I doubt people realize just how big the jaws are on the crane and just how fast it goes from pile to shredded. When you compare it to the person standing beside the machine it will blow your mind.
In the yard debris recycling yard I worked in we used a WHO tub grinder with a turbocharged supercharged Detroit in it. That tub grinder would pulverize a 3ft in diameter tree stump in a matter of seconds into chips no bigger than a few inches, it was impressive.
@@FondelMikeRotch Its a horizontal grinder/chipper. If you need the exact specs of the machine, just google. And do it before being a jerk on the internet.
When adding a new quarter mile entrance ramp to the highway they used one of these monsters along with three excavators to keep feeding it, big, whole trees it devoured...ive never seen a bigger piles of chip..
@@heli-crewhgs5285 If you look at the end conveyor with the product coming off the end. Right before you see the product is a black conveyor belt running 90 degrees across. That is a permanent magnet belt that pulls metal off the end product before going into the pile.
It's the black conveyor running at 90 degrees to the discharge belt, it's energised above the debris, lifting out any nails/screws/fixings and then de-energises briefly to throw them in to the red skip on the right hand side of the unit.
Good Material for coverups on Landfills Or In Muddy areas. NOT good Material for Landscaping. But it does Make everything smaller inside. Its What we really need to be doing at Landfills. Crushing and shredding up the garbage just so can save more space in landfills but also breaks down faster. Plus while Shredding with some machines can even pull the metal out. So the Landfill could send that scrap metal to be recycled and maybe even get paid for it.
The red dumpster is there to collect the metal. There is a permanent magnet conveyor that runs over the material as it exits the chamber removing nails etc from your finished material.
These are probably sent to a boiler plant to burn for renewable electricity. Other things you can make garden mulch, use as fiber for composting, or glue together for manufactured lumber products. If the chips are of very high quality you can use them to make paper.
Nails are not a problem at all. It grinds with no damage to the machine. To avoid the nails contaminating the end product, they are picked up with the magnetized belt that runs above and perpendicular to the end conveyor. Some people run rail-road ties with the metal plates still in them.
Seems odd to use two machines when you could use one, although that Sennebogen is very overkill for wood waste so I suppose it isn’t much slower at loading that the shovel
Meh Doing dry small materials. Bring it to the forest for slash piles and we see the results. That being said, if you like being a fuel boy (800 hp eats fuel!) and enjoy hours and hours of expensive maintenance buy a grinder.
I was amazed at how quickly and the amount of debris that shedder is putting out!! That thing is awesome
It's not a shredder, it's a woodchipper, and that's why it's so fast. Right tool for the job.
@@mariaviklund4546 yeah seen a shredder that took 40 min to make a pile that took this machine 8 minutes
Love to watch these machines eat! Crane operator is a master at keeping her running full
I doubt people realize just how big the jaws are on the crane and just how fast it goes from pile to shredded. When you compare it to the person standing beside the machine it will blow your mind.
Close on 900hp it’s going to chew some shit.
In the yard debris recycling yard I worked in we used a WHO tub grinder with a turbocharged supercharged Detroit in it. That tub grinder would pulverize a 3ft in diameter tree stump in a matter of seconds into chips no bigger than a few inches, it was impressive.
Now that's a good machine best output I've seen , making some money running that one
Two sweet machines working hand in hand 💪💪
Cant get enough of this, keep up the good work💪🏻
When you use a chipper to process woodwaste, and not some shredder, this is what you get! Right tool for the job.
This is NOT a chipper.
This is a grinder. Two entirely different machines for different jobs.
Dont post if if have not a clue.
@@FondelMikeRotch Its a horizontal grinder/chipper. If you need the exact specs of the machine, just google. And do it before being a jerk on the internet.
Awesome how fast the grinder shreds that wood
Чудова механізація Super.👍🇪🇺🇺🇦
Looks like they clicked that thing all the way up to beast level.
A mad house but pumping out product.
This is amazing!!
Smooth running operation.
great video - excellent biomass for digester
Bonjour j'aime bien vidéo Merci 💓💞
What a fast machine!
Very pleasant to watch
That demolition can be colored and used as bark mulch. Lead paint and all.
Dont forget all the glue, and all the fuckin clear coat. I saw some cabinets / shelves in there :)
:) !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Esse moedor é top de mais
Wow.................that is good and fast.
When adding a new quarter mile entrance ramp to the highway they used one of these monsters along with three excavators to keep feeding it, big, whole trees it devoured...ive never seen a bigger piles of chip..
What is being shredded and what is the end-use of the product?
Oh~~~very good 👍👌👏
Amazing machine
Máy đỉnh cao quá
Works great what about all the paper an plastic
Bien dice la ley de la física. La materia no c crea, ni c destruye. Solo c transforma.
Perl entonces como puede existir energía si no puede ser creada? 🤔
What a fkn beast!
Be nice to see the magnetic separator too.
How do I identify the ‘magnetic separator’?
@@heli-crewhgs5285 If you look at the end conveyor with the product coming off the end. Right before you see the product is a black conveyor belt running 90 degrees across.
