For Safety, next time you hammer a rusty slide in vice or however; NEVER, have the barrel pointing at you chest/abdomen. The likelihood of the accidental discharge is remote, but your own ‘test’ indicated the powder was still dry and if struck just the right way, the weapon could fire. Safety first and always creates a safe work environment. Keep up the enjoyable content.
If the round was going to go off it would have when he did the electric rust removal or heat on the slide since there was a hole where the flame was hitting the barrel
To remove metal rust, instead of using sandpaper or wire brushes, use sandblasting so that the traces of sandpaper or wire brushes are not left on the metal parts and their rust is removed uniformly!
Sandblasting is a terrible idea when it comes to firearm restoration. Not only does it leave a rough surface that you’ll have to go back over and smooth out anyway, there’s little to no control over the amount of material being removed. Slower is almost always better
Awsome. I'd just be afraid of the loss of steel strength due to corrosion. Filling in the worn steel with bondo and sanding it allowes a nice finish. But it doesn't restore the frames strength it once had.
I will admit...when I saw it had ammo in it, and you torched the action. My thought was "well, that's one way to find out if there's a round chambered."
Hartford, CT, U.S.A" for "Colt's Patented Firearm Manufacturing Company." Patent dates are engraved on the left side of the barrel, ranging from 1897 to 1913. While the Colt1911 is officially listed as beginning service in 1911, the model originated in the late 1890s prior to undergoing modifications.
For anybody who's complaining or will complain in the future, just shut up. Weather it's real or not you clicked on the video, and you're watching it. Shut up and enjoy it. It's satisfying.
Perdonen mi ignorancia al preguntar. Ustedes hacen eso para satisfacción personal, o qué.? No sé el precio que tendría una pistola como esa o equivalente, pero creo que la restauración cuesta muchas veces más que comprar una nueva y además la seguridad que ofrecería la nueva contra ésta restaurada. Marcos Jiménez de República Dominicana. Gracias.!!
Sir.!!!! You are Sooooo Awesome.. im glad you got the bullets out before you put that blow torch on there.. but you are the professional’ you know what your doing.🙏🏾
Some interesting techiques, but any concerns about the reheating and steel strength or the amount of material removal? Could be why test firings aren't shown.
Have you considered heavy copper plating to help fill the remaining rust pits, sand back smooth and then nickel plating and polishing, I assume these are ornamental non firing weapons when they are finished..
I think a tig welder would be better for filling in the pitting due to the flatter welds.. Other than that I am impressed with the patience and overall restoration work.
What 1900's variant is that(m1907?) cause I'm almost certain that gun was not made by colt(in fact it may be a savage variant based on the grips for the slide). Very enjoyable video, amazing job on the restoration.
Some people should be awarded a doctorate in other areas of expertise. This man, along with others have should be praised for their skills! Imagine having a doctorate in “making things better”! I don’t see the difference between a the 3 doctors. Everyone has a specialty for humans. Why can’t we make it change from ‘mechanic to engineer, to Doctors? At the end of the day we are only talking about moving pieces, right?
One of the shorts were so good but too short that I decided to look for a video by this creator. Seeing the video was a half hour, I felt that there was no way I’m gonna be able to sit through all this. I was wrong. I might even watch a second. Liked and happily subscribed. Quality content with some humor worked in.
Totally impressive!!! It opened my horizons as to what can be done… I was a complete sceptic at the beginning… a cynic half way through… and in complete AWE as the process unfolded. This was my Damascus experience!
AMAZING...the patience (of Job obviously) to devote to a couple of Colt wall hangers (I like to think they were a pair carried by some famous person..kinda like Patton 😏) Never EVER have I seen someone take a mig welder (with small diameter wire and low heat I suppose) to a pistol 😳 GREAT STUFF... (this is prolly one of the best) vids I've seen here so far. Keep on keepin us memorized wit da 🎩 🪄 my brutha 👍
It'll be very dangeous to fire this"repaired" weapons. The reasons for that are many, they look good enouth but are fragile on a functional/technical level. In other words this is just another unqualified question and also the reason why you don't got any response from the Content Creator.
Nice work bro and why did u empty the 9mm from the magazine its a waste of gunpowder. But the ammunition is old and it might blow up any time so its great u removed the gunpowder 5:01
I'm also time traveling back to the great depression America era when there were FBI agents, the Chicago Police, and gangsters who used automatics. This is about when Dick Tracy was first at large.
That first weapon will be somewhat restored to workable condition but I personally would not fire it considering the shape it is in. I did guess that the metal being melted onto the second weapon was some form of silver solder.
The effort you put into editing as well as the work you do with the firearms and restoring them makes me honestly mad more people aren’t subscribed to u.
