Creating 3D gear in AutoCAD
ฝัง
- เผยแพร่เมื่อ 22 ส.ค. 2024
- Download the eBook with a fully dimensioned drawing of this video and 80+ more drawings here sourcecad.com/...
Autocad tutorial for modelling gear step by step in detail with clear instructions.
![เบิ้ล ปทุมราช - สาวสอง ( มีมี่ของอ้าย ) ft. ตาต้า,ต้องเต [OFFICIAL MV]](http://i.ytimg.com/vi/mqlMjnP08XI/mqdefault.jpg)
Download the eBook with a fully dimensioned drawing of this video and 80+ more drawings here sourcecad.com/autocad-practice-drawings-with-pdf-ebook/
I am watching this in 2023, thanks a lot sir ❤
Many thanks! I'm a beginner and was able to complete in about 40 minutes (had to go back and fix 3 pt arcs which I snapped to the wrong point early on), despite it being my first ever 3-D object in AutoCAD.
Congrats on your first 3d model, keep learning and thanks for subscribing
Awesome! Cant wait for the improved audio!
Thank You for your Tutorial. It Helps me studying AutoCad.
This is a good tutorial I am something of a AutoCAD newbie but found it reasonably easy to follow, Up until the point of using the fillet function where I seem to be stuck with "cannot fillet between these two entities". For some reason I have followed your tutorial step by step and keep hitting this error.
Craig Fox thanks Craig for your support, In this case you can use two methods
1. press Ctrl+A >> X >> press enter and then apply fillet
or
2. reduce radius of fillet
very helpful. pls continue making useful videos.
thank you from philippines!
putocheeze Welcome :)
Thanks SourceCAD.I appreciate your tutorial.
Temitope Ogunji Welcome Temitope :)
While this could be a decent tutorial, I feel it is missing a lot. For instance, why are the construction lines spaced how they are, why are the circles the sizes that they are? It's all fine when replicating the gear you made in the video for say, the 1% of cases that will require a gear of these exact dimensions, however this tutorial will provide no use in designing your own gear when you need to apply it to your own drawings. For future reference, there needs to be more detailed explanation as to what all the different parts of the entire process actually do.
Nice design..... And simple procedure...!
Your videos are good, but damn, your microphone is really off putting.
It's really comprehensive and helped .
Thanks MTB Task Support
2017! Still great videos. Will keep watching more. I second also, for a bit more mathematical explanations as tangent distance. Please keep them coming :) :)
A very nice explanation, please can you please do a tutorial on the calculation...?
nice video . Brought back the memories of my AutoCAD class 15 yrs ago. But pls work on ur video and would like if u re- update some videos with good audio as well. Good job bro
richard agochi I am glad you enjoyed my videos, and thanks Richard for your suggestions I will certainly work on it and I will try to include new enhanced videos to SourceCAD
it's so good introduction about 3D gear drawing in autoCAD
i like it.
Thank you for your good explanation
Very helpful!
brother it was amazing and helpful :) .. Thank you :)
abu saleh Abir Welcome Abu Saleh, I am glad you enjoyed my videos :)
Good job
Full gracias......you´re the best....
great works. keep sharing
Hi, do you know the possible reason as to why the poly lines are not joined like 6:55? Thus I can't do the fillet.
thnkx alot really helped out me
wonderful
Very good
Hello, excellent video by the way. I'm looking forward to a tutorial for making crown gears. Can you help? Thanks
bhao esko jab mai -0.5 per persspull krtaa hu to yee + me jataa h ptaa nhi kyo orr yee fillet bhii nhi ho rhaa h bataoo bhaii kya problem h 2014 ka version h
sir please help me to filter command
when i select one line it is selected properly but when we put the curser on other line which we want to filter it show that these two lines does not filter
HI THERE , THANK YOU FOR THE TUTORIAL , ITS VERY HELPFUL , THE ONLY THING I AM HAVING TROUBLE RIGHT NOW IS THAT WHEN I TRY TO JOIN THE OBJECT AFTER EXPLODING IT .... ANY IDEA WHAT COULD I BE DOING WRONG AT THIS POINT /? THANKS IN ADVANCE
Knoxville Anyce Thanks Knoxville,
There might be some small gaps which you need to check manually and fill them using line or spline.
nice please share more work different commend
i tried to join my pieces but it just says that 0 objects were joined.
do you know the cause of that?
Excuse me Sir,just look at the scene of 6:41,how do you join all the separate polylines?would you like to explain the steps slowly?what keys I have to press.thanks
such a very helpfull for me......thanx
pradip patil Welcome pradip :)
Hi! First of all I just want to say that your videos are amazing! I'm a beginner in AutoCAD and I've always had trouble picking it up but your videos are so easy to follow.
