Crimping tools for these connectors are not available in our country that is why i tried it manually, Soldering all terminals will be better and stronger than using crimping tools though
Just thought I'd share my experience in case anyone else had trouble with these: I couldn't for the life of me get the wires to lock on the male-end (aka the longer side). Went through about 2 sets of connectors and a bunch of wire before I figured it out: needle-nose pliers. I had to grip the crimped connector through the other end and pull on it relatively hard to get it to lock since I had no luck in just trying to push it through by pushing on the wire itself. So definitely try to pull-method if your wire isn't locking into place on the male-end.
Reach in from either direction and pull the red locking plate out a bit. Or tap really hard and let inertia do it. The insert, and press the red plate down to lock it.
Not for the faint hearted. Once you figure it out you can do these pretty fast. Thanks for the video, I would have never figured this out. A big Thank You !!!!!
I don't see it in the vid but they have numbers on the ends of each connector so you can orientate the wires when you go in if you mess up your almost guaranteed damage before you can remove it. Also, when pairing wire's it is a good practice to use the same wire gauge it don't necessarily have to be the same color but yes the same size 😜. Also, just a thought the connections only connect one way so don't mess up and wire it backwards 🤣. Just sayin. Good luck all you don't need special tools but it does make it easier.
crimping tools for that connector is not available in our country that is why i tried it manually, soldering all terminals will be better and stronger than using crimping tools though, and yes using special tools makes it easier and faster. Thanks for watching.
Most china made products never provide manuals and they don't even include a tool for it, they may include an English manual sometimes but it's a pain to read in lol!
Not bad but putting on the weather seal before stripping the wire and using an open barrel crimp tool is a more efficient and better way to do these. When you have a bag of these connectors you really should have the special tool. It just makes life easier and your crimps look more professional.
i already have the crimping tool, takes almost months to ship because of the lockdown. bad thing i finished all 50pcs of the connectors already just before the crimping tool arrived lol
I fished mine out of the garbage after I saw this video. The instructions (single paper) were terrible and for the life of me I could not get them to work. This saved the day. Thanks
I bought two of these .Only needed one but I thought I would practise on the other one.I just can't get the terminals to lock despite studying 2 videos .I have been using a racheting crimper and I must be deforming the terminals.Now used up all the terminals!looking now at bullet connectors!
great, the only tricky part is to insert the pins into the housings such that they properly latch. but you hear the ‚click‘ when they do (in this video, the ventilator is quite loud). I‘ve used just over twenty of these connectors when I restored my BMW Isetta.
how wil i T off from this conectors? for example i have wire coming from battery and want to conect 2 lights .. can i joint red on red black on black a put it in one conector ?
Those appear to be AMP Superseal 1.5 connectors. Weather Pack is a competitor owned by Packard/Delphi, I believe. If you want a water-tight connection Superseal is a better choice than Weather Pack. If you want something even better, try looking at Deutsch DT series.
Hey buddy, I have an outboard motor boat I have a sensor I pulled it apart. A orange thing fell into the water some kind of rubber thing I’m going to pick it up at the Marine store. Can I put the rubber thing back on the same way you were putting this rubber thing on your wire
@@bertodiy Thank you for answering my wires for this boat sensor. It’s just like the way that you have in your video you a black and red wire go into the plastic thing with two individuals holes and they keep falling out because the orange rubber thing fell into the water, so what are you saying put the wires in the tube and put silicone in there or try to get a hot glue gun in there? Can you be very detailed of what you mean please?
How do you identify which type of terminal to crimp on the wire to enter the bushing terminal connector? I have a 220 545 52 28 pin bushing connector that ultimately needs to hook up to a p04602670AE heated seat module. I can not identify the terminal that is needed to save my life and no one seems to know either. A 2.8mm spade connector is close to the size but too small. I think it's 3mm. If not 3.5mm and rectangle shaped to go over the male end
![ได้เวลา! พาน้องแฝดฉีดวัคซีนครบ 1 เดือน🫣 [cc] แดนแพทตี้ SS2 | EP.52 |](http://i.ytimg.com/vi/IzeLtaXBLNE/mqdefault.jpg)
![[Full Episode] The Restaurant War Thailand ศึกพ่อค้าซ่าแม่ค้าแซ่บ Episode 2 | 29 ก.ย. 67](http://i.ytimg.com/vi/r3lfLNH6Ke4/mqdefault.jpg)
Trim those damned nails!! Thanks for the video though. 🍻
Interesting , but faken derty nails 🤮
how do you find it dirty? does it have dirt in it? lol thanks for watching sir ^_^
Discúlpame
😂there long not dirty pendejo😂
kuku derty palsu yang menarik
Cut those filthy talons. What kind of animal does this?