Not everyone aspires to be a gunsmith or gun owner l. The second amendment has successfully led to 550 mass shootings this year and we have plenty to go.
@Rusty Restore You must had a lot of redos on your brazing. Oxidation is no joke when it comes to bonding metal. You didn’t use flux to help the metal rods bond better to the shell of the gun. Most times, it’ll just not bond properly because of oxidation and just melting the rod onto gun won’t help. It creates bubbles and won’t look good after you grind it down.
No logro entender por qué restaura las armas y no las prueba, o sea güey, queremos ver cómo quedó su funcionamiento. No estaría mal una prueba de disparo al final.
The fact that it took nearly 10 minutes of the video just for the disassembly just hurts. Like, how could anyone let something like that get so rusty that it takes so long to just disassemble
Since he used body filler on that first one to repair the rust divots could that gun still be used or is it just a wall hanger now? Body filler cracks on cars from hitting repeated bumps. I would think it would also crack over time from the gun being shot. Maybe I'm wrong.
@@Irusssska Это ТТ Тульский Токаев американцы украли его у России и всё высокотехнологичное оборудование что имеет США и Европа всё украдено в России это уже признали даже сами воры...
For Safety, next time you hammer a rusty slide in vice or however; NEVER, have the barrel pointing at you chest/abdomen. The likelihood of the accidental discharge is remote, but your own ‘test’ indicated the powder was still dry and if struck just the right way, the weapon could fire. Safety first and always creates a safe work environment. Keep up the enjoyable content.
Exactly first time we need take care with safety!!! Good reminder.... some times we wanted to be fast and conclusion our job !
This man speaking true facts
If the round was going to go off it would have when he did the electric rust removal or heat on the slide since there was a hole where the flame was hitting the barrel
@@ulyssessoares7903 , ,, .
Vaya....!!!!! Crei que no tendria restauracion,ha quedado muy bien para exposicion.Saludos desde Spain.
Can't believe the effort put into making an item look like it's rusted just to then remove, amazing!
Love the way you make the project fun to watch .
To remove metal rust, instead of using sandpaper or wire brushes, use sandblasting so that the traces of sandpaper or wire brushes are not left on the metal parts and their rust is removed uniformly!
Аквапласт тоже неплохо.
@@user-lu4ns6wz3iplease English, or Turkish or Farsi or Arabic or Azerbaijani, write 😁
Sandblasting is a terrible idea when it comes to firearm restoration. Not only does it leave a rough surface that you’ll have to go back over and smooth out anyway, there’s little to no control over the amount of material being removed. Slower is almost always better
Awsome. I'd just be afraid of the loss of steel strength due to corrosion. Filling in the worn steel with bondo and sanding it allowes a nice finish. But it doesn't restore the frames strength it once had.
Another excellent recovery👌🏼
Most would have deposited in the bin….. well done!
It's always great to watch your videos. I enjoy them very much.
I was lucky enough to get one of those, colt 32, hammerless 1903. John Browning was a firearms legend.
I will admit...when I saw it had ammo in it, and you torched the action. My thought was "well, that's one way to find out if there's a round chambered."
Der Mann hats richtig drauf....starke Leistung👍Damit schießen ist Glaube ich eine andere Sache.Tolles Video....Top👍👍👍
Another great restoration 👏👏
Hartford, CT, U.S.A" for "Colt's Patented Firearm Manufacturing Company." Patent dates are engraved on the left side of the barrel, ranging from 1897 to 1913. While the Colt1911 is officially listed as beginning service in 1911, the model originated in the late 1890s prior to undergoing modifications.
I would love to hear the stories that colt could tell!😄
Amigo eres todo un profesional, eres lo maximo, eres único, te doy 5 estrellas y un ❤
Great job on most of the 1st gun, what about the inside of the barrel? I never seen any work done on it, i wouldnt put a round in it
This Guy Is a Gun mastermind and Genius no doubt
Again not restored. But you are doing good work. Excellent conversation peace or paper weight.
Perfect comment on content like this
@@Goldtech6973 yeah I love to watch the actual restoration videos and these ain't it
All of these videos are truly Amazing and I'm hooked turns old piles of rust into some Beautiful Firearms
Llllllllllmmmmm😢😂🎉
Looks impressive,but I wouldn’t risk losing my hand shooting it!
AMEN TO THAT! J
Everybody isn't you.
@@sunstarburstwhy don’t you load up a mag and give her a whirl then cupcake! 😂
@@jayceecombs6887up
For anybody who's complaining or will complain in the future, just shut up. Weather it's real or not you clicked on the video, and you're watching it. Shut up and enjoy it. It's satisfying.
Amazing so many very rusty and mud splatted handguns show up on this channel these years.
Perdonen mi ignorancia al preguntar.
Ustedes hacen eso para satisfacción personal, o qué.?
