Dell Inspiron 15 3567 Disassembly RAM SSD Hard Drive Upgrade Battery Keyboard Replacement Repair
ฝัง
- เผยแพร่เมื่อ 28 ธ.ค. 2021
- Disassembly Repair Fix Tutorial Teardown Guide If my videos helped you save money, please consider helping me continue to make these videos by sending me a little appreciation, even $1 would be greatly appreciated. Thanks! :)
Venmo:
"@BinhVu" Last 4 Digits if it Asks Are 6734
Zelle or PayPal (friends and family from a bank account so they don't charge any fees):
itsbinhrepaired@gmail.com
Patreon:
/ binhrepaired
Feel free to mail me your old electronics or parts you replaced during an upgrade.
Mail:
It's Binh Repaired
1288 N Hillview Dr.
Milpitas, CA 95035
Tesla referral link: www.tesla.com/referral/binh58522
I recently have the same computer as yours, but due to mainboard problem, the laptop is not fixable and requied buying new one, now I got diffrent model computer, already upgraded to SSD and it's more easier to open up the lid
Thank you very much for the much helpful information! With your help alone I 've upgraded my old laptop's SSD Hard Drive and now I will move on a RAM upgrade. If someone needs advice on how to open up his/hers Dell Inspiron 15 3567, THIS IS THE VIDEO YOU WERE LOOKING FOR!
Thank you for posting the video.
doing an ssd swap on this laptop right now as the edible kicked in and this video really helped me out! very easy to understand and with a lot of side notes about the internals i loved learning about! wish there were more people on youtube that had content like this
recently upgraded my laptop same model,dell 3567 ,1TB HDD replaced with 1TB ssd Samsung evo 870 after using Samsung's free cloning software 'Samsung data migration'....worked very well...no problem with secure boot on...Even AV was on but kept it in flight mode/disconnect internet...also upgraded the RAM 4GB 2400MHz 1.7 v with another 4 GB RAM 2400MHz...upto 8 GB ...spec shows that this model can accept upto 32 GB RAM but for my basic use it would be an over-kill..prying out the palm rest from the base was quite tough the 1st time esp near the right hinge....there prying under the metal strip of the DVD slot lip adjacent to the hinge and a bit side to side move/wiggle of the base, easily cleared that sticky right hinge (left one if the laptop is upside down!) while the innards are open ...might as well change the CMOS battery and clean the dust from the fan....
Thank you, now i managed to switch my broken hdd for an ssd, better than all tutorials i saw till now
Thank you so much, very detailed step by step process that got me through putting an SSD in here. Now it runs perfectly! Will come back to this for RAM or DVD hard drive swap. Very helpful!
Thanks ! Excellent detailed step by step, clear narration, cautions at critical points where you could easily break your computer. a dummy like me replaced hard drive. Am sticking with Binh's tutorials, he won't steer you wrong. Sending donation
Thank you. Just used your instructions to upgrade to SSD for the exact same model as in your video. Worked like a charm. I had a refurbished Dell Outlet model that I found out was missing 4 of the various screws. Hope it holds together!
Thank you for this excellent video. I've upgraded several laptops, but each is slighty different. After not getting the ssd cable seated properly the first time, I found that taking the unit apart the second time was much easier.
Excellent video. Really helpful. I need to replace with an SSD tomorrow for a colleague as the 1 TB hdd that came in with the laptop is dead slow ! In fact, I googled a lot today and also dell support to see if this model supports M.2 NVME. Now I know for sure, it does not support. Thanks a ton !!
Thank you a lot for this video. It helps me to mount a ssd into my Dell Laptop.
Thank you for this concise review. Helped me a lot. Keep posting dude.
about keeping a track of the screws....i make a diagram on a piece of thermocol/foam about the screw positions and stick the screws on the foam as per the diagram....that way one can identify which screw goes where ....and doesnt get lost....also keep a magnet handy if some screw jumps off and needs 'magnet-fishing' to find
Not even sure what you're getting at, but great tutorial, I haven't even finished taking it apart yet and I've already demolished a number of clips, screw holes, and other plastic bits holding my laptop together, and this is after taking every screw out, every ribbon cable unplugged, and while using a pry tool. Can't wait to see what my disaster of a laptop looks like when it's back together, assuming it even functions still.
Excellent video
you can push out the DVD tray from the adjacent slot for the battery slot ,where a corner of the DVD tray is visible
Thank you for this excellent vidéo.
Bro, I love you!
Could you please let us know, how crucial bx 500 is working with your machine, is there any issues you observed after some time or OS installation.