I'm just having some problems when it comes to using fillet. There are two corners that will not let me use the fillet command. When I try to select the edges it just creates an arc and some weird lines. I don't know what I'm doing wrong.
try exploding the geometry and then make Fillets
i amnot able to join the object before doing fillet. why??? help me
why is it needed to remove sharp edges from inside
good guide
Thanks Naveed
Very helpful tuto thnks....
Welcome Pawan
Bhai pressure angles , adendum , dedendum , involute he ya epicyclic , tooth width tooth thickness ye Sab isMe Kese decide or apply kiya ye To Bta. Plz. Reply karna.
How to start the drafting and annotation setting
Very Nice Tuto....
Thanks
If Solid works is a Mercedes that is an ox cart... btw why filet the edges after array and not before?
I agree with you Miteltrixel but each software serves its specific purpose and AutoCAD is specifically made for 2D drawings yet it sometimes can be used for 3D modelling as well so it wont be fair to call it inferior than other softwares, and yes fillet can be made before array but that would have confused novice autocad user about selecting entities for array.
Your videos are extremely good. my friend can you suggest me one way to digitalize engines gaskets shapesinto autocad? i mean: i use to scan the shaper of the gasket, then insert OLE objetc and then using as " carbon paper" i design with autocad followring the profiles. but due to scanner the image is not sharp and result not perfect. ineed tolerances less than 1/10th of millimeter can you usggest better and cheap way to do that? thanks. cheers from italy
Alberto Gulmini Altough OLE is a good method for tracing your sketches you can also use XREF, if imported in .PDF format it can be snapped at crucial points but still its similar to OLE, There is no method for converting images into .DWG directly
i see i try the xref , i obtained good results carbon copyin with splines, doing many many points. let see. great person great tutorial do not stop! thanks
thanks for your encouragement alberto, keep learning and good luck
Drill mechanic vide
i am using auto cad 2018 in this version trim command doesnot work please help me
select trim command then press enter key then trim objects.
Thank you very much....
Welcome Celal
hi, thanks for this useful tuto, i have a question, when you joined the polylines before the fillet part did you do something else ? i can't fillet out some parts
Can you tell me exactly tell me at time in the video you have this issue?
it was just a problem with the filet part.. but in the other video it's ok. thnx man !!
Welcome Hassan
i cant download any of your videos, wanted to watch the gear design-spur gear.
langat gilbert youtube does not allows downloading videos you can only watch it online, you can subscribe to my channel so that you can access videos whenever needed or bookmark link of spur gear video.
I already made this but unfortunately I accidentally cancelled my work now I try to make this again but something's went wrong with the poly line when I join it and when I click it it clicks the first line not the whole I don't know what to do I repeat this many times and it never work like the last time I made perfectly accurate with your work.
Looks like you are not able to select overlapping objects, you can turn on selection cycling to make accurate selection. Type SELECTIONCYCLING press enter then type 1 and press enter again. then select objects and all overlapping will appear in a menu select required object.
it can't convert the 3 objects in 1 poly line? is it because of overlap?
There must be gap between objects, fill the gaps before joining all objects into a polyline.
thank you so much :)
btw your tutorial really helps me
Welcome, I am glad to know this :)
nice
Would it be any different to just unselect "Associative" when performing the polar array instead of exploding it?
No it wont be any different in fact it would be better as its going to save your time :)
Thank you for the reply!
Welcome John
I like it very good video
+zee princ Thanks
+SourceCAD yeah its really good video
Thanks Vian
urwell
Very helping tutorial again but i cant do the fillet command.i did try use smaller radius value but isnt work out.can u help me?i use 2014 version.
try to explode the geometry and try using fillet command on it.
thanks sir!its work! and at minute 10.25,when i presspull,the inside are presspull as well,not empty like u.i think i select right boundry.any of your step i missed?
any autocad books for step by step guiding & practices
Your videos are very nice. But bad sound quality. Plz check it
Very nice video thank you question how do you change the size of the wheel to 20 mm
And 30 Teeth
Thanks Eli
+Eli Dari in this drawing a random drawing is used so don't take it as standard gear, moreover you may need to find out by simple calculation all dimensions for 30 teeth and 20 mm wheel size.
can anyone tell me the link to download autocad
how to get 3D Modeling Tab (Options Dialog Box)? pls
+Marius Cheng I have shown steps of changing to 3d modelling workspace in this video's beginning th-cam.com/video/tV9c26ADGH8/w-d-xo.html
What units are being used??
thanks the explain very fast
+Khalid Alanazi Welcome Khalid
making this kind of gear is difficult on autoCAD 2016,,,its kinda hard coz there are instruction that the author lacks to say,,,
On the contrary, it's rather easy to make things in new versions of AutoCAD including 2016, here is another version of this video if you are interested th-cam.com/video/0ChAuV3MeX4/w-d-xo.html
You would of saved alot of time by mirroring half of the drawing.
the fillet step isnt working i am goin by every single thing u do and its not working.
please give me the link of this softwere...
