Gene Hackman, just to let you know that's good, I love that man, especially in the French Connection!
Good info to know. I have seen more technical methods of installing grommets but this will fit in your bag easily for a tarp repair or to make more points of attachment to make a better tarp.
I've been looking on Amazon for a grommet kit. However I'm hesitant to trust most tools on amazon with random, usually chinese, brand names. Most review channels on TH-cam I've learned not to trust as well. They just repeat what the top search results are. Imagine my surprise when your face pops up in my TH-cam search! Lol I've come to trust your gun reviews on your other channel. I was unaware you had another channel. Anyways when I saw your face I thought "Sootch!! Finally a review worth listening to!" Thank you for all the information you put out into the word for us to learn from.
Don I still think you should do a video of nothing but your Bloopers. In this day and age we all need a good laugh And I really enjoy your Bloopers at the end of a video Thanks good Info
You can use this method for collecting rain water in survival situations, using a tarp and make 4 grommets in it and you can hang it on a tree or makeshift hangers. You should add grommets in your survival kits.
possibly, but it wouldnt work nearly as well as a regular tool. if you mean in place of the hammer and the tool, i wouldnt reccomend it because it would likely just mess up your grommet. in place of the hammer, sure, but it might slip and if it has any sharp edges, slice your thumb
If you need a hammer for it in your pack i will advise a steel advengers thor keychain. Not verry heavy and you can even hammer some small nails. Will take you a while to hammer the big stuff tho.
You are a fucking gangster!!! this video was incredibly helpful. We were trying to add some gromets to a sound blanket at the Planned Parenthood chapter that I run and the other videos were just trash. Thank you for this info. The twisting technique is incredibly helpful. I kept having uneven mushrooming before I saw this.
Which side is the best for the front side of the towel or tarp, would have liked to know that, I know guys don't typically care about front or back. Lol!
Hi, What I need to know is How is the sizing of the grommet measured? Is it the size of the internal hole after it is fitted? I have asked around and looked on ebay but cant find the answer. Thanks Jim in NZ.
😁using tactical black grommets to keep that orange cloth from giving away your position.
I have a box full of grommets (different sizes) and tools but I didn't know what to do with them. I tried, and it was a big failure. I watched this vid and calmed down. I found what fitted and got success. Thanks.
I got sold in 55 seconds. Literally just added a grommet kit to my Amazon shopping list. It's just this kind of thing you don't think of until you realise how convenient and easy it is to DIY.
Just make sure your material can stand the tugging it might get, like on a fly tarp. You might need to add some reinforcing panel(s).
@@toml.8210 From Lil Giant Ok. I give. How do you apply reinforcement?
@@henryvalero9235 just put a stronger material (but not too thick) on both sides, cut through all the layers, and pound the grommet in. Trim the excess material you don't want.
Could also put a dab of glue between material and grommets for a stronger seal.
The one thing you have said over and over lead me to start prepping years ago. "One is none. two is one". So dang true and has been my motto ever since. Thanks
It applies just about everywhere. In the mechanic field, you almost always have backup tools. Especially, ratchets.
@@scarling9367 Copy that from a airline mechanic
You just need to be careful how much redundancy you have, or you get overloaded or go broke.
Stuff like this is my #1 leather repair. Snaps specifically.
Thank you so much! Very clear instruction.
God Bless America! Long live the republic and religious freedom.
This guy gave the best advise on how to get a nice clean closer on the grommet. And showed which side was up on the back part of grommet.
Thank you for explaining the reason behind rotating the hammer! Understanding why something needs to be done makes it far more likely that I'll actually take the time to do it properly!
Best video on grommet installation I've seen so far. Close ups are great and very detailed. Thanks.
Very good teaching video. I just bought a grommet kit to make a underquilt for my hammock.
Good timing on this video. I'm actually going to be heading to Rural King to pick me up a grommet kit. I need to replace one on my Army duffle bag. Thank you
Thanks for the tip on rotating the flare tool, I had issues with a smooth melding and now I know why
This was a big help to me. Using cardboard instead of the wood block is great advice.
