@@Ninja_Gaijin For the record we do this on the in-house builds. Got some flack from our original video showing that as most customers didn't have the tools needed and it caused a ton of questions!
@@BTPA_USA All installed now - really great products! Couldn't fit my Neutrik gaskets with the BTPA connectors though (but that's alright since they are clearly smaller than the Neutriks since are too small for the gaskets). Only suggestion I would make for the product is to perhaps consider making the inside edges less sharp, I think I might try filing the edges a little, so that they can't hurt any cables running near the bracket. Still haven't done cabling yet so not sure how going to run it but I generally don't like sharp edges on things xD
Hi Mike! Thanks for the inquiry. No, the 4 port panel fits on all NOVO series Pedaltrain boards without needing higher feet. We are working to upload a legend to our website explaining which models of boards need feet and what do not. Thanks!
Fantastic, I was looking for this exact product to add to my board. However, do you offer any type of rear mount option? Do you think I could use your BTPA side mount on the rear of my PT-PedaltrainPRO? I need the jacks in the back of the board, thanks!
We definitely do! That was the original product that sparked the idea for these side panels, actually! Our part number is PP-0011-10 - btpa.com/PP-0011-10.html
Hi Matt! Thanks for the comment. We offer these on our site. Here are links to all of our Pedaltrain panel options: Empty Options: 2 Port - btpa.com/PP-0012-02.html 3 Port - btpa.com/PP-0012-03.html 4 Port - btpa.com/PP-0012-04.html 10 Port - btpa.com/PP-0011-10.html Feedthrough Connectors w/ Panel 2 Port - btpa.com/pp-0012-02-thru.html 3 Port - btpa.com/pp-0012-03-thru.html 4 Port - btpa.com/pp-0012-04-thru.html Feedthrough Connectors & Power Ports w/ Panel 2 Port - btpa.com/pp-0012-02-THRUP.html 3 Port - btpa.com/pp-0012-03-THRUP.html 4 Port - btpa.com/pp-0012-04-THRUP.html We do not have any dealers in the UK, unfortunately. We are working to fix this, though. We ship internationally via USPS Priority Mail, which I will admit is kind of costly. Thanks!
Yes, so you can use locking jacks (per Jeroen's response). Also so that all of your inputs and outputs are in one location. It makes for an easier setup and tear down at gigs.
😱. Pilot Hole, or at least dot punch, always !
Always mark & drill small Pilot Holes, to Ensure Proper placement.
yes it should have been center punched to ensure accurate screwing/drilling
@@Ninja_Gaijin For the record we do this on the in-house builds. Got some flack from our original video showing that as most customers didn't have the tools needed and it caused a ton of questions!
Will this fit on the old Pedaltrain Jr ? (NOT the Classic Jr)
You will need our higher feet kit for this to fit on the old Pedaltrain Jr
Quick question, what are the 4 rubber pieces for? Thanks!
If you use solder type panel connectors, they cover the solder points on the back and the cable goes through it (you cut a hole)
@@BTPA_USA perfect- my question, too.
Will the 4 panel port fit underneath a pt classic jr without raising the feet?
Hi Caleb. Unfortunately, a 4 port panel will require higher feet on the PT-CLJ.
Should I use a PH2 or a PH3 screw bit in my drill? Don't have any screw bits so have to go buy one
a 2 will work!
@@BTPA_USA All installed now - really great products! Couldn't fit my Neutrik gaskets with the BTPA connectors though (but that's alright since they are clearly smaller than the Neutriks since are too small for the gaskets). Only suggestion I would make for the product is to perhaps consider making the inside edges less sharp, I think I might try filing the edges a little, so that they can't hurt any cables running near the bracket. Still haven't done cabling yet so not sure how going to run it but I generally don't like sharp edges on things xD
does the 4 panel port require a lift to the board to fit with a side installation on a novo 24?
Hi Mike!
Thanks for the inquiry. No, the 4 port panel fits on all NOVO series Pedaltrain boards without needing higher feet. We are working to upload a legend to our website explaining which models of boards need feet and what do not.
Thanks!
Fantastic, I was looking for this exact product to add to my board. However, do you offer any type of rear mount option? Do you think I could use your BTPA side mount on the rear of my PT-PedaltrainPRO? I need the jacks in the back of the board, thanks!
We definitely do! That was the original product that sparked the idea for these side panels, actually! Our part number is PP-0011-10 - btpa.com/PP-0011-10.html
The installation video for that panel can be found here - th-cam.com/video/ZPxD33nkynQ/w-d-xo.html
Look at their website
Do you know where I can get this in the UK, can't find those panels on the web? thanks
Hi Matt!
Thanks for the comment. We offer these on our site. Here are links to all of our Pedaltrain panel options:
Empty Options:
2 Port - btpa.com/PP-0012-02.html
3 Port - btpa.com/PP-0012-03.html
4 Port - btpa.com/PP-0012-04.html
10 Port - btpa.com/PP-0011-10.html
Feedthrough Connectors w/ Panel
2 Port - btpa.com/pp-0012-02-thru.html
3 Port - btpa.com/pp-0012-03-thru.html
4 Port - btpa.com/pp-0012-04-thru.html
Feedthrough Connectors & Power Ports w/ Panel
2 Port - btpa.com/pp-0012-02-THRUP.html
3 Port - btpa.com/pp-0012-03-THRUP.html
4 Port - btpa.com/pp-0012-04-THRUP.html
We do not have any dealers in the UK, unfortunately. We are working to fix this, though. We ship internationally via USPS Priority Mail, which I will admit is kind of costly.
Thanks!
@@BTPA_USA Did you guys figure anything out for the UK yet?
@@paulenglandphoto5539 We still do not have any dealers over there, unfortunately :(
Why do you need a side port?
So you can use input jacks with lock, at least in my case
Yes, so you can use locking jacks (per Jeroen's response). Also so that all of your inputs and outputs are in one location. It makes for an easier setup and tear down at gigs.