Give your Kick & Bass more Separation for a Tight Low End
ฝัง
- เผยแพร่เมื่อ 27 พ.ค. 2024
- ➡️ FREE WORKSHOP "How to Build the PERFECT MIX TEMPLATE"
mixdown.online/free
➡️ Get FULL CONTROL over CUBASE with
THE ULTIMATE GUIDE TO CUBASE
mixdown.online/cubase
➡️ Craft Professional, Radio-Ready Mixes
Using Only the Tools Available to You in CUBASE
with The Ultimate CUBASE MIXING Masterclass mixdown.online/mix
Give your Kick & Bass more Separation for a Tight Low End
No more muddy low-end mixes here…
In today’s video, I’m going to show you how to get a tight, clear low end in your mix using only Cubase stock plugins!
These are some of my favorite techniques for getting the kick and bass to play nicely with each other.
What’s your favorite technique for doing this? Let me know in the comments below!
Instagram: / mixdownonline
Facebook: / mixdownonline
TIK TOK / mixdownonline
Website: mixdown.online
Timestamps
0:55 Why use sidechain compression
1:30 Adding a compressor to the bass track
2:15 Setting up the sidechain
3:05 Listening to kick and bass togther
3:40 Emphasizing the kick without the ducking effect
4:15 Listening to the full mix so far
4:40 Using a low shelf to balance low end
5:45 Setting up the sidechain in the EQ
6:05 Kick and bass together
6:50 Fine tuning the sidechain
7:25 Using a stereo drum loop to sidechain
8:00 Setting up the sidechain
8:15 Lowpassing the signal
9:10 Making a copy of the track
10:00 Setting the sidechain on the drum loop copy
11:05 Using the Dynamic EQ on the drum loop
11:37 Closing thoughts
Compare CUBASE Versions: new.steinberg.net/cubase/comp...
Some of the gear and plugins I use in the studio:
CUBASE 12 sweetwater.sjv.io/XxQVe5
STEINBERG LICENCE KEY sweetwater.sjv.io/6bBJNN
DAW CONTROLLER Presonus Faderport 16: sweetwater.sjv.io/5bXnGn
STREAM DECK amzn.to/3OFVHaO
MONOGRAM CC monogramcc.com/shop/
SPEAKER CONTROLLER sweetwater.sjv.io/gbvG75
MICROPHONE sweetwater.sjv.io/b3WVKB
STUDIO MONITORS:
KALI Audio IN-8 sweetwater.sjv.io/XxQVBM
HEADPHONES:
Audeze MM-500 www.audeze.com/products/mm-500
Austrian Audio Hi-X65 sweetwater.sjv.io/vno7MN
Beyer Dynamics DT770 sweetwater.sjv.io/LPzQ6O
STUDIO MONITOR CONTROLLER sweetwater.sjv.io/gbvG75
VIDEO FILMING GEAR
Video gear shared in this video
CAMERA geni.us/My8h
CAMERA PRIME LENS geni.us/Pu7i
CAMERA MIC geni.us/zBCdmg
LAVALIER MIC geni.us/DdQTq
CAMERA LIGHT geni.us/2fruo
VIDEO LED LIGHTS geni.us/259YYN
LIGHT STANDS geni.us/ARrDmz3
SOFT BOXED geni.us/L2XAmoq
RGB FLOOR LIGHTS geni.us/KwL7 - เพลง
Nice! Another great rock n roll trick is to HP the bass around 80Hz, boost at 100 and push the kick at 58-64. Compression to taste and you're good to go! Quick and easy. Really works a treat on up-tempo ditties, too. :)
Great tip! Thanks!
Will try this, thanks.
Cool trick Chris on the EQ SC part.. Finna try that ASAP.. tnx
Great Chris, as usual ! 👍
I regularly use another variant.
I send my bass in parallel into an auxiliary track with a low pass filter around 100 Hz, 6db/oct slope.
And I reverse the polarity of this auxiliary track. The low pass filter then becomes a low cut / low shelf.
Finally, I place a gate just behind the filter, sidechained with the kick. So the bass is filtered into the bass frequencies only when the kick hits.
Greetings from France. 🇨🇵 😉
What are the advantages of that technique?
@@mystycblade Hi,
This technique simply gives me more flexibility.
I can control the amount of reduction I apply to the bass with a simple fader, under my finger.
And if another instrument (cello, bass synth, or others...) interferes with the kick, I don't need to duplicate an instance of multi-band compression: I can send this instrument to my aux, and move on.
Great tips as per Chris, coupled with huge congratulations on reaching 100k. Truly well deserved mon ami. You are a real asset in our Cubase community. A pleasure to us all that keeps learning from you and the team. Merci 🙏🏿🖤🙏🏿
Thanks a million! :-)
Woooooowwww ❤❤❤ thank u sir ❤❤❤
Thx once again Chris👍
Of course!
Great tip Chris!
Thank you! Glad it was helpful!
