Hey AK, great video 😊, you have some great tips and tricks. I've done some of my own refining in the past, but I haven't done it for at least 7 years. Watching your videos makes me feel like doing it again 😊.
Hey AK bear. You have a lot of good material to work with!👌 Many details are completely plated in gold. gold plated transistors always have a good gold plating. Not like in your last video about 800 grams of pins with low gold plating. Great video! 👍
At 4:33, good videos, maybe you won't lose your gold with the diffused tin, I get what you're saying, so I did a batch of pins recently but I soaked mine in hydrochloric and hydrogen peroxide for about 3 or 4 weeks even though there wasn't hardly any soldier on the pins because I shaved the pcb's with a puddy knife and hammer , after soaking I reverse electroplated them, previous to the reverse electroplating approach I was using the chemical process, if you have any hydrochloric you think there may be precious metals in solution but still a solid cement out using various aluminum then when reactions stop but the hydrochloric is still dirty and dark add bleech slowly, same with nitric without hydrochloric add bleech to drop out sediment
Hi, I'm a computer technician from México. I've keep for a few years 80+ motherboard, 80+ DIMM's, 80+ SODIMM's, 100+ processors, a big box of optical and floppy drive controller boards, a nice bunch of lcd driver and pci boards, about 2Kg of gold plated pins and connectors... It's worth the effort trying to process all of this? First time trying, none of this materials have had any costs, all are replaced ruined parts.
Awesome. You have collected a lot of material. By recycling this amount of material, you can earn a lot of money and buy something interesting. For example, a helicopter! 😉👌
At 5:28, if you think there's plastic in it boil it until down close to the amount of acid you started with when it begins to boil over a water boiling temp the ph increased let cool and the plastic will settle at bottom as a sludge if any, including the water in the fresh acid you started with boil a percentage down at water boiling temp, the metals in the acids and water will seem to lower the boiling point but it's just the opposite the metals are heating up becoming more concentrated, it'll boil over in 10seconds when the ph is reached and the water is evaporated out so you have to keep a constant eye on it and pull it off the heat, this is at the lowest boiling temperature
I appreciate you seeing the humor in my comment. And thank you for all of your chemistry/refining content. It’s very informative. Keep making them and I’ll keep watching them!
Hello. The material is a mixture of all kinds of pins, resistors and transistors. Some pins have a metal frame and, of course, they are magnetic. To dissolve such a mixture, i need just a little more acids. Hydrochloric acid dissolves the magnetic part of the material well. Yesterday I put a piece of metal into this solution to extract all the copper from the solution, today I pulled this piece of metal out of the bucket and the metal partially dissolved. Imagine, even dirty old hydrochloric acid, after gold has been precipitate with iron sulfate, still dissolves the metal 🙂
If you're talking about the acids I used at the end of the video to clean the gold powder, then yes. They are still strong acids for dissolving metals.
Hi🖐 I was too busy. I was tired from work and didn't want to do anything, I just collected material every day. Now after a hard summer I have time and material for my hobby. I have already started making videos. I will publish the next video on November 1st 🙂
@@akgoldbear7669 thank you for responding. I'm so glad. Your my favorite TH-camr, and I'm still sore all your old videos were deleted. I used to watch them all, several times each. I feel like nobody knows this stuff like you, you know what items contain the precious metals. You just have a way of presenting the information in your videos. I look forward to you returning to TH-cam. Thanks!
Thanks for another great video! A couple of Questions: Since SMB to drop gold is a horrid smell is iron sulfate any better? Do you add a few mg's of sulfuric to your AR and could you do a video refining gold ore? Thanks again and keep up great work!
Working with sodium metabisulfite requires very good ventilation or working outside. Sometimes I use sodium metabisulfite and even working outside gives me a headache. SMB precipitates gold well, but it is a very toxic material. I only use smb if I don't have iron sulfate. Sometimes i adding sulfuric acid to the solution, it all depends on the material being dissolved. About gold ore, yes, there is such a plan. My friend has a private mine and he asks to test his stones with acids for gold. 🙂
I didn't quite understand you. Google translator translates somehow strangely. If you are asking, did I add urea to neutralize the nitric acid?! Yes, I added urea.
