I caused an Air Leak doing the DUMBEST thing! - Cons of Air Suspension
ฝัง
- เผยแพร่เมื่อ 7 ก.ย. 2024
- Cons of Air Suspension, air leaks in the lines... Still not enough to make me go static. Thanks for watching!
Catch me on IG: @Ozomeromann
TY for 12K!
I had the same exact issue on my passenger side shortly after I had it installed.
Just needed to tighten it half a turn and I was good!
Recently though, ALL of my fittings in my tank and my lines BEFORE the manifold went bad at the same time!
They were DOT fittings too!
Just finished swapping all of those out and now im all good to go.
I was the 10th subscriber, just crazy how fast your channel grew, but happy it is bro☝️
The problem probably isn’t so much your throw out bearing. It is suggested by ford when you change the clutch kit including the throw out bearing, that you actually change the clutch fork pivot ball inside the bell housing. It wears and causes vibration of the clutch fork usually making that noise you hear. I’m willing to bet that is the actual problem, and it will in turn mess up a throw out bearing
The way i fixed that issue on my 04 mach was to dump the stock cable,quadrant,and firewall adjuster. For the cable you get the one you can adjust at the fork. Snug it up at fork and it takes out the vibration. Been like that for a few years now and no issues.
By experience I had the same noise and it wasn't my bearing,it was the simple fact that the pivot ball didn't have grease, so I'd change the clutch fork and pivot ball and grease it up
Omg past 12 k I remember when you were at 5k I hope your channel keeps growing
Man, found you channel by mistake. I like it because you do everything by your self.
Hey man I’ve been watching your videos lately and now your one of the only people I keep up with. I think that you should put the defuser back on and get a duck bill spoiler. If i were you I would wrap the car so the paint doesn’t get chipped. It helps the car keeps it value and you get to have your car a different color. Could bring more subs too!😉
Honestly, I miss the no spoiler on the mach 1. It looks so clean without the spoiler. But I respect the decision. :)
🔥 I'm actually working on a headlight project too
I wonder if we're doing the same thing lol. What I'm doing I've also never seen it on another new edge either. Waiting for that video
Very nicely done on your content and love channel man you make some good videos .
My Mach sits about the same as your ride height on Steeda springs. Slow over the bumps, or it’s scraping!
Very nice I have a 2001 mustang gt
Thank you for blessing us
Your best guy ever saw in TH-cam
I have the same issue in my garage go park your car on another flat surface and it will give you the right height of your car the garage might look flat but it's not perfect so it makes your alignment look off
What was the total price of all the things that you did to it?
Thank you
I think it actually looks better raised up in the front like that.. its not much but subtle...
and this is the other channel...
What’s up bro! Quick question. So when you set your RH, do the #s need to change at all? Cause I set mine at 91 all around & after driving it, they drop down to about 85-83 is it normal? I haven’t gotten an alignment for that reason cause I’m not too sure if they need to stay at 91 and not drop.
Your sister needs air ride on her car that would be awesome
I just did my throwout bearing... next day it started that stupid noise, i didnt replace the other components, big mistake.
You should always warm your car up for at least 5 minutes before you drive or risk premature engine wear from oil starvation. Plus if your engine has aluminum components they need time to expand to normal operating size.
Go for deamon eyes 4 the black 1
Need a ford clutch fork along with new clutch kit if u want that noise to go away
Bro the problem is your not letting all your pressure out the bags
I replaced my throw out bearing and it keeps making that noise. Just not as loud as yours
Dude I've replaced my throwout 3 times on my GT and it still makes noises. I'm about 99% sure it's just a quirk of these things.
What air ride system do u have?
What exhaust system do you have
I thought it was always better to air out whenever the car is off so you dont put unnecessary pressure on the bags
Should I add my terminator cobra to my miata channel or should they be separate channels??
Just keep it on 1, harder to build 2 channels
True that's what I was thinking too
Or what about waking up earlier?
How did you remove the headlight glass ??
It just pops out lol
@@Ozomeroman they had told me it was risky doing that 😂😂😂🤦
If your clutch isn’t adjusted properly, you’ll thrash throw out bearings
Huuuge thumb sup 👍
Your not gonna color those headlights blue are you? Lol
I have very bad experience with this thing I have rear back leaks this trash cost to much money for nothing I don’t recommend no good 👎👎
Third!
Way too overly low. Was engineered the stock height for a reason
Tsssssssssssssssssssssss
First