I SAID I WOULD NEVER DO IT AGAIN!
ฝัง
- เผยแพร่เมื่อ 17 ต.ค. 2022
- In todays video for some reason we are doing it again! Buy off Ebay?
Good buy or a bad deal? Let me know what you think.
Hope you enjoy!
My cousins Instagram - / hma.treecare
BUY "MAKE HAY WHILE THE SUN SHINES" NOW!!
PLACKITT & BOOTH BOOKSELLERS - Signed: bit.ly/3oV8Amc
WHSMITH - Signed: bit.ly/3ILYlZr
AMAZON: amzn.to/3s0NyEV
Get your "Tom Pemberton Farm Life" merch -
www.tompem-farmlife.co.uk
Follow me on
Instagram - / tompemberton_farmlife
Facebook - Pembertondai...
Twitter - / tpfarmlife
Snapchat - pemb6
Website - www.pembertonsfarmshop.co.uk
Enquiries - tom@pembertonsfarmshop.co.uk
If you would like to find the Farm shop or send something that way the address is:
Birks Farm
Ballam road
Lytham
Lancashire
FY8 4NL
KIT I USE -
(If you use these links it helps me out and cost you nothing more, Thanks :D)
Drones i have used... If you starting off, Go for the cheaper ones... You will crash at the start!
Mavic Pro 3 (With fly more kit) - amzn.to/3cPRbId - Current
Mavic Pro 2 - amzn.to/2PR5c9t
GoPro's i have in my bag.
GoPro Hero 6 - amzn.to/2DnKTdq
GoPro Hero 8 - amzn.to/36Cs3MD
GoPro Hero 10 - amzn.to/3Q5OCQH - Current
Rodes Mic Pro - amzn.to/2EqxO3P -Current (If you can, Get the wind muffler with it)
Camera - amzn.to/2I2e3EG
Tri -Pods.
Gorilla Try-pod - amzn.to/2SmtTi7
New Try-pod I'm playing with - amzn.to/2OS9wsB - Current
Cold Shoe Mount to exten the Mic - amzn.to/3vuNPkd - Current
Still Shots Try-pod - amzn.to/2Dt8Q2W
The Bag I Never Take Off - amzn.to/2BuziJA
Bib And Brace I Wear - amzn.to/2rN6OZG
Time Lapse Camera im trying for the build - amzn.to/3tCVbys
Cheaper Time Lapse Camera im trying also - amzn.to/3uJ9RO3
MY AMAZON STORE -www.amazon.co.uk/shop/tompemb...
Oh and Tom. You are better off drilling some holes in the rimms, so that the water will pass through them. Thus wont stay in them and ruin the bearings😁
I've build one myself. And found this out by getting rusty bearings and stuck tires overtime🙃
Tom great job, love the videos. One thing to consider with tyre pushers is change the tyre if the wall of the tyre is wearing. I have heard of issues where small pieces of the wire from the tyre got into the silage, then eaten by the cows and stuck in there gut it didn't end well. They lost a number of cows as a result, it was after a few cases and vet investigation that they found the picecs of wire, the tyre pusher was the suspected source.
A big square bale at an angle does the job and cleans the floor perfectly
It's a round bale unroller that someone added the tires to. You can see where it used to be 3 point hitch mount too.
This was a implement for unrolling and rolling up plastic sheeting on carrots Neeps etc. The reason for the hydraulic expanders is for taking the looms on and off
MAD, I saw one of these the other day and thought of you straight away!! Brilliant
Those things on the end you said they were wire rollers but I think that they are a thing that you can lift round bales and roll them out for cow then you have a strip of hay or straw.
I recon the the random thing on the front is meant to have another one on the other side and it picks up the big roles of silage plastic so you can in role it easier.
Wow....look at those blue skies!
I think that peg on the implement is for rolling out big round bales for cattle. I do believe you would have to remove the tires to do that though. And that strange noise you heard when you went to start the manitou it sounds like a fuel pump that is going bad. awesome videos Tom! I love what your doing with the farm and thank you and the ginger for everything you guys do!
also unrolling reels of chainlink or other heavy sheeting like garden swath plastics or planting nets for garlic
@@prjndigo Possibly!
It was designed to unroll round bales. They're used a lot in the USA to feed hay in the field in winter
@@jamesgriffiths7579 Yea I own one but manufactured ones normally have more of a spike instead of a peg for stabbing the flat end of the bale.
Good to no about the manitou and the fuel pump. I’ll have to have a look 😊
Hey, Tom.
I would recommend you to put the "Saltlickers" not on the concrete, because it is so agrassiv and takes the moisture out of it, so the concrete won't last that long and the super flush finish could be ruined 🙈
Maybe there is a possibility to build a fixture at the walls besides the water trough.
We had that problem here in Germany on a Farm...
Greetings from Germany, keep on doing your videos, we love them.