My bank is filled from floor to ceiling with all sorts of electronic junk. My friends always bring me broken things to work and can you imagine, this year I began to refuse broken electronics that they bring to me for free! I just don't have time to take it all apart 🤪
Hello. Always calculate this: for every gram of material there are 3 milliliters of aqua regia. If you have 100 grams, then you need 300 milliliters. If the material is magnetic, then more acid will be required and the solution must be heated 🙂
Hi you have both beakers of Acid Now you added a liquid saying Feeros Sulfate what was the ML of it and what was the Liquid ? is there any way to write down ever thing im trying to write down the process of every thing Thank you . Ron B
Hello. I used 3 pounds (1360 grams)of iron sulfate. I dissolved iron sulfate in water, it turned out to be 1800 milliliters, and I poured 900 milliliters of iron sulfate into each beaker 🙂🖐
If you have concentrated sulfuric acid, mix three to one (one part of sulfuric acid and three parts of water) and you will get an electrolyte. Or just buy electrolyte at some auto parts store. Good luck 😉
Перерабатываю всё по максимальному. На видео я извлекаю только золото, но за кадром я потом вытаскиваю всю растворённую медь. То-есть получаю медь и медный купорос.Из этого раствора сегодня я достал 1650 граммов чистой меди. После всего этого раствор получается пустой и его смело можно смыть в унитаз 🙂
@@akgoldbear7669 ho bisogno dei tuoi video e vedo che non pubblichi più 🙂 volevo capire se hai un altro canale dove pubblichi i tuoi lavori. Ciao grazie
Now I understand 🙂 I was very busy at work. All this time I was collected material. Now after a difficult summer I have time for my hobby. On the first of November I will publish a new video. Thank you for your interest in my little channel 🖐
Hmm Watch the last video of the telecommunications pins. You can see the half plated pins vs fully plated. The 12 grams from those mixed grade seemed a reasonable amount to me. Some looked nice quality. It's really not hard to accumulate gold plated material. Gotta enjoy sorting things though 😂
Facts. If plating should yield .002 Ak is on point with his extraction. Plus the gold left over in the waste. Ive done gf material only to be disappointed but i kno the mistakes i made to 'earn' the weak yield i got.
AK more videos please, I know you work so I hope you make regular vids! 😮
I don't have time now.
Maybe next month 😉🖐
Cool.
Hey AK, great video 😊, you have some great tips and tricks. I've done some of my own refining in the past, but I haven't done it for at least 7 years. Watching your videos makes me feel like doing it again 😊.
Hello jewelry maker. You need to do this again, so you can get gold or silver for your business much cheaper! 😉✌
Hey AK bear. You have a lot of good material to work with!👌 Many details are completely plated in gold. gold plated transistors always have a good gold plating. Not like in your last video about 800 grams of pins with low gold plating. Great video! 👍
Thanks Juan. To collect material i have to work every day after work for another five hours 🙂
AK, another great video! Btw, I do like your vault. 😉👊
Thanks a lot 🙂🖐
Thanks very much your knowledge is on display and appreciated
Thank you for spending some of your time on my channel 😉
Excelent work my friend. Thanks for share your chemistry knowlege and show us how to do a good 999 gold
Thanks for the kind words 🙂
At 4:33, good videos, maybe you won't lose your gold with the diffused tin, I get what you're saying, so I did a batch of pins recently but I soaked mine in hydrochloric and hydrogen peroxide for about 3 or 4 weeks even though there wasn't hardly any soldier on the pins because I shaved the pcb's with a puddy knife and hammer , after soaking I reverse electroplated them, previous to the reverse electroplating approach I was using the chemical process, if you have any hydrochloric you think there may be precious metals in solution but still a solid cement out using various aluminum then when reactions stop but the hydrochloric is still dirty and dark add bleech slowly, same with nitric without hydrochloric add bleech to drop out sediment
🙂👍👍👍
Another great day with AK! Thank you buddy!
Thanks a lot. thanks for your support 🙂🖐
Очень хорошо Браво!👌
Спасибо, что уделили немного времени моему каналу 😉
Great video. And, you can reuse the nitric acid / hot water bath over again... Beautiful gold bar.
"Beautiful gold bar" ... I think so too 🙂🖐
Wow you are a scientist👏👏
Oh, I think I've seen you somewhere. No, I'm not a scientist, it's just my hobby that I do in my free time 🙂
These great vids just keep coming!! Well done Bear.
Thanks a lot 🙂🖐
good job
Thank you for spending some of your time on my channel 🙂🖐
Eu adoro seus vídeos ,foi um excelente trabalho,te acompanho sempre,muito obrigado por fazer estes vídeos ,um grande abraço e sucesso...