Misleading thumbnail, by which I couldn't concentrate on the video because of that monster
lol
Just thought I'd share my experience in case anyone else had trouble with these: I couldn't for the life of me get the wires to lock on the male-end (aka the longer side). Went through about 2 sets of connectors and a bunch of wire before I figured it out: needle-nose pliers. I had to grip the crimped connector through the other end and pull on it relatively hard to get it to lock since I had no luck in just trying to push it through by pushing on the wire itself. So definitely try to pull-method if your wire isn't locking into place on the male-end.
Thank you so much!
thank you!
Reach in from either direction and pull the red locking plate out a bit. Or tap really hard and let inertia do it. The insert, and press the red plate down to lock it.
Thank you Sir. I just bought a pack of these for my motorcycle and I probably woulda had the same problem as you. Now I know the fix. 🍻
A little bit of dielectric or rubber grease would help the rubbers to slide in and out.
how to removal the male contact conector?
Not for the faint hearted. Once you figure it out you can do these pretty fast. Thanks for the video, I would have never figured this out. A big Thank You !!!!!
Holy fingernails
How do you remove the pins is what I'm looking for. Looks the same as what I have
Brilliant video and I may stand a chance of fitting those I brought, Prior to viewing this I had given up all hope of trying. Thanks
this is exactly what I needed to know! Thank you for making this video!
Bought a sack of these and almost gave up on them until I found your awesome video thanks much!
A sack... a SACK???
@@SeriousSchitt Sorry not a sack I mean a bushel.
THANK YOU!! These things should come with instructions
I'm sending back, because no instructions.
Many thanks, especially for brevity. I'd rather watch this any day than 10+ minutes of yadda-yadda.
Why is your thumb nail so long?...lol
because its one of my special tools ^_^
Just bought some of these so good to see a tutorial of how to use them 👍🏻
thanks for watching sir
I don't see it in the vid but they have numbers on the ends of each connector so you can orientate the wires when you go in if you mess up your almost guaranteed damage before you can remove it.
Also, when pairing wire's it is a good practice to use the same wire gauge it don't necessarily have to be the same color but yes the same size 😜.
Also, just a thought the connections only connect one way so don't mess up and wire it backwards 🤣.
Just sayin.
Good luck all you don't need special tools but it does make it easier.
crimping tools for that connector is not available in our country that is why i tried it manually, soldering all terminals will be better and stronger than using crimping tools though, and yes using special tools makes it easier and faster. Thanks for watching.
Bro. How to unassembled? Thank 🙏
Thank you!!!!!! The company was no help on this, just sent a bag of parts, no assembly drawing or instructions.
Most china made products never provide manuals and they don't even include a tool for it, they may include an English manual sometimes but it's a pain to read in lol!
Not bad but putting on the weather seal before stripping the wire and using an open barrel crimp tool is a more efficient and better way to do these. When you have a bag of these connectors you really should have the special tool. It just makes life easier and your crimps look more professional.
i already have the crimping tool, takes almost months to ship because of the lockdown. bad thing i finished all 50pcs of the connectors already just before the crimping tool arrived lol
$17 for an ISWISS and you can crimp those tin parts like a boss. I like these connectors... the Deutsch ones a bit pricey in comparison. NICE!
Are those just regular wire crimps that have that hook like piece you can clamp the pin parts down with?
yes sir
Id love to see you check continuity
Where to buy trim pin & socket
I fished mine out of the garbage after I saw this video. The instructions (single paper) were terrible and for the life of me I could not get them to work. This saved the day. Thanks
Thank you 🙏
I bought two of these .Only needed one but I thought I would practise on the other one.I just can't get the terminals to lock despite studying 2 videos .I have been using a racheting crimper and I must be deforming the terminals.Now used up all the terminals!looking now at bullet connectors!
soldering the wire to the connectors will save time and damage to the locks
Thank you for sharing
is this good for automotive wiring?
yup
Bro this wire voltage capacity?