You can download student version of the software from official Autodesk website from this link www.autodesk.com/education/free-software/autocad
AutoCAD 3dain Gear mai ban raha hai koi. Solution de
Nice
Good for me.
vry gud helfull video.thanku sir..kindly can u help me to install autocad 2013..or can u send me the setup of autocad ? Thanks
You can download free student version of AutoCAD from official Autodesk site for educational and non-commercial use. Links for downloading and installing the software are mentioned below.
Download: www.autodesk.com/education/free-software/autocad
Installation: th-cam.com/video/tnEY7dMburE/w-d-xo.html
great!
Vũ Đình Quyền Thank you :)
Is the Arc formed at at 5:08 an Involute profile?
No it's a simple arc not an involute curve, this is a representation drawing and hence only approximate geometries are used.
could you please show all the tools while you are using commands
Thanks for showing intrest in my videos, I generally explain all tools and sub tools while explaining commands (visit channel page) if you find missing subtools let me know and i will update it.
SourceCAD amazing
Dear Sir,
Please review your gear design terminology because you are not designing as per gear design guide line .
Regards,
Ashok Pareek
International Advisory Member of W.A.T.T.
Obviously, it is not an actual Spur gear design, it is for representation purpose only and many dimensions are randomly assumed and simplified to make the video.
how to rendering model like your videos thumbnails ???? And Please bro tell us which is cheap rendering software with good effects.
I rendered this thumbnail image in Keyshot which is a paid software cost about 1000$ but you can make realistic renderings in AutoCAD as well, here is an AutoCAD rendering tutorial th-cam.com/video/_Xqz7s73RK4/w-d-xo.html
Blender is an open source and free tool which can also be used to create stunning renderings here is the link www.blender.org/download/
SourceCAD Thanks bro 👍
Good Video...
But how did you take the dimensions..?
Good job ! But could you please explain to me how do know the values between construction lines. I would like to design my own gears..
You need to make calculations based upon gear layout, if you want to try your own gear use these layouts i hope it would help
db.tt/Yof1gNkb
db.tt/kwCDoQTk
Gud luck
Well and which unity do you use in your video because I'm french and millimeter would be easier to use for me.. anyway, I want to design 2 gears in order to have 1:2 reduction or 1:5. The first gear ( smaller ) should have a 40 mm pitch diameter.. How to make calculation with this hypothese..
Clement Malissard although i used inches here you can convert all dimensions used in this tutorial to mm, just multiply with 25.4 all dimensions for making intermittent gears scale down pitch circle of original gear and reduce number of teeth in smaller gears.
Many thanks !
Clement Malissard you're always welcome
where in the world are you getting these offset numbers from?!
These are just random numbers, not the one(s) which I have obtained after doing some meticulous calculations and the main objective of the video is to teach AutoCAD 3D tools.
good..
Eko Wijianto Thanks Eko :)
Bravooooooooo
the fillet at 7:10 why didn't you do it b4 array
Obviously, because I forgot :)
Here is a better version of that video th-cam.com/video/0ChAuV3MeX4/w-d-xo.html
thanks a lot
Could you send me the 3D model of this so I can 3D print it I'm not having much luck making this
Maybe you can try this tutorial instead th-cam.com/video/0ChAuV3MeX4/w-d-xo.html
Thanks
Shaik Moulali Welcome Shaik :)
sir may I asked were I can download your render program?
I use Keyshot for rendering, you can download trail of keyshot from here www.keyshot.com/
👍
what autocad version is that?
its AutoCAD 2013
EXCELENTE DIOS T EBENDIGA
Hellow sir.Can you upload autocad industrial drafting projects?
You will find related videos in this free course sourcecad.teachable.com/p/autocad-2d-and-3d-practice-drawings
Good video.But picture quality is low and your voice is not also clear
here is a better quality video th-cam.com/video/0ChAuV3MeX4/w-d-xo.html
Thanks Man. Your Tutorials are very useful.
i can't do joining please help
If it is related to joining arrayed geometries then you need to first explode the geometry before using union or join command. To use explode command select geometry then type X and press enter. Repeat join or union after using explode command.
Thank you
too tausan teltin?
ost er sunt
og godt!!!!!!!!!
🌹🌺🎉💖
On new videos can you please project your voice? Thanks!
18 bit
one month before
Can I have your email id please? I need to get in touch about the design ASAP
Abhi aero It is admin@thesourcecad.com
So blur lah
hi
how are you ?
if i ask you to make for me a 3D device , you can make it ?
Heba Hani What kind of device you want to be made? share specifications if possible and thanks for your interest in my videos.
actually it's looks like a telephone but theres a diffrent , if you can make it i'll send for you a picture of it
welcome =)
If you have a picture of it send it on my email ID
you need a gett mic
That was my first video on SourceCAD which was recorded with default laptop mic, obviously now I use professional mic :)
Check my new videos here th-cam.com/video/KbllQGAFDu4/w-d-xo.html