Thank you for your kind words and thank you for continuing to watch my videos 🙂🖐
Hi, I'm a computer technician from México. I've keep for a few years 80+ motherboard, 80+ DIMM's, 80+ SODIMM's, 100+ processors, a big box of optical and floppy drive controller boards, a nice bunch of lcd driver and pci boards, about 2Kg of gold plated pins and connectors... It's worth the effort trying to process all of this? First time trying, none of this materials have had any costs, all are replaced ruined parts.
Awesome. You have collected a lot of material. By recycling this amount of material, you can earn a lot of money and buy something interesting. For example, a helicopter! 😉👌
like usually 👍👍
Thanks 🙂
At 5:28, if you think there's plastic in it boil it until down close to the amount of acid you started with when it begins to boil over a water boiling temp the ph increased let cool and the plastic will settle at bottom as a sludge if any, including the water in the fresh acid you started with boil a percentage down at water boiling temp, the metals in the acids and water will seem to lower the boiling point but it's just the opposite the metals are heating up becoming more concentrated, it'll boil over in 10seconds when the ph is reached and the water is evaporated out so you have to keep a constant eye on it and pull it off the heat, this is at the lowest boiling temperature
Thanks for the tips 🙂 and thank you for your time on my little channel 🖐
“One. Two. Three. Four. Five. Six circuit board. Ah, Ah, Ah, Ah, Ah, Ah, Ahhh.” -Count from Sesame Street.
Can you imagine I can count to eight! That's all I can do. I can’t even imagine what would happen if there were more than eight circuit boards! 🤪
I appreciate you seeing the humor in my comment.
And thank you for all of your chemistry/refining content. It’s very informative. Keep making them and I’ll keep watching them!
Childhood flashback 😂
@@danielfiore7648 🙂✌
Beautiful
I think so too 🙂
Espectacular!
🙂✌
AK I Love your channel!! One question were your pins magnetic or a mix of magnetic and non magnetic or just brass?
Thank you
Hello. The material is a mixture of all kinds of pins, resistors and transistors. Some pins have a metal frame and, of course, they are magnetic. To dissolve such a mixture, i need just a little more acids. Hydrochloric acid dissolves the magnetic part of the material well. Yesterday I put a piece of metal into this solution to extract all the copper from the solution, today I pulled this piece of metal out of the bucket and the metal partially dissolved. Imagine, even dirty old hydrochloric acid, after gold has been precipitate with iron sulfate, still dissolves the metal 🙂
بقيه المحاليل هل يمكنك للاستفادة منها في عمليه ثانبه
If you're talking about the acids I used at the end of the video to clean the gold powder, then yes. They are still strong acids for dissolving metals.
Very nice
Thanks 🙂
@@akgoldbear7669 Whatever happened to your 2022 videos? I thought those were good videos, especially the one with the bear cubs 😂
Very good👍
Thanks 🙂🖐
We need more videos, it looks like uts been 6 months since you last uploaded.
Hi🖐 I was too busy. I was tired from work and didn't want to do anything, I just collected material every day. Now after a hard summer I have time and material for my hobby. I have already started making videos. I will publish the next video on November 1st 🙂
@@akgoldbear7669 thank you for responding. I'm so glad. Your my favorite TH-camr, and I'm still sore all your old videos were deleted. I used to watch them all, several times each. I feel like nobody knows this stuff like you, you know what items contain the precious metals. You just have a way of presenting the information in your videos.
I look forward to you returning to TH-cam. Thanks!
Hope you are doing well bro! Been thinking about you.
Hello. I'm fine. A lot of work at work, I don't have any free time for my hobby. Maybe next month I'll make a video 🙂
Thanks for another great video! A couple of Questions: Since SMB to drop gold is a horrid smell is iron sulfate any better? Do you add a few mg's of sulfuric to your AR and could you do a video refining gold ore? Thanks again and keep up great work!
Working with sodium metabisulfite requires very good ventilation or working outside. Sometimes I use sodium metabisulfite and even working outside gives me a headache. SMB precipitates gold well, but it is a very toxic material. I only use smb if I don't have iron sulfate.
Sometimes i adding sulfuric acid to the solution, it all depends on the material being dissolved.
