Hello. Thanks for the video very educational. I am having similar issues with the date wheel and more than likely will need to get the same parts you replaced. Therefore wanted to ask what are the part numbers of the pieces you acquired and where? Lastly for the winding woks. Specially that circle with the little ball bearings. Is there a need to special clean and place lubricants prior to reinstalling ? Thanks for any insight you can provide.
Hello, and thanks for watching! I obtained parts from a donor movement which I bought on eBay. If I understood it correctly, you are asking about bearings in automatic works, where the oscillating weight goes. Yes, those bearings need to be lubricated before putting rotor on. I did it off camera. Good luck in your repairing!
I opened the watch and noticed that the golden balance spring has stopped and not moving. Should I fixed this or need to replace that part to make it working. Thanks
@@mudasirzubair6039 Mudasir, I cannot answer your question, because I am not able to psychically inspect your watch. Not moving balance wheel could be simply because the mainspring is not wound up, or it might be many other reasons. I'd recommend to find somebody with watchmaking experience in your area, who can diagnose the problem. Good luck!
Orient moviment and seiko is very confiable, i have an 46943 and an 6119, cheap, precise and robust, recomend, buy used and work very good, maximum 10 secounds a day for + or -.
Hi, i've service my 46941 and change the balance wheel with new one...but it still not functioning..what's cause this problem? Can u give ur opinion..thanks :)
@@luqmantarmizi1687 Here are specs for Orient 46941 Features automatic no manual wind sweep second day: 2 languages, set by pusher at 2h date: quickset Data 12''', Dm= 27.0mm, Do= 27.4mm (dial spacer +0.2mm) H= 5.45mm F= 1.3mm T= 1.7mm 21 jewels f = 21600 A/h power reserve 42h Hands 1.50 x 0.90 x 0.20mm
@@luqmantarmizi1687 And I just found some specs for 42972 movement Could be the same as yours). It matches mine but construction of the movements is different. Orient 42972 Features automatic no manual wind sweep second day: set by pusher at 2h date: quickset Data 12''', Dm= 27.0mm 27 jewels f = 21600 A/h Mainspring / battery 1.00 x 9.5 x 0.10mm Hands 1.50 x 0.90 x 0.20mm
Just, beautiful. Absolutely amazing this job.
Thanks a lot for your nice comment!
Best video ever!
Thanks!
Very nice restoration job!
Beneficial tutorial. Thanks and also happy New Year 👍
Fantastic video. Merry Christmas and A Happy New Year.
Thank you! Merry Christmas and a Happy New Year to you too!
Hello. Thanks for the video very educational. I am having similar issues with the date wheel and more than likely will need to get the same parts you replaced. Therefore wanted to ask what are the part numbers of the pieces you acquired and where? Lastly for the winding woks. Specially that circle with the little ball bearings. Is there a need to special clean and place lubricants prior to reinstalling ? Thanks for any insight you can provide.
Hello, and thanks for watching! I obtained parts from a donor movement which I bought on eBay. If I understood it correctly, you are asking about bearings in automatic works, where the oscillating weight goes. Yes, those bearings need to be lubricated before putting rotor on. I did it off camera. Good luck in your repairing!
Thank you for the info!
Great job ! Super clap to you.👏👏👏
Thank you very much!
nice video
i like it
Just want to restore my father watch. Does it require battery for working ? Thanks
This is a mechanical watch and it doesn't use a battery. It uses a mainspring instead, as an energy source. Good luck in your restoration!
I opened the watch and noticed that the golden balance spring has stopped and not moving. Should I fixed this or need to replace that part to make it working. Thanks
@@mudasirzubair6039 Mudasir, I cannot answer your question, because I am not able to psychically inspect your watch. Not moving balance wheel could be simply because the mainspring is not wound up, or it might be many other reasons. I'd recommend to find somebody with watchmaking experience in your area, who can diagnose the problem. Good luck!
@@ValentechTime 👍🏻
Orient moviment and seiko is very confiable, i have an 46943 and an 6119, cheap, precise and robust, recomend, buy used and work very good, maximum 10 secounds a day for + or -.
Agree, I plan to do video on Seiko as well. Thank for your comment!
Hi, i've service my 46941 and change the balance wheel with new one...but it still not functioning..what's cause this problem? Can u give ur opinion..thanks :)
Did you replace a whole balance assembly or just a balance wheel? Please describe in details what exactly was done.
@@ValentechTime whole balance wheel..and its already working sir 😂😂..thanks for reply..
@@luqmantarmizi1687 Great!
Hi, is 42970 movement same with this ?🙏
I do not know the answer simply because did not find an info on the movement you asked about, sorry...
@@ValentechTime thanks sir🙏
@@luqmantarmizi1687 Here are specs for Orient 46941
Features
automatic
no manual wind
sweep second
day: 2 languages, set by pusher at 2h
date: quickset
Data
12''', Dm= 27.0mm, Do= 27.4mm
(dial spacer +0.2mm)
H= 5.45mm
F= 1.3mm
T= 1.7mm
21 jewels
f = 21600 A/h
power reserve 42h
Hands
1.50 x 0.90 x 0.20mm
@@luqmantarmizi1687 And I just found some specs for 42972 movement Could be the same as yours). It matches mine but construction of the movements is different.
Orient 42972
Features
automatic
no manual wind
sweep second
day: set by pusher at 2h
date: quickset
Data
12''', Dm= 27.0mm
27 jewels
f = 21600 A/h
Mainspring / battery
1.00 x 9.5 x 0.10mm
Hands
1.50 x 0.90 x 0.20mm
@@ValentechTime thanks a lot sir for ur answer🙏🙏🙏🙏
Shouldn’t oil the pallet fork tail but oil the pallet stone
I agree, good point.