if tappet clearance is less then can we face issue of rpm fluctuations in working conditions when engine is hot ?? i am facing issue of fuel burning, left exhaust missing and misfiring, rpm fluctuations, & engine shutting off at idle when engine is hot, more stress to the engine while revving & while going through the higher rpm range
Yes, if the tappet clearance is less, it can cause issues with rpm fluctuations when the engine is hot. This is because as the engine heats up, the metal components expand, including the tappets. If the clearance is too small, the tappets can't expand properly, and this can cause issues with the valve timing which will lead to rpm fluctuations as well. Reduce the engine speed and load to minimize stress on the engine until you can address the issue.
bro my ns200 just done 20000km ODO Clearance adjusted 3 times but it’s loosing again and again and only intake clearance is loosing not issue with exhaust clearance
Because Valve will open early so the output of engine will be reduced. And to maintain the same output you have to burn more fuel. Hence fuel consumption will increase.
thank you very much. as a generator operator i am learning a lot from ur channels.5 🌟
thank you for making this topic super easy to understand
Thank you ❤️
Useful content. Do more videos. All the best.
if tappet clearance is less then can we face issue of rpm fluctuations in working conditions when engine is hot ??
i am facing issue of fuel burning, left exhaust missing and misfiring, rpm fluctuations, & engine shutting off at idle when engine is hot, more stress to the engine while revving & while going through the higher rpm range
help me regarding this problem
Yes, if the tappet clearance is less, it can cause issues with rpm fluctuations when the engine is hot. This is because as the engine heats up, the metal components expand, including the tappets. If the clearance is too small, the tappets can't expand properly, and this can cause issues with the valve timing which will lead to rpm fluctuations as well. Reduce the engine speed and load to minimize stress on the engine until you can address the issue.
bro my ns200 just done 20000km ODO Clearance adjusted 3 times but it’s loosing again and again and only intake clearance is loosing not issue with exhaust clearance
warranty not available?
buy tools and do it yourself every 1000kms then or try to change the parts, use fully synthetic oil motul 7200 or 300v.
nice.
brother, how to take the tappet clearance?
Link is given in the description, read it .
Why fuel consumption will increase when tappet clearance is less? I need a more detailed explanation
Because Valve will open early so the output of engine will be reduced. And to maintain the same output you have to burn more fuel. Hence fuel consumption will increase.
@@marinerspoint ah makes sense. Then why temp exhaust will be very high?
Same reason. Since the valve is opening early...the gases which are still burning get their way through the valve causing the exhaust temp to rise.
how to adject valve clearance
With the help of Locking Nut and Adjusting Screw...