Hi, my thought that it was for unrolling plastic sheets over your silage clamps. We have a similar contraption but then one that doesn’t move hydraulic. But can pick it up with a bucket so we don’t have to get of our tractor.
Thanks to the lovely lady butcher in the shop (sorry, name forgotten) who spent some time with me a few Sundays ago when I popped in. It was great to see the place after watching the vids for a while! She's a credit to the team. Go eBay - yeah boi!
Hello Tom and the ginger warrior it’s Tim from London .. really nice to see you the other day after watching all your videos over the years it’s was a pleasure to meet both the farm is amazing and to anyone who reads this I would truly recommend visiting the farm everyone was so welcoming definitely going back see you all soon Tim and family 🚜
Great meeting you the other day 😊
Hope you had a good trip 🙌
I think the machine was either a old school bale un roller, or for rolling out plastic of fleece coverings over veg drills e.g. Potatoes etc.
That weird pin is ment to have a twin on the other side. You use it to unroll a round bail. Pinch in with the two spikes in the core of the bail and drive forward.
On the pusher, i believe i've seem those made with a turning bracket straight onto the tyre. So no rime or air in tyres needed.
Hi Tom, I watch some farm channels here in the States and they have what looks like square rubber pans for the salt block that set on the ground. That would save you concrete. Love your channel, I always get a big smile watching you and your Dad.
🥰Thanks for the referral to your cousin Ben! I put you on pause, followed him on Facebook and Instagram, then finished watching your video. You're going to have to get that wheel repaired if you ever want it to hold air again 🥰
that is an old/Modified hay roll unroller..we use one to unrool our hay n the winter so their isnt nearly as much waste !
I think the pin in the middle is for the siloplastick roll so you can spred it in the middle and you don't have to do it whit hands.
How about filling the tires with foam since they will never be used to drive on? Also, adding draining holes to the rims would be a great plan.
I was thinking it's homemade too. Probably was something to roll out stadium turf, road fabric, or big bales. Goes in and out to pick up the roll. Someone welded on the wheels to change it's purpose. You should drill some holes in the wheels so they don't hold water. I bet the bearings are full of water that ran through the top seal.
I agree with Brandon rolling out round bales you actually got a steal because you can do alot with this unroll page wire fence, you also if it closes enough could use it as a bale squeeze for dry squares / rounds and wrapped balage just make a couple adapters and you could have an awesome multitool. I'm kinda jealous great videos keep them up.
We could use a good tree care specialist here in Southern California. Our Big Paloverde tree has damage, sits close between the garage n fence, from the winds and afraid we will loose it. It has been trimmed but lost more big limbs after the trim.
So glad to see you happy!!!!!!
Hi Tom. That feed pusher was originally a large bale unroller. Have a great one. 🇨🇦
I love how excited you are about a pusher
Farmers are to be thanked every day ! I especially love dairy farmers because I love all dairy products. The milk in Canada is especially tasty! Thank you Tom !🇨🇦🥰
Fabulous find. Congratulations.
Lovely... cheap and perfect solution! And from eBay... sweet job Tom
Looks like you can take the tires and brackets off and use it as a bale un roller. We use them in the states a lot
if you add a V wedge like an asphalt squeegee in the front to center it up to the tires might get it done in one pass
Basic concept is great, Now redesign so that there is a hydraulic motor on each wheel to spin it slowly to fling or move the feed outwards, so that you'd not require forward motion for it to work and it would also work in reverse.
Needs a small V-wedge in front of tires so that it pushes the feed, in the middle, outwards toward the tires. Looks like a good purchase for the farm Tom!
yeah it even got holes for that upgrade already so just need to build v-shape to fit at front that is the same height as bottom of tires
This is actually a good design
That floor on the trailer isn't steel, it's GRP mesh.. It makes good anti slip walkways as well!
Great video love ur passion to keep ur girls happy & make ur life a little easier
Well done on getting a successful eBay purchase 😊😊
Hi Tom, it's 12.11am here in Australia. I spotted your latest as I was getting ready to go sleep. That must wait till later. Blessed be.♥️♥️♥️
Thank you so much 😊
Awesome video! I see your new scraper leaves a little bit in the middle just a suggestion what if you welded a V in the middle out of steel and bolt on two pieces of floor rubber mats cut to fit cuz I see your doing two passes anyway maybe that would be enough to get the feed to where the tires catch it and get it pushed up to the cows and maybe cut down on waste? Just a thought!
I love that this works for you, I would have done a little bit of work on it first, new bearings and fresh hydraulic oil and grease the arms just to make sure it lasts longer for you
Great video Tom the pusher looks home made and they have done a great job I seen them made with tractor tyre but that was for one side only but when the tyre’s are blown up it might work bit better keeping it level but great buy and keep up with the great videos 👏👍👍👍
The spiks on the pusher upper is for roling a round bale out or carry one around
Nice bit of kit Tom.