No sé el precio que tendría una pistola como esa o equivalente, pero creo que la restauración cuesta muchas veces más que comprar una nueva y además la seguridad que ofrecería la nueva contra ésta restaurada.
Marcos Jiménez de República Dominicana. Gracias.!!
Genius restoration 😊
No abia por dónde cogerla,,ha quedado increíble 👍
Buena restauración me gusta 👍 estés contenido es muy maravilloso por lo tanto tiene mi lay un fuerte saludo Dede Russia 🇷🇺 de un cubano 👍🙏🤝🇨🇺👈
Przepiękne są odrestaurowane te dwa pistolety eleganckie cacuszka one są pozdrawiam twórcę tego filmiku serdecznie 👍👍👍👍👍
Sir.!!!! You are Sooooo Awesome.. im glad you got the bullets out before you put that blow torch on there.. but you are the professional’ you know what your doing.🙏🏾
Could have been one in the breech though.
@@markrainford1219 👻🙏🏾🍀🍀🍀🍀🍀
Yahoo!!nice sirr!!kumpleto rekados!!💯👍Philippines sir,,👏👏👏👏👏🙂
Some interesting techiques, but any concerns about the reheating and steel strength or the amount of material removal? Could be why test firings aren't shown.
In some country’s it’s not allowed to fire guns
That gun should never be fired again
Love watching your videos. Would like to try it myself
真是 好手藝!!👍👏👏掌聲響起!!👍
これだけの技術持った人初めて見ました、素晴らしい。感服🤩
일본에는 이런 사람이 없습니다. 😢
Amazing detailed..
It is too far gone. You have worked a miracle just getting it apart. Darn shame it was a work of art.
Have you considered heavy copper plating to help fill the remaining rust pits, sand back smooth and then nickel plating and polishing, I assume these are ornamental non firing weapons when they are finished..
It's definitely ornamental. The integrity of the slide, frame and barrel are far too compromised to be fired safely.
The person is highly skilled specialist in making pistol. He knows welding ,lathe work, painting and have good workmanship. He knows chemistry also.
I hope this is sarcasm
I think a tig welder would be better for filling in the pitting due to the flatter welds.. Other than that I am impressed with the patience and overall restoration work.
@@davidgalea6113 it's not restoration if it doesn't fully functional. And because of the ruff condition it can't be. I do enjoy the videos though
Trabalho de mestre, do jeito que estava e após a restauração ficou perfeita. Deve ser muito cara uma restauração desse nível.
Vc e um verdadeiro artista chefe parabéns
What 1900's variant is that(m1907?) cause I'm almost certain that gun was not made by colt(in fact it may be a savage variant based on the grips for the slide). Very enjoyable video, amazing job on the restoration.
دمتگرم بسیارعالی بود این ویدئو 👍👍👍
awesome work have you ever tried to nickel plate some of your work. you have all the stuff to do it just need to get a nickel anode
0:01 "Here. Have a rusted gun instead."
สุดยอดจ้า very good 👍👍👍+1
Can you tell me the stuff you used to break down the rust, please???
How do you make the patina?
Damn it man, that’s fine work there sir.
Some people should be awarded a doctorate in other areas of expertise. This man, along with others have should be praised for their skills! Imagine having a doctorate in “making things better”! I don’t see the difference between a the 3 doctors. Everyone has a specialty for humans. Why can’t we make it change from ‘mechanic to engineer, to Doctors? At the end of the day we are only talking about moving pieces, right?
One of the shorts were so good but too short that I decided to look for a video by this creator. Seeing the video was a half hour, I felt that there was no way I’m gonna be able to sit through all this. I was wrong. I might even watch a second. Liked and happily subscribed. Quality content with some humor worked in.
What an AMAZING effort! Just spectacular work and a super interesting video! I subscribed about 5 minutes in. Awesome stuff!
Totally impressive!!! It opened my horizons as to what can be done… I was a complete sceptic at the beginning… a cynic half way through… and in complete AWE as the process unfolded. This was my Damascus experience!
That's a TT-30 Tokarev, possibly a Soviet or Polish model.
AMAZING...the patience (of Job obviously) to devote to a couple of Colt wall hangers (I like to think they were a pair carried by some famous person..kinda like Patton 😏)
Never EVER have I seen someone take a mig welder (with small diameter wire and low heat I suppose) to a pistol 😳
GREAT STUFF... (this is prolly one of the best) vids I've seen here so far.
Keep on keepin us memorized wit da 🎩 🪄 my brutha 👍
Davvero un ottimo lavoro; complimenti.
視頻的拍攝也是很棒!👍👏👍👏👏
Хорошая игрушка получилась.
You are amazing.
Love to watch your videos.
Is it possible to text the video of what you are doing.
