Aye, the Jubilee clip trick is a good one. Been recycling that one since I first saw you doing it. Showed my mucker and he’s doing it too. For pushing on the return springs, I’ve got an old flat blade screwdriver that I’ve cut a wee notch in the middle of the blade with a grinder. You can locate the notch on the spring and give it a wee dunt. Top stuff as always Dave. Keep them coming 😎
Top class info and very well presented as per usual. Great idea using the Jubilee clip. I like this style of handbrake system, similar to some Volvos. When serving my apprenticeship in the very early 1970s at a government training centre we always used a rag soaked in methylated spirits to clean the area. Perhaps the OHS act would frown on that now to prevent people getting high or worse drinking it. 😄👍
Super helpful and great timing with the video! My parts should be arriving this week, ill report back lol. Ordered everything new( backing plate and 16/10mm bolts). HOpe i don't round off the 16mm one, thats damn low profile.
Nice one Dave , we've all called the springs on handbrake shoes , see it's been well looked after with the ting tong RTX starter from the sales always on shop , he should have got a spare , because as we know they are crap and don't last 😂😂👍👍
All proceeds from the shop goes to Poppy.
Find the items that are used on the Dave Sterl channel in the Amazon shop.
www.amazon.co.uk/shop/davesterl
Aye, the Jubilee clip trick is a good one. Been recycling that one since I first saw you doing it. Showed my mucker and he’s doing it too. For pushing on the return springs, I’ve got an old flat blade screwdriver that I’ve cut a wee notch in the middle of the blade with a grinder. You can locate the notch on the spring and give it a wee dunt. Top stuff as always Dave. Keep them coming 😎
Cheers Russell
Nice job Dave, cool trick with the worm type clamps! Thanks for sharing!
Very good, deep explanation. Thanks !
Hammer film productions…Great stuff. Well demonstrated 👍🍻
Top class info and very well presented as per usual. Great idea using the Jubilee clip.
I like this style of handbrake system, similar to some Volvos. When serving my apprenticeship in the very early 1970s at a government training centre we always used a rag soaked in methylated spirits to clean the area.
Perhaps the OHS act would frown on that now to prevent people getting high or worse drinking it. 😄👍
that jubilee clip trick is going to save me some swearing at brake shoes ..... we have all done it lol
Super helpful and great timing with the video! My parts should be arriving this week, ill report back lol. Ordered everything new( backing plate and 16/10mm bolts). HOpe i don't round off the 16mm one, thats damn low profile.
You've forgot about the "trigger" under the arm rest.
Good one Dave.👍
Hey Paul, how's things?
@@davesterlNot bad mate, great to see channel doing well.
Nice one Dave , we've all called the springs on handbrake shoes , see it's been well looked after with the ting tong RTX starter from the sales always on shop , he should have got a spare , because as we know they are crap and don't last 😂😂👍👍
HaHa, RTX starter went straight to the bin and replaced with a bosch unit
They are utter crap with about 60 % plus failure rate , both you and I won't even waste our time fitting one 😂😂
Hi, @devestel I need help with my polo 6r 3 cylinder diesel.