24-40volts
great, the only tricky part is to insert the pins into the housings such that they properly latch. but you hear the ‚click‘ when they do (in this video, the ventilator is quite loud). I‘ve used just over twenty of these connectors when I restored my BMW Isetta.
Thank
Watching this because I'm trying to de-pin one of these
Now we just need to see how to remove the wires.
its not easy sir i tried and damaged it, but i will try again next time ^_^
@@bertodiy I have the answer for you. It's in German but i think you get the idea.
I have copy'ed this guy and it works fine.
Fabulous! Super helpful to me, Thank you for sharing!
thank you very much,big respect from indonesia 🙏🙏
What's the name of what he's using in the video?
How to disassembly that?
watch it in reverse lol!
They are supposed to lock when assembled correctly, so you technically cant, cut off and start again
All tsilaight should be installed with these
how wil i T off from this conectors? for example i have wire coming from battery and want to conect 2 lights .. can i joint red on red black on black a put it in one conector ?
yes, as long as the two wires fit in one hole
Nice video lolods
yang nagiisang video lang nato nagsalba sa watch hrs ko di ko expect. tyamba lol!
@@bertodiy uu nga. 32k views. Panalo talaga paps
Thanks very much!
Pano baklasin to boss if ever? Madali ikabit mahirap siguro to i baklasin if ever gsto palitan at ireuse
dami nanga request pano magbaklas sir napaka hirap, til now pinag aaralan ko pa kung pano hehe!
Those appear to be AMP Superseal 1.5 connectors. Weather Pack is a competitor owned by Packard/Delphi, I believe. If you want a water-tight connection Superseal is a better choice than Weather Pack. If you want something even better, try looking at Deutsch DT series.
Great Video Thank You
Hey buddy, I have an outboard motor boat I have a sensor I pulled it apart. A orange thing fell into the water some kind of rubber thing I’m going to pick it up at the Marine store. Can I put the rubber thing back on the same way you were putting this rubber thing on your wire
i think you should replace it with a silicon or hot melt glue on that
@@bertodiy Thank you for answering my wires for this boat sensor. It’s just like the way that you have in your video you a black and red wire go into the plastic thing with two individuals holes and they keep falling out because the orange rubber thing fell into the water, so what are you saying put the wires in the tube and put silicone in there or try to get a hot glue gun in there? Can you be very detailed of what you mean please?
I think the correct way is to put the red part only in the end.
What tool you need ?
good job idol,,
salamat po ^_^
Link plz
EXCELLENT VIDEO!! THANK YOU!!
Salamat sir!
The smaller plastic piece seems to fit perfectly onto my mazda spark plug ignition coils! Will they stand up to the current?
I think these are 1.5A sustained right? Ignition coils draw 2-6A? Am I close?
Yes
Thank you
What size were these wires and molex pins
14-16
So macht man das nicht!
Parabéns pelo vídeo nota 10
how do you depin these?
its hard sir
Um ... isn't that a special tool?
my fingernails are my specialtools ^_^
@@bertodiy :)
How would you unpin each point?
i will make a video of it soon ;)
@@bertodiy :(
can the connectors be reused?
yes
@@bertodiy can you share a video on how to de-pin it? thank you!
Where we get the pins
from where you ordered it
Hyderabad
500010
san po makaka bili ng ganyan?
Lazada and shopee po
pls subscridbe ;)
TY...Next time use waterproof shrink...its faster...LOL...jk great job thumbs up
Gracias amigo 👍
please subscribe for more updates ;)
Can I use a 14 wire gauge on that connector?
Yes as long as it fit
How do you identify which type of terminal to crimp on the wire to enter the bushing terminal connector? I have a 220 545 52 28 pin bushing connector that ultimately needs to hook up to a p04602670AE heated seat module. I can not identify the terminal that is needed to save my life and no one seems to know either. A 2.8mm spade connector is close to the size but too small. I think it's 3mm. If not 3.5mm and rectangle shaped to go over the male end
you can see in the size of the hole of each socket where they can actually be inserted, it will not enter the wrong hole
Thank you this is a God sent video I was looking for help rewiring my Scooter and I bought those exact connectors
tnx mate, i also like your content
That’s not Weather-Pack, it is a AMP Superseal.
Gracias Berto, no sabía cómo montar una de la clavijas y ya está resuelto.
Me alegro de que mi tutorial le haya ayudado señor