i have a similar build. THE PRIMER ball sucks it, period. what i did to prime my pump is i just have a piece of flex hose and i mannually suck water just once and then detach the hose. super simple and keeps the pumped primed. good build love all the thought gone into it
That's a good idea! It's been a while since I built it and experimented and filmed the video, so I'm not sure if this was included - but these days the pump is outside of the livewell and I just hang it over the side of the kayak in the water.
I bought two live well check valves and the squeeze bulb primer from Amazon.. Per other Videos the primer pump only works well with the two check valves installed. I also used the better pump. I plan to use my scupper holes like the hobie. I will post how well it works once I get a chance to test it out
I had tried something like that post-this video and it never did work right. Of all the ones I have seen the most reliable seems to be the Hobie one, but with a modification installed. I cannot remember who made it, but it was basically a modified primer bulb that a guy had built and offered for sale. I believe it eliminated any back flow towards the water source when priming. As for the one I made here, I still use it when I need to carry live bait and don't wish to drag a minnow bucket. Now that I have a motor on the kayak the minnow bucket is not as annoying to tow. I have always been really happy with this live well though and I like that I can use it bank fishing also.
Hey thanks for watching! Hope you will consider subscribing if you have not already. All of the plumbing and fittings for the livewell came from Lowes. You could also find it on Amazon, and at pretty much any farm and home store in the section that has parts for sprayers, and by the plumbing.
I don't know where the 50$ comes from since the water tight dog food container alone cost more than 40$ container 40$ battery 25$ pump 20$ adapters and tubing 10$ dry box 10$ switch, connector and cabling 10$ This thing cost well over a 100$.
Common misconception is that these pump suck up water, they DON'T. Drain/Outlet needs to be bigger than the inlet. One way valve is really great in the inlet tube thru the scupper
The Hobie one will suck it up from the scupper, this particular pump design just isn’t made for that. I did have a one way valve in the inlet tube at one point but it was causing problems. Thanks for watching!
Hi thanks for watching! If you are not already a subscriber I'd appreciate it if you were! The container is a pet food container, specifically found in the dog food section of places like farm and home stores. Walmart may have stuff like this as well. I am not sure what the brand is or anything. I built it a while back but I believe it is a 7 gallon tank. They are usually sold in pounds since it is for dog food, but google helped me convert that to approximate gallons.
Hey thanks for watching! This is a 20LB container, they sell them based on pounds not gallons. It's roughly 5.5-6 gallons? I'm guessing but confident its over 5 gallons. I did not realize this wasn't addressed in the video so I'll add it to my subscription. Thanks for catching that. Don;t forget to subscribe!
Not all DIY projects go well the first time....or times LOL. Thanks for watching, don't forget to subscribe!
Where did you get the bucket you used?
@@Fishin1AZfarm and home
Very nice build and good job making it work when it didn’t do what you wanted the 1st time
Thank you!
i have a similar build. THE PRIMER ball sucks it, period. what i did to prime my pump is i just have a piece of flex hose and i mannually suck water just once and then detach the hose. super simple and keeps the pumped primed. good build love all the thought gone into it
That's a good idea! It's been a while since I built it and experimented and filmed the video, so I'm not sure if this was included - but these days the pump is outside of the livewell and I just hang it over the side of the kayak in the water.
Looks great, been thinking about getting in to amateur fishing tournaments. Love your setup.
Thanks for watching! Good luck with your tournaments, this set up would definitely help you out!
I bought two live well check valves and the squeeze bulb primer from Amazon.. Per other Videos the primer pump only works well with the two check valves installed. I also used the better pump. I plan to use my scupper holes like the hobie. I will post how well it works once I get a chance to test it out
I had tried something like that post-this video and it never did work right. Of all the ones I have seen the most reliable seems to be the Hobie one, but with a modification installed. I cannot remember who made it, but it was basically a modified primer bulb that a guy had built and offered for sale. I believe it eliminated any back flow towards the water source when priming. As for the one I made here, I still use it when I need to carry live bait and don't wish to drag a minnow bucket. Now that I have a motor on the kayak the minnow bucket is not as annoying to tow. I have always been really happy with this live well though and I like that I can use it bank fishing also.
where did you get the plumbing that is secured to the tank?
Hey thanks for watching! Hope you will consider subscribing if you have not already. All of the plumbing and fittings for the livewell came from Lowes. You could also find it on Amazon, and at pretty much any farm and home store in the section that has parts for sprayers, and by the plumbing.
I don't know where the 50$ comes from since the water tight dog food container alone cost more than 40$
container 40$
battery 25$
pump 20$
adapters and tubing 10$
dry box 10$
switch, connector and cabling 10$
This thing cost well over a 100$.
I had the vast majority of it, and the container was $15 👍
Common misconception is that these pump suck up water, they DON'T. Drain/Outlet needs to be bigger than the inlet. One way valve is really great in the inlet tube thru the scupper
The Hobie one will suck it up from the scupper, this particular pump design just isn’t made for that. I did have a one way valve in the inlet tube at one point but it was causing problems. Thanks for watching!
What is the same of the container?
Hi thanks for watching! If you are not already a subscriber I'd appreciate it if you were! The container is a pet food container, specifically found in the dog food section of places like farm and home stores. Walmart may have stuff like this as well. I am not sure what the brand is or anything. I built it a while back but I believe it is a 7 gallon tank. They are usually sold in pounds since it is for dog food, but google helped me convert that to approximate gallons.
What size container is this?
Hey thanks for watching! This is a 20LB container, they sell them based on pounds not gallons. It's roughly 5.5-6 gallons? I'm guessing but confident its over 5 gallons. I did not realize this wasn't addressed in the video so I'll add it to my subscription. Thanks for catching that. Don;t forget to subscribe!
@@PenguinOutdoors thanks !!
@@Z33Garage You're welcome, tight lines!