Informative video on how to Fix Drive Shafts on the Traxxas Maxx. Step by step instructional video to make replacing or fixing the drive Shafts on the Traxxas Maxx easy. Thanks for watching !!!
thank you so much. new to the rc world. like to watch repairs get done before attempting to do them myself. really really helps me to not mess anything up. Seriously thankyou.
Hey man, thanks for the video… can u please give us the info on where to order the parts? And parts numbers… I have to replace one side, but I definitely wanna go with an upgrade as well, the aluminum sounds a good idea..
I ordered the parts off Amazon. Type is the part name or rc truck name and a whole bunch of parts pop up. Sorry been awhile have no idea about the numbers.
I know it´s an old video, but as this being a "tutorial" it should be mentioned you forgot to install the outer baring behind the wheel hex (Partno. 5099A). I just had this happened to me on the rear and I was lucky the baring was still on there. Just ordered a few spares though.
Do yourself a favor man get rid of those screw pins and put in the harden steel pins very nice upgrade. Mine has all the aluminum where the weak points of the plastics are nothing over the top but where it’s needed. I haven’t had a problem breaking anything since. Check out Treal Hobby very nice precision aluminum excellent fit and finish. I also changed all my bearings out and replaced them all with Fasteddy Bearings better bearings smother ride.
I have no idea, my friend never tried it. I bought a set of GPM ones off Amazon and so far they work great. Been a year now they been on and zero issues. Hope all works out for you.
@@2ManyHobbies16 is there any way that you can plug a 2s Lipo in it and just pick it up off the ground and see and then let me know if it moves when you pick it up and give it throttle
thank you so much. new to the rc world. like to watch repairs get done before attempting to do them myself. really really helps me to not mess anything up. Seriously thankyou.
Any time glad I could help!!
I really enjoy any wrenching videos. Either repairs or upgrades, it’s rewarding after it’s completed and the maxx comes back to life.
Oh very cool glad you enjoyed the wrenching video!!! Thanks for watching
Great tutorial video of this issue. So irritating when things break when you are outside to have some RC fun.
For sure sucks !!! Just have to make the best of it lol Happens, thanks for watching and all your support .
This video was definitely made for people like me, THANKS!!!
Glad it helped!!!
Thanks this video helped a lot
I like how they make things weaker in certain areas to break. Better than moving up to more expensive parts
Hey man, thanks for the video… can u please give us the info on where to order the parts? And parts numbers…
I have to replace one side, but I definitely wanna go with an upgrade as well, the aluminum sounds a good idea..
I ordered the parts off Amazon. Type is the part name or rc truck name and a whole bunch of parts pop up. Sorry been awhile have no idea about the numbers.
I know it´s an old video, but as this being a "tutorial" it should be mentioned you forgot to install the outer baring behind the wheel hex (Partno. 5099A).
I just had this happened to me on the rear and I was lucky the baring was still on there. Just ordered a few spares though.
hello good job, very nice vidéo. Have a good day 👍👍
I think it’s great all the parts we upgrade to we can still fall back on the old parts our own little pop up👊🏾✌🏽
Absolutely 👍
Do yourself a favor man get rid of those screw pins and put in the harden steel pins very nice upgrade. Mine has all the aluminum where the weak points of the plastics are nothing over the top but where it’s needed. I haven’t had a problem breaking anything since. Check out Treal Hobby very nice precision aluminum excellent fit and finish. I also changed all my bearings out and replaced them all with Fasteddy Bearings better bearings smother ride.
Will check it out thanks for the info
You should buy the longer steel traxxas axls for the widemaxx.
They work great on high jumps in skateparks.
Nice video
Greetings from the Netherlands
Hello from the USA, thanks for watching my friend, and the advice.
Great video!!!
Thank you!!
how did you get that part off. the one you took off. off camera
Will the gpm shafts work with the widemaxx kit?
Yes they will, running wide kit and GPM shafts on mine
Hope this video helped who need help!!! Here is a link to the hub carriers that were installed..th-cam.com/video/rK-t29VAMdo/w-d-xo.html
Will a steel drive shafts from the stampede 4x4 fit on the maxx I’m fixing to order one or I might go to the hobby store
I have no idea, my friend never tried it. I bought a set of GPM ones off Amazon and so far they work great. Been a year now they been on and zero issues. Hope all works out for you.
@@2ManyHobbies16 and on the Traxxas maxx with the 4s esc can it take a 2s to 4s Lipo
@@dustinplee5067 thought it was 3 to 4 s not sure really always run 4s
@@2ManyHobbies16 is there any way that you can plug a 2s Lipo in it and just pick it up off the ground and see and then let me know if it moves when you pick it up and give it throttle
Can't see why you could not try it
Yep, with big 3.8 wheels like this, you definitely need metal driveshafts, those plastic outer drives almost will break off every one or second run.
They been on for a bit , now just not making the cut !!!
Traxxas steels and be done with it. Especially with those tires.
Anyone know if the rustler wheels will fit? The 4x4 ones. That kind of look like these. Haha. Thanks!
Not sure sorry !!!
Maybe zoom in i couldnt see shit you did the entire video