Make sure you use the right caliber to punch the g hole... I prefer the .44 WAD CUTTER
Thanks for step by step easy to instructions on how to install grommets. Forgot after years of not installing it. Ur upload saved me so much time, energy n trial n error to figure it out. Kudos. Newcsubscriber because of this vid. Anticipating other uploads.
Finally, someone that showed me all the steps. When I was putting them in the grommet would not crunch down. I watched four other how to videos with none of them showing the missing step. I come over to a gun channel and you showed it. Thanks.
Never knew about this. Thanks Don, and watch that left thumb nail. It is looking good, you had me nervous with the grommet hammer!
For remote life I have hundreds of different sizes of grommets and rivets. I always double the fabric being fastened. It holds better and tears less.
Great video. Clear information and demonstration. Easy, steady pace to learn by. I only wish it wasn't just for "guys" ( ya know??); I'm a gal and we like to use grommets too!!
Nothing beats a good sewing/patch repair kit and a handful of grommets with a ball peen hammer LOL. I like it. I think grommets should be added to the shortlist of useful items along side duct tape and para cord.
Right. The smaller grommets use a tool, that looks like a pair of pliers or a hole punch, and the larger ones use the tool you use with a hammer, unless you get the special grommet press.
I've uased the hammer-tool on leather projects.
Never used these but have just bought a pack of grommets and this video helps me a lot!👍👍👍
Not only did I like your demo on grommets, but I LOVED what you had to say at the end. That tells me you're a pretty durn good guy. ;-) Keep up the good work.
Finally someone with some knowledge and all the important info we need ❤️
Thank you so much!
Loved your video
5 seconds in and i like this guy already.
Best instructions over all with extra important tips. Thanks
This is actually really useful. Didn't know how common grommets were (even if they've been there all along). Thanks a lot: )
Thank you. Very interesting.
You can buy a kit at Walmart, Hobby Lobby and Michael's crafts.
thank you sootchoo for the awesome video!!! that was a great idea sootchoo. the grommet is a good idea. thanks!!
Hi... Use a self healing cutting mat 5×5 as a base instead of cardboard. Thank you for the detailed instructions..I was putting the washer on backwards. Thanks again
I've always wondered about how to do these. Thank you!
Cool deal, another idea would be to use a lighter for example, after making the holes and burn the ends of some material before installing the grommets; I think that would even secure them more:)
Thank you for doing this video. Its extremely ironic because while I was at work today this is something I was wondering about.
Very informative, helpful,well spoken, and clear cut.
OMG, my heart literally stopped 'beating for couple of seconds', I had to double check and to my relief sootch00 is still there !!!!! man you and hickok45 are my heroes 4ever,,,,
great job on gromets work as well,,,,,,
Thanks for showing how that's done, always wanted to know. Going to get me a kit. And love the bloopers at the end. 👍❤️
Thank you very much from England for this vid, just what I was looking for. Btw, has anyone told you that you look like a young Gene Hackman, just to let you know that's good, I love that man, especially in the French Connection!
Good info to know. I have seen more technical methods of installing grommets but this will fit in your bag easily for a tarp repair or to make more points of attachment to make a better tarp.
Snaps work the same way and are also very useful.
Exceptionally helpful! Short and informative!
You're a genius sir, Thank You. I didn't even think of grommets !
Great video on something not thought of to be of simple, but very useful! As always, keep walking with the KING!
Thanks… I’m lookin to put a few grommets in gear I use for padding. Easy drainage on the water.👍😁🇺🇸
I've been looking on Amazon for a grommet kit. However I'm hesitant to trust most tools on amazon with random, usually chinese, brand names. Most review channels on TH-cam I've learned not to trust as well. They just repeat what the top search results are.
Imagine my surprise when your face pops up in my TH-cam search! Lol I've come to trust your gun reviews on your other channel. I was unaware you had another channel.
