How to - Rear Hub Replacement Bearing on a Jeep Patriot 2WD Step-by-Step Guide for Beginners

Learn how to replace a rear hub bearing on a Jeep Patriot 2WD with this easy-to-follow, step-by-step guide. Perfect for beginners, this tutorial simplifies the process and ensures you can confidently tackle this repair. Jeep Patriot hub replacement is made straightforward with detailed instructions, so you can avoid costly mechanic fees and get back on the road quickly.
Faulty Hub bearing signals, noise, humming sound(noise) from the wheel
**What You’ll Learn**:
How to identify a faulty rear hub bearing on a Jeep Patriot
Tools you’ll need for the job
How to safely lift and support your vehicle
Step-by-step instructions to remove and install the new rear hub bearing
Tips for ensuring proper torque and alignment for optimal performance
🔧 **Some of Tools Needed**:
10mm, 17mm, 19mm sockets
Extensions
Wrench
Torque wrench
Rubber hammer
Penetrating fluid
Pry bar
Hub bearing
Jack stand
The most common signs of a faulty hub bearing include:
Grinding or Growling Noise:
One of the most noticeable symptoms is a grinding or growling sound coming from the wheels. This noise often increases with speed and is typically louder during turns or cornering.
Humming or Rumbling Noise:
A failing hub bearing may produce a continuous humming or rumbling sound while driving, which can vary with vehicle speed and may get worse over time.
Wheel Vibration:
You may feel vibrations through the steering wheel, especially as you drive faster. This vibration can be caused by uneven wear or play in the hub bearing.
Loose or Wobbly Wheels:
A worn-out hub bearing can cause excessive play in the wheel, making it feel loose or wobbly. This can lead to poor handling and reduced control of the vehicle.
Uneven Tire Wear:
A faulty hub bearing can cause uneven tire wear because the wheel may not be turning as smoothly as it should. This can also be due to the added strain on the suspension.
ABS Warning Light:
Some hub bearings are integrated with the ABS sensor. If the bearing fails, it can trigger the ABS warning light on the dashboard due to sensor malfunction or improper readings.
Pulling to One Side:
If the hub bearing is severely worn, it can affect the alignment of the wheel, causing the vehicle to pull to one side while driving.
Addressing these symptoms early can prevent further damage and keep your vehicle safe on the road.
⏱ **Time Required**: Approx. 2 hours for beginners.
*Why Replace a Rear Hub Bearing?*
The hub bearing is a critical part of your Jeep Patriot's suspension and steering system. A worn-out bearing can cause excessive noise, poor handling, and even dangerous driving conditions. With this DIY guide, you’ll be able to tackle the job confidently at home without needing to pay for expensive labor at the shop.
In this video, we'll cover:
1. Removing the old hub bearing
2. Installing the new hub bearing
3. Tips and tricks to make the process smoother
**Vehicle Compatibility**:
This tutorial is specifically for Jeep Patriot models but may apply to other Jeep vehicles with similar suspension setups.
**Time Estimate**:
This job should take around 1-2 hours depending on your experience level.
If you find this video helpful, please give it a thumbs up, leave a comment with any questions, and don't forget to subscribe for more DIY car repair tutorials!
#JeepPatriot #CarRepair #DIYAutoRepair #HubBearingReplacement

[@unwell_mechanic]

Awesome job, I would do it the same way. I can teach you how to replace a front bearing using my press.

[@espanglishGarage]

@@unwell_mechanic that would b nice! upload a video and tag me 👍

[@unwell_mechanic]

good Job buddy.