That is a permanent magnet belt that pulls metal off the end product before going into the pile.
Thing is though it’s also shredding mdf board which has formaldehydes, so not really a safe recycling
Is the end product mulch, for gardening?
I bet the mafia has one
I always wondered why they don't do this with all trash b4 it goes into the landfill?
What size screens are in the machine?
So what happens with the chips?
I wish a drone footage is coming.
Great video, now I learned how wood is recycled.
이게뭐라고..계속보게 되는거지!존잼ㅎ
Would like to see how the magnetic separator operates on this
It's the black conveyor running at 90 degrees to the discharge belt, it's energised above the debris, lifting out any nails/screws/fixings and then de-energises briefly to throw them in to the red skip on the right hand side of the unit.
What happens to the wood chips? Is it turned into compost or chipboard?
Probably burned at bioenergy production
Could be contaminated with lead paint…
What exactly is the shredder shredding?
Dead pallets or storm cleanup?
what is the person with the camera doing,can't they keep it still
Wow
Good Material for coverups on Landfills Or In Muddy areas. NOT good Material for Landscaping.
But it does Make everything smaller inside. Its What we really need to be doing at Landfills. Crushing and shredding up the garbage just so can save more space in landfills but also breaks down faster. Plus while Shredding with some machines can even pull the metal out. So the Landfill could send that scrap metal to be recycled and maybe even get paid for it.
You can make OSB with it too. Or feed it to a furnace for heat/steam/power generation.
a big machine
The amount of material this machine shreds is ridiclious, its almost not enough with the single crane to feed it.
👍👍👍👍👍😎
Tub grinder would be efficient with this stuff
Why is there a red dumpster next to the 6400CT?
The red dumpster is there to collect the metal. There is a permanent magnet conveyor that runs over the material as it exits the chamber removing nails etc from your finished material.
Они в курсе что щепки самовоспламеняются ?
That is what I get in my Scotch mulch, broken up skids in big chunks, el crap o
whats the horizontal belt near the discharge?
That is a magnet belt. A powerful permanent magnet that prevents the end product from being contaminated with nails and other 'tramp' metal.
Extremely-satisfying video! Crane operator, Perhaps fill shredder more slowly (?) a lot of "slopping over" the sides causes more need to clean up.
OSB producer
I could make so much from some of that wood.
Not anymore it’s chips
Il aurai pas copier sur bandit ?
And the magnetic belt removes the nails
木材をチップにして何を作るんでしょう？
These are probably sent to a boiler plant to burn for renewable electricity.
Other things you can make garden mulch, use as fiber for composting, or glue together for manufactured lumber products. If the chips are of very high quality you can use them to make paper.
3명이 다하네
Trying watch the video but u keep moving the camera and shaking
Mean enough to eat 2x4s and crap shavings!
What's the price this machine ?
Here in NH USA where CBI machines are made, this machine here, new, over $600,000 US.
Do you know how to hold a camera still ?
The Jimmie Hoffa….
Дерево перерабатывает как будто
Ногти грызёт.
não tem novos videos esses são repetidos
walk and make video at same time is nogo
A co z gwozdziami też się zmiela
Nails are not a problem at all. It grinds with no damage to the machine. To avoid the nails contaminating the end product, they are picked up with the magnetized belt that runs above and perpendicular to the end conveyor.
Some people run rail-road ties with the metal plates still in them.
I was just wondering why not just use the loader to throw the wood at the machine
Seems odd to use two machines when you could use one, although that Sennebogen is very overkill for wood waste so I suppose it isn’t much slower at loading that the shovel
inefficient. three times faster to load chipper this way
Оце шредер
Hungry MFR right there. Lol
Contac person .....if you want to buy that machine
Wonder how that machine would do with pallets? The nails would probably destroy it
M d f everywhere.
"
I'm dizzy
Paint , chemicals, arsenic, asbestos....not worth the fuel to grind it.
Camera work made me dizzy
Amatör kamrta.
All dust is dangerous and those guys don't seem to be wearing masks. Good visual evidence for future litigation.
No Hi-Viz or Hard Hats either in a dangerous shared pedestrian/vehicle traffic situation, very shoddy standards.
Without showing the shredding this video is definitely 👎👎👎
Did you even watch? You see the material
Dear @@sammyn9345
??? Can't you read or simply not understand what is written?
Best regards, luck, health and wisdom.
Crap grab opperator
No he’s not lol
@@sammyn9345 yes he is. He goes to put a load on and looses it virtually. Not a way to keep a machine at work.
@@cidertom5140
The grapple of trash is 10 feet or more, the grinder throat is under 7 feet. WTF you think is gonna happen?
@@oldtimerf7602 better control, less to drop ohhh!!! No need to be rude!!
It is not an issue… the grinder is on tracks, just move it and quick clean up with loader. That beast is eating as fast as he can load!
Meh
Doing dry small materials.
Bring it to the forest for slash piles and we see the results.
That being said, if you like being a fuel boy (800 hp eats fuel!)
and enjoy hours and hours of expensive maintenance
buy a grinder.