Anyways when I saw your face I thought "Sootch!! Finally a review worth listening to!" Thank you for all the information you put out into the word for us to learn from.
Great tip! 👍
Thank you, you make it look foolproof.
Don I still think you should do a video of nothing but your Bloopers. In this day and age we all need a good laugh And I really enjoy your Bloopers at the end of a video Thanks good Info
Wow this is a really great video, I enjoyed that you pointed out different examples and even hammered through different types of materials
As always great info. Thanks 👍🏼
How about video on building Faraday cages or boxes. A friend has some solar generator which I'm sure would be affected by a CME or EMP. Thanks.
Great, well informed video, Don! As always! Thank you!
Handy kit , thanks for sharing, God bless !
Thanks a lot for the videos. Very informative and very well put together.
Good idea... Thanks
You can use this method for collecting rain water in survival situations, using a tarp and make 4 grommets in it and you can hang it on a tree or makeshift hangers.
You should add grommets in your survival kits.
Thanks, Don. Very practical and useful.
You could possibly use a large rock to hammer the grommet?
possibly, but it wouldnt work nearly as well as a regular tool. if you mean in place of the hammer and the tool, i wouldnt reccomend it because it would likely just mess up your grommet. in place of the hammer, sure, but it might slip and if it has any sharp edges, slice your thumb
Love your vids, very helpful!!
Best video ever. Thank you 😊
Love your ending!
I am glad I found this video.
Great video. God bless America
Thanks Again For Streaming Your Life Here On TH-cam
Good info! Thank you for the video.
If you need a hammer for it in your pack i will advise a steel advengers thor keychain. Not verry heavy and you can even hammer some small nails. Will take you a while to hammer the big stuff tho.
Does that Gromit come with a Wallace? LOL.
Great video. These are good tools to have.
Good stuff very informative thank you.
Thank you so much .
Bast to use a leather Maul its heavier and well not mess up the setting tools
Thank you & great TH-cam. How do you tell which kit is made in America?
Good tip!
You are a fucking gangster!!! this video was incredibly helpful. We were trying to add some gromets to a sound blanket at the Planned Parenthood chapter that I run and the other videos were just trash. Thank you for this info. The twisting technique is incredibly helpful. I kept having uneven mushrooming before I saw this.
Good looks
Will the hole cutter cut through kevlar? I need a grommet in some kevlar lined gloves. If not, any ideas?
Hi Sootch when is sportsman’s guide going to restart shipping back to Australia they used to
I used hard wood to cut the hole on and it bent the cutter edge in so it doesn't cut. Is there any fix?
Which side is the best for the front side of the towel or tarp, would have liked to know that, I know guys don't typically care about front or back. Lol!
Thanks!
Poly mallets do not mushrooms the metal, and cause fewer noise headaches.
I love grommets
Intresting... Will this work on leather such as boot or wallet type full grain cow hide
I can't find any directions on the use of the Quickclipro setter tool, which has a U-shaped guide. Are these things junk? Did I waster $39?
How does rotating the punch alter anything?
Use a hole cutter that fits in a drill buy on line
Can u use a rubber mallett instead of reg hammer and add gorilla tape fir reinforcement or is that overkill?
Hi, What I need to know is How is the sizing of the grommet measured? Is it the size of the internal hole after it is fitted? I have asked around and looked on ebay but cant find the answer. Thanks Jim in NZ.
Thanks god bless
Would it make more sense to rotate the little anvil piece or the whole grommet/item?
Hahahahahahah! Amazing outtakes!
The black grommet looks more *tactical* for a WROL scenario.
A rock is nature's hammer.
Dollar store survival kit?
wallace and grommet
Now I want to grommet things
I just use my 👊 to 🔨 the grommet.
Cool
LMAO 🤣😂
.. totally shocked when I googled how too and your faced popped up on this video... How many channels ya got? Guns, prep and what else's ?
Grommet!!
💗
I put grommets on my caving boots, makes them last many more trips
Get a real hammer, stop tapping it and HIT it