About gold ore, yes, there is such a plan. My friend has a private mine and he asks to test his stones with acids for gold. 🙂
Sir...mau tanya, apakah larutan regia yg dikasih besi nitrat sebelumnya tidak dikasih urea dan SMB, thanks
I didn't quite understand you. Google translator translates somehow strangely. If you are asking, did I add urea to neutralize the nitric acid?! Yes, I added urea.
Watcing from solomon island
Thank you for spending some of your time on my channel 😉
Wow nice piggy bank
My bank is filled from floor to ceiling with all sorts of electronic junk. My friends always bring me broken things to work and can you imagine, this year I began to refuse broken electronics that they bring to me for free! I just don't have time to take it all apart 🤪
Very important to me.
How much aqwa rigea you used to the tow Kg?
Hello. Always calculate this: for every gram of material there are 3 milliliters of aqua regia. If you have 100 grams, then you need 300 milliliters. If the material is magnetic, then more acid will be required and the solution must be heated 🙂
@@akgoldbear7669 but iron if it solved in aqwa rigea, is that normal?
Саламмки бро потдержал как всегда класс 👍
Спасибо за поддержку 🙂
Обратно дамой не хочешь вернуться😊
Привет. Очень хочу но пока страной управляет бизнесмен Путин и ОАО единоросс, нет.
Hi you have both beakers of Acid Now you added a liquid saying Feeros Sulfate what was the ML of it and what was the Liquid ? is there any way to write down ever thing im trying to write down the process of every thing Thank you . Ron B
Hello. I used 3 pounds (1360 grams)of iron sulfate. I dissolved iron sulfate in water, it turned out to be 1800 milliliters, and I poured 900 milliliters of iron sulfate into each beaker 🙂🖐
استاذي هل المحاليل التي تستخدمها هي حامض النتريك _حامض الهيدركلوريك_ كبريتيد الحديد ولك الشكر والتقدير
I used aqua regia with a little sulfuric acid, since almost all the material was magnetic. To precipitate gold, I used iron sulfate.
Sir, please upload again gold recovery from ic ram, plase sir
I don't have this video, I deleted it and a hundred other videos too. Sorry. I think you can find a similar video here on TH-cam. Good luck 🙂
😮
🤔 ........ ...... .... ... .
what electrolyte do you use for washing?
Any electrolyte. The electrolyte is the same in all stores
If you have concentrated sulfuric acid, mix three to one (one part of sulfuric acid and three parts of water) and you will get an electrolyte. Or just buy electrolyte at some auto parts store. Good luck 😉
а куда потом остатки от реактивов, отходы, деваете?
Перерабатываю всё по максимальному. На видео я извлекаю только золото, но за кадром я потом вытаскиваю всю растворённую медь. То-есть получаю медь и медный купорос.Из этого раствора сегодня я достал 1650 граммов чистой меди. После всего этого раствор получается пустой и его смело можно смыть в унитаз 🙂
Deberías hacer un vídeo sobre condensadores cerámicos C100 saludos desde Gran Canaria
🎉🎉
🙂🖐
Sir, why your takedown video gold recovery from ic ram
Sorry, I was in a bad mood 😬 ......................... 😉
Ei amico dove sei finito?
What do you mean?! ))
@@akgoldbear7669 ho bisogno dei tuoi video e vedo che non pubblichi più 🙂 volevo capire se hai un altro canale dove pubblichi i tuoi lavori. Ciao grazie
Now I understand 🙂 I was very busy at work. All this time I was collected material. Now after a difficult summer I have time for my hobby. On the first of November I will publish a new video. Thank you for your interest in my little channel 🖐
i think its oll vodeo fake, to much gold from 2 kg
Is 11.6 grams of gold too much?! Seriously?! Thanks for the dislike 😅 You are awesome. Have a good weekend...
Hmm Watch the last video of the telecommunications pins. You can see the half plated pins vs fully plated.
The 12 grams from those mixed grade seemed a reasonable amount to me. Some looked nice quality.
It's really not hard to accumulate gold plated material. Gotta enjoy sorting things though 😂
Facts. If plating should yield .002 Ak is on point with his extraction. Plus the gold left over in the waste. Ive done gf material only to be disappointed but i kno the mistakes i made to 'earn' the weak yield i got.
Not to mention the plated material he is showing looks heavier than the usual electro-plated stuff you see these dayz that only yield .2 percent
@@colonialcharlie8702 Thank you. I think he just didn't watch the whole video. He saw 18.6 grams and immediately became indignant 😁
Watcing from solomon island
Thank you for spending some of your time on my channel 😉