Wow - a masterpiece of engineering (the device) and the setup procedure. I compare this to a competitor by A...a. Read their manual many times without really understanding how the setup could be achieved.
Thank you! Andre changed his resolution in his latest videos. We can talk with him about updating this video. Let us know if you need anything else. Best, Justin Apollo Automation
Thanks for the comment! We have two radar tuning videos on this channel as well as a few guides on our Apollo Automation Wiki. We hope this helps but if not reach out to us on Discord or email us at support@apolloautomation. com. Best, Justin Apollo Automation
I'll sit down with the guys and try to go through the settings in engineering mode for the settings and get a video up in the near future. Apologies for the late reply, life has been hectic! In the meantime, might be worth posting in our subreddit or discord if you haven't already. Cheers!
will it be 110V AC version that i could mount in a dummy switch box? maybe even a real switch? just smart double dimmer? with a color night light? can dedicate a double or 3-gange box for "everything in one" device, but no fire hazard please
That's a great idea! We don't have plans to connect it directly to 110v AC as of now. We did add GPIO on the back so you can power it that way. We've talked about using recessed outlet gang boxes so that you could still hide it and use the USBC. Thanks, Justin Apollo Automation
Just can't get it to join my Wi-Fi network or show up in HA. It just says "The ESP will now try to connect to the network ... Please give it some time to connect. Many minutes, hours later - nothing. Are there restrictions to typing in the name of a hidden SSID or the length of the password or password characters? Tried two, both same issue.
Hello, yes there are difficulties with all ESPHome devices connecting to hidden SSIDs unfortunately. You first need to connect it to a non hidden wifi network. Here is a wiki article that will walk you through it but reach out if you need any further help. wiki.apolloautomation.com/books/general/page/connecting-to-hidden-wifi-network
@@ApolloAutomation Thanks. Used a visible SSID and got them on network and in HA. After I play with calibration, I will look at doing the suggested mod. Thanks for the quick response.
Wow - a masterpiece of engineering (the device) and the setup procedure. I compare this to a competitor by A...a. Read their manual many times without really understanding how the setup could be achieved.
Thanks for the kind words! It means a lot to our small company. Please let us know if you need anything else!
Cheers,
Justin
Apollo Automation
Awesome job, Andre! Excited for an aoutomation video! Keep them coming!
Thanks Andre Great video.
Thanks, Jerry! We've got more videos on the way. Let us know if there is anything specific you would like to see.
Thanks,
Justin
Apollo Automation
I would say resize screen before recording.
Thank you! Andre changed his resolution in his latest videos. We can talk with him about updating this video. Let us know if you need anything else.
Best,
Justin
Apollo Automation
Having a very hard time adjusting the radar sensitivity, is there any guide for this?
Thanks for the comment! We have two radar tuning videos on this channel as well as a few guides on our Apollo Automation Wiki. We hope this helps but if not reach out to us on Discord or email us at support@apolloautomation. com.
Best,
Justin
Apollo Automation
I am having issues setting up the still threshold. Can you make a video of of to set it up?
I'll sit down with the guys and try to go through the settings in engineering mode for the settings and get a video up in the near future. Apologies for the late reply, life has been hectic! In the meantime, might be worth posting in our subreddit or discord if you haven't already. Cheers!
will it be 110V AC version that i could mount in a dummy switch box? maybe even a real switch? just smart double dimmer? with a color night light? can dedicate a double or 3-gange box for "everything in one" device, but no fire hazard please
That's a great idea! We don't have plans to connect it directly to 110v AC as of now. We did add GPIO on the back so you can power it that way. We've talked about using recessed outlet gang boxes so that you could still hide it and use the USBC.
Thanks,
Justin
Apollo Automation
Just can't get it to join my Wi-Fi network or show up in HA. It just says "The ESP will now try to connect to the network ... Please give it some time to connect. Many minutes, hours later - nothing. Are there restrictions to typing in the name of a hidden SSID or the length of the password or password characters? Tried two, both same issue.
Hello, yes there are difficulties with all ESPHome devices connecting to hidden SSIDs unfortunately. You first need to connect it to a non hidden wifi network. Here is a wiki article that will walk you through it but reach out if you need any further help.
wiki.apolloautomation.com/books/general/page/connecting-to-hidden-wifi-network
@@ApolloAutomation Thanks. Used a visible SSID and got them on network and in HA. After I play with calibration, I will look at doing the suggested mod. Thanks for the quick response.