As usual, a very useful video, especially for a slow learner like me... thank you.
Dear Chris. Thank you for your interesting and helpful Videos. Can you Show your SuperVision settings at The Stereo Out (Mixing) and during Mastering process?
Thank you Chris. Each one of your videos is teaching me always something more! I'm using your mix template and I must admit that now my music sounds much better than before. Thanks!
Great to hear! You're welcome!
Thank you!! Excellent
You are welcome!
Hi Chris....🤓
Lovely walkthru all about ducking & covering dynamic EQ as well...
Mind if I ask you what the Bass VST / Preset is ? It sounds gorgeous.....
Much Love.. 🤓👍👍🥇
Excellent video! Thanks, Chris!
Added to my favourites. Very clear, to the point, easy to follow tutorial. Thanks.
Glad it was helpful!
I'll give it a try
Thanks Chris
good tutorial, i love to use Trackspacer for kick/bass SC :)
Glad you like it! :-)
👍🔥🔥Thank you, creator
You're welcome!
I stil love my Drawmer DS201 & the DBX120a to get a massive low end 😊
Excellent! Thanks Chris.
Of course!
Love it, Chris - thank you!
My pleasure!
thank you sir 🙏
Most welcome
Hey Chris you explained this very well, thanks!
Thank you! Glad I could help!
Thank you sir your videos always useful. Have a good day.😊
Always welcome
Perfect timing again Chris as I’m finishing processing the drum stems so will use this on the bass and also add a link to this video to my procedural list for all appropriate future mixes! Thank you! 🙏
You're welcome!
Great video! I use Frequency for side-chaining, especially for ducking electric bass or ducking midrange (chord) instruments that should create space for the melody. Most of the time, Frequency sounds more pleasant to my ears than using regular compression, spectral compression, Baby Audios smooth operator, or even soothe. Also, if you are using frequency you don't even need a duplicated drum track for scenarios similar to your last example: Frequency should by default only listen to the relevant frequency range of your input signal - and at 100 Hz the kick should be pretty much dominant. If that is not enough, you can still turn off the auto side-chain filter mode, choose your own trigger frequency, and go for 60 Hz or something. ;)
You're right about Frequency, I wanted to keep this video to work with any plugins, but I will make a dedicated video on Frequency soon :). Thanks for watching!
Very cool! Can you do a similar video using live rock instruments?
For drums/bass, it's basically the same thing! But I can do a video on another Sidechain technique, you can do using live rock instruments :-)
Love using this trick! Thanks Chris! Is there a way in Cubase if you have edited an event and maybe did some slip editing or moved the event from it's original position, a way to get it back to it's original position with a key command?
I often use the last technique in this tutorial to separate guitar and bas. I engage a side chained frequncy 2 on guitar track low frequencies triggered by the bas.
That's a good way to use Sidechain compression
or you use a gate with side chain kick and fix the floor to -6db. The cubase's gate can select the trigger's frequency. it's easiest.
Cool technique :-)
Turning Auto off in the Side Chain section of Frequency and dialing in the actual frequency to respond to seems like a better and cleaner way to do this rather than creating an entirely new track and filtering it down. Not saying this is a bad option - there's always more than one way to do things and perhaps sometimes this might be best for people without Frequency, but if you're using it for the second demonsrtation then you may as well use it again, the side chain capabilities in Frequency are powerful enough to do it all on its own.. It also gives you the ability to do things like pump the high frequencies in response to a low frequency trigger which can make some really wild pumping tracks this way. Thanks for the vid.
Yes, you're correct. Frequency has that ability. And yes, the way I showed will work for everyone that doesn't work with Frequency. Thanks for your input!
Hi Chris thank's for the video. My question is in case of SC compressor for base line (triggered by KD) do you use another (2nd) compressor (with no SC) to manage dynamics of the base line with this final (2nd) compressor or do you use the one (SC comp) for whole dynamics of base line. Hope you understand what is my point. Thank's in advance.Jan
The sidechain only compresses the bass when the kick triggers so for overal compression on the bass I allways use a 2nd compressor 😊
Thank's me too. I just wanna be sure.@@Studio22mix
All this did for me was remove all the low end from my electric bass. I note you had it on a synth bass. It actually sounded much better before I put it on.
Great example of ducking, not just to bring out the kick, but as a great effect
Awesome sauce!
Oh yeah!
Make Anotha one!
Will do!
Awesome looking forward to them!@@mixdownonline
One more trick: to use sidechain frequency knob in Frequency2 EQ (instead of auto). No need to create copy - just focus on frequency that you want
if someone has Frequency, that can work pretty well. Thanks for sharing!
We need an ai plugin called the bass separators 😂. Maybe it will go very far
Lol! Why not! Lol!
YOU DONT EVEN CNOW WHAT IT MEANS
I've been producing and mixing professionally for more than 20 years, I clearly don't know what it means ;-). Quick tip, check your spelling when you write a comment :-)