I would splash out and get to new tyres on it and a good grease up/clean up job a good one 👍🏻
Definitely a good investment. Juat needs a triangle bit in the middle. 💪
Looks like a round bale unroller someone made into a feed pusher
So pleased for you Tom, it looks like a terrific addition and even matches the colour of your Manitou.😮
Haha what at the chancesn 😂
I'd say the bit on the front might be for putting a silage sheet on with a bar through it to make it easier to sheet up just drive to the top of the clamp and it would just unravel whilst you reverse backwards.
Tom could you put some kind of wait on top of scraper maybe that will work. That was nice of your cousin to pick it up and drop it off and pick it back up. It works but not to fancy with it
That used to be for a hay roller your hay bale sits on the spikes you set it down and roll out the hay in a line if you're cattle are out in the field we used one a lot on the farm I used to work at here in the USA
We made one out of a JF disk mower same as yours and a old scraper frame welded on and bolted tiers to the outer disks and removed the middle one, worked well
For years
Two hydraulic motors and a couple of brushes, like a street sweeper, would be a great mod, if the wheels ever fail.
Happy Tuesday every body. Be well be you glad you found a good solution for the pushing
Hey Tom, love the videos. I am actively involved in the rough and tumble of dairy farming for 170 cows. These videos are great. Hello from W. NY state!
Thanks for watching 😊
I'd be tempted to just fill those tires with expanding spray foam (insulation)
Who knew such a thing existed, great purchase Tom!
That’s a brilliant piece of kit 👍👍
Tom you should invest in a metal silage plough we have one on the pallet forks of our loader for the last 25 years works a dream
Hi Tom that tyre scraper was originally a bale unroller chance the hydraulics it would be used with spikes on the the round parts into a round bale and at winter you can unroll bales onto snow for animals to eat.
Yup, I was gonna say that.
Yep. + 1 on the built out of an old bale unroller. 👍
Me too. My thoughts
Hi Tom I would say that the tyre pusher used to be for unrolling nets for on top of turnips etc. looks good 👍🏻
Great result Tom.
The “ fencing wire holder “ is where that machine used to spike a round bale it would’ve had one on the other side and used to unroll bales until someone’s welded two wheels on the bottom
Good on you, Tom!
That's just the sort of equipment I'd like to do a restoration job on!
Clean off the rust, free up seized parts, grease everything up and a paint job on the frame.
Go immediately to Pemberton Farm and have at it. You would be appreciated by folk in many countries, Scotland too.
@@annahkurtin5345 I agree 😂
Almost 500,000 subscribers,keep up the great work🐄🐮🚜👍
Thanks Dermot 😊
Good looking cousin. and nice of him to help out. Now he needs to start videos :) Tree work can be super cool.
You shameless hussy Melissa 😎😎😎😎
@@themayorofdipshittery3646 Not really. I am married, and I can appreciate a nice looking person. Not going to chase after him. geesh...
Everyone can appreciate a good looking man 😂
Great purchase Tom, well worth buying a proper tool for the job! 👍🏻
quick thought if both wheels are tiltet just a slight bit to the outside they will always spin the right way
That extra bit on the right side looks like a place to hang a barb wire spool, or electric fence wire.
Great video Tom hopefully the pusher will work well for u
Great video Tom what a great buy the silage pusher and a bargain as well
That’s a polythene reel that’s been converted, use them for covering young veg plants etc
Bonus points for indoor drone flying while pushing grass 🤟
That’s an old bale unroller that someone has converted. It would have had a spike on both sides and you open it up, spike in the middle of bale and unroll it out in a field. I bought one just last week.
You could put the Electric fence spool on the bar at the front would make it easier wher putting out a new fence
Great buy Tom, smashed it 😄👌🏻
Awesome kit.
Might have been a vegetable net rolling up machine before hand.
Such an awesome pusher upper! You succeeded with eBay. 😇💜
That silage pusher is good 👍
Hi Tom if it gets tedious swapping implements all the time on the manitou, we used to have the tyer pusher like yours, but on a frame that you could slide the bucket into and go push up with that. No hydraulic like this one, but didn’t need it to be honest. 👍
👍👍Glad the feed pusher upper works. 😁
Good video Tom that looks better Tom 👍👍
£250 well spent Tom, that will save you loads of time and it does a great job.
A very good Wednesday morning to you all from Wellington Somerset
And the same to you 😊
Thanks for sharing your vid’s
It's a round bale unroller that someone converted to a feed pusher
I bet the ginger was so excited bidding on eBay!! Love the videos Tom please keep it up…. From a guy in Canada!
Love an eBay purchase 😍
Looks like a modified three point bale unroller to me which would explain the spike on one side there should be another on the opposite side.
It just goes to show how happy the girls are no amount of new equipment phases them great machine for an E Bay buy haha...
Excellent buy.
That thing is for rolling out round bales the spinner is missing off the other side. There’s bunches of them over here in the states.
Tom the silage pusher looks like the pegs could be for moving and rolling out silage sheet It looks like it could well have been made by Tom Horn Fabrication at