FANUC 0i mate TD/TF set reference point after replace the Drive battery
ฝัง
- เผยแพร่เมื่อ 22 ส.ค. 2024
- If your FANUC system display:
DS0300(X)APC Alarm:need ref return
DS0300(Z)APC Alarm:need ref return
DS0306(X)APC Alarm:Batterie voltage 0
DS0306(Z)APC Alarm:Batterie voltage 0
You should change drivers batteries, and reset the reference point.
Before you set a reference point, you need to move the machine to the original reference points nearby.
Fine thanks for sharing
fanuc is designed in bad way not simple procedures.
can i do this with Y axis only too? we had DS0306(Y)APC Alarm:Batterie voltage 0 and than DS0300(Y)APC Alarm:need ref return. the other axis had no error
how to lock and unlock parameters in control fanuc oi tf
th-cam.com/video/cYn5wu6ZLsg/w-d-xo.html