And why you are doing it.
Just nice to know.
Hay quá bạn ơi thật tuyệt vời
Sei molto bravo complimenti, ma secondo te possono sparare ancora questi bei pezzi lucidati.?
Absolutely not
where did you find that gun?
That is not an M1911A1, that is a Russian TT-33 Tokarev
Nice work. Pity about not test firing. Not sure why one would go through the exercise of restoration like this when it still won't work.
It'll be very dangeous to fire this"repaired" weapons. The reasons for that are many, they look good enouth but are fragile on a functional/technical level. In other words this is just another unqualified question and also the reason why you don't got any response from the Content Creator.
Не нужно спорить это Тульский Токарев не знаю что он реставрировал всё видео но в конце передёрнул затвор и положил на стол ТТ...
Súng củ bạn nên làm vạy sẽ đẹp hơn
Nice work bro and why did u empty the 9mm from the magazine its a waste of gunpowder. But the ammunition is old and it might blow up any time so its great u removed the gunpowder 5:01
I'm also time traveling back to the great depression America era when there were FBI agents, the Chicago Police, and gangsters who used automatics. This is about when Dick Tracy was first at large.
“Alchemy and metallurgy brought me here…I swear of it”-ib😈🌬
После разборки ударно-спускового механизма TH-cam отключил монетизацию.
Это очень круто!
В России делают по-другому
From the looks of it the best place for that thing would've been right back where you found it
I like how he sat and waited for 25 hours
That first weapon will be somewhat restored to workable condition but I personally would not fire it considering the shape it is in. I did guess that the metal being melted onto the second weapon was some form of silver solder.
Cannot shoot it but a great restore. Thanks.
Parabéns 👏🏻👏🏻👏🏻👏🏻Continue com seus vídeos
The effort you put into editing as well as the work you do with the firearms and restoring them makes me honestly mad more people aren’t subscribed to u.
Not everyone aspires to be a gunsmith or gun owner l. The second amendment has successfully led to 550 mass shootings this year and we have plenty to go.
Shouldn’t the rifling in the barrel be inspected?
@@michelmendoza1769 I think you mean mental illness! Inanimate objects don't get up and do anything on their own.
@Rusty Restore You must had a lot of redos on your brazing. Oxidation is no joke when it comes to bonding metal. You didn’t use flux to help the metal rods bond better to the shell of the gun. Most times, it’ll just not bond properly because of oxidation and just melting the rod onto gun won’t help. It creates bubbles and won’t look good after you grind it down.
Where can i buy the breading
I’m calling BS on remaking rails w a zip wheel
Keren restorasinya, tambahan didempul ulang..❤❤❤
Amazing work
No logro entender por qué restaura las armas y no las prueba, o sea güey, queremos ver cómo quedó su funcionamiento.
No estaría mal una prueba de disparo al final.
Is it just me or was that a TT30 instead of a Colt at the end?
The fact that it took nearly 10 minutes of the video just for the disassembly just hurts. Like, how could anyone let something like that get so rusty that it takes so long to just disassemble
.... ELEGANT ANT COLT 45 ... ... ÔK AND YES ....! * THANKS...! *
Как из коьта получился ТТ??
Liked the video due to the careful removal of the rounds then… THEN.. you burnt SUBSCRIBE into wood with the powder!! Aces!!!👍🏽
Where do you find all this stuff😮
Disposed murder weapons
Browning Cal 32 ACP?
Great job just for show case not for shooting 👊🏽
Wow new sub amazing work. I really mean it
That's how God is restoring my life
nice job
Perfect 👍
São bons no que fazem só falta testar
Since he used body filler on that first one to repair the rust divots could that gun still be used or is it just a wall hanger now? Body filler cracks on cars from hitting repeated bumps. I would think it would also crack over time from the gun being shot. Maybe I'm wrong.
they are art,nothing more......you fire one of these you are gonna eat shrapnel
I'm wondering if is it safe to let the rusted gun pointing at you whilst cleaning it? 😅
wait so what happens to the guns after restoration? does he like keep them?😅 i can only imagine how many he’s got since he’s done soo many!
Of all these “restorations” I hope you realize NONE are actual functional firearms anymore. Or should I say any smart person wouldn’t attempt it
Awesome!
your videos are really cool, I say hello from Russia
Great job
Наконец то браунинг 1903 прекрасная машинка..
Its colt😂
@@Irusssska Это ТТ Тульский Токаев американцы украли его у России и всё высокотехнологичное оборудование что имеет США и Европа всё украдено в России это уже признали даже сами воры...
It’s a dead firearm. Nothing more that a conversation piece
All in all I'd say that this one probably wasn't painted on rust to make it look like an easy restoration :D
I do like the plexiglass electrolysis tank.