Die Werkbank ist schon sehenswert und wie er die Sterne herstellt ist sehr schön anzusehen 👏👏 Wie filigran die Sterne am Ende sind , einfach wunderbar 🤩👍👍
Great video. I loved your table. I loved that you glued your stars to a block before sawing them. (I was wondering how you were going to do that.) And I loved your stars. Great video. Thank you.
Great project. Before you glue anything if you coat the wood with Sanding Sealer the glue will not stain the wood and makes it easier to sand and look awesome. Thanks for the demo.
Very cool - thank you for sharing. Question: what is the advantage to not having your stop-guide across the entire fence? Is it a kickback thing? Going to try this :)
Goodnight! I would like to know if possible the degree of the saw machine is the thickness of the wood, would it be possible for you to send it would you like to do it?
I think someone with woodworking knowledge could easily figure out these angles. But even if you can’t, they’re snowflakes, which means you can’t really mess them up. Experiment.
He is using 6 pieces to make them. 360 degrees in a circle, which is what they end up as. There are 6 joints. 360 divided by 6 equals 60. So each joint is 60 degrees. Divide 60 degrees by 2 equals 30 degree angles. 360 divided by 30 equals 12, which if you multiply the 6 pieces by the 2 cuts for each, you end up with 12 30 degree cuts that equal 360 degrees total. 6 would be the right number of pieces, but you can use a different amount. If you decided to use 12, then you would divide 360 by 12 and get 30 degrees for each piece, divided by 2 would be 15 degree cuts on each side of the pieces.
Дааа... Я не верил, когда мне говорили, что некоторые за границей обладают мышлением младенца, которому всё надо объяснить. Оказывается, это правда... Люди, вы что, не знаете элементарной геометрии? 😮
Fabuloso. 👏👏👏👍🇵🇪
Only one word: OUTSTANDING
Die Werkbank ist schon sehenswert und wie er die Sterne herstellt ist sehr schön anzusehen 👏👏 Wie filigran die Sterne am Ende sind , einfach wunderbar 🤩👍👍
Great video. I loved your table. I loved that you glued your stars to a block before sawing them. (I was wondering how you were going to do that.) And I loved your stars. Great video. Thank you.
أحبك يامعلم❤👍👍👍👍👍👍👍👍👍
@Mr.H Woodworking this is very clever! I'm definitely going to attempt this! Thanks for the ideas!
I don’t need any wooden snowflakes, but I do see this method as a viable way to make your own wooden knobs.
Great project. Before you glue anything if you coat the wood with Sanding Sealer the glue will not stain the wood and makes it easier to sand and look awesome. Thanks for the demo.
Very good idea.
awesome thx for posting
Excellent work, CONGRATULATIONS...!!! Thank you very much for sharing.
Greetings from Uruguay...!!! PS: Excuse my Google-English...!!!
Thank you so much!
That is absolutely the most, “F your prices, I’ll build it myself” table saw I’ve ever seen.
Muito trabalhoso…, mas vale cada pozinho da madeira, PARABÉNS, adorei…, que todos tenhamos um santo natal…, todos.
Abraço aqui do Brasil 🇧🇷
Oh my gosh how pretty
man, I want to ask permission to do this for me too
Is amazing...
Sensational !
Super robota✌️🤓pozdrawiam
Trabalho perfeito
Parabéns
Faioskie ozdobne gwiazdki do dekoracji fajnego wzoru i rozmaitego kształtu
ابدع
Nice work and great procedure Im sure whomever gets them will like them very much. Do you have any plans for sale. Thank you for sharing
Are you just gluing up the edges with CA glue?
Those are really nice
Thank you!
Maaf saya terlambat melihat video anda👍
very goood....👌
Thanks!
Outstanding!!
Thanks!
How much days does it take?
👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
What glue is that
What’s the make or type of glue you use please?
CA wood glue
Bonjour, et merci beaucoup pour cette vidéo. question: tu utilise quoi comme colle pour assembler les morceau 👏👍
Beautiful. What was the angle of the table saw please?
Very cool - thank you for sharing. Question: what is the advantage to not having your stop-guide across the entire fence? Is it a kickback thing? Going to try this :)
Yes it's to help prevent kick back. Never use your fence and miter together
danke schon
¿Cuál es la medida del ángulo de corte?
Nice Coke nail
What is the angle are you using
Matt I cannot get the paint to stick to the snowflakes could use a little help thank bill
Can you Share Details to get it done myself ? I am From India.
what is the degree on the first cut
i love how he shows off his cocain finger nail
What is with the pinky nail?
Most of the time a single long pinky nail is used to snort cocaine. Seriously, but not saying that is why this guy has it.
Do you have plans available for the Christmas ornaments on your video?
I guess the cat got his tongue. 🤷♂️
This whole setup screams “eventual catastrophic kickback” to me. I’d hate for him to get a star kicked back at his face like a shuriken.
Maybe that’s his booger nail… (deep reach style)
Is bladde set on 45 degree
It should be set at 30 degrees
So many safety hazards in this video almost to the point they might be on coke…..don’t know why I say that
Goodnight!
I would like to know if possible the degree of the saw machine is the thickness of the wood, would it be possible for you to send it would you like to do it?
Sorry I don't understand what you mean.
Thank you for watching!
@@MrHWoodworking I think he was talking about the angle the pieces were cut, or ''blade angle''. 30 degrees
Quelle colle utilisez vous ?
J'utilise une colle à base d'eau, qui sèche rapidement en 10-15 secondes au contact
Merci d'avoir regardé!
@@MrHWoodworking vous pourriez me préciser la marque ou m'envoyer un lien où je peux l'acheter ?
Merci 🤗
WTF is up with that long pinky finger nail???
cocaine.
That’s his coke finger, you saw how fast he was moving!! 😂
He’s a Starsky and Hutch fan, that’s how the wanna be gangsters did it back in the 70’s.
Now it can't be unseen!
Peruvian Pixie Dust! :P
little talking on your cutting would went long ways.
What Type of glue?
It's a fast-adhesive water-based glue, which in my country is called 502 glue.
Thank you for watching!
what is the angel???
This is an almost exact copy of another youtube video out there.
Yes, and the other one tells you angles, sizes, etc. And makes suggestions.
Yes, Steve Ramsey ( Woodworking for Mere Mortals ) about 9 or 10 years ago. This is a poor copy of his video.
whats the point in making a youtube video of these beautiful stars if you don't explain anything ,as to angle of cuts etc.
I think it's self explanatory. At least experienced wood worker comprehend it.
I think someone with woodworking knowledge could easily figure out these angles. But even if you can’t, they’re snowflakes, which means you can’t really mess them up. Experiment.
They look like consecutive 45s
He is using 6 pieces to make them. 360 degrees in a circle, which is what they end up as. There are 6 joints. 360 divided by 6 equals 60. So each joint is 60 degrees. Divide 60 degrees by 2 equals 30 degree angles. 360 divided by 30 equals 12, which if you multiply the 6 pieces by the 2 cuts for each, you end up with 12 30 degree cuts that equal 360 degrees total. 6 would be the right number of pieces, but you can use a different amount. If you decided to use 12, then you would divide 360 by 12 and get 30 degrees for each piece, divided by 2 would be 15 degree cuts on each side of the pieces.
Дааа... Я не верил, когда мне говорили, что некоторые за границей обладают мышлением младенца, которому всё надо объяснить. Оказывается, это правда... Люди, вы что, не знаете элементарной геометрии? 😮
Answer please!
These silent movies suck. Nobody wants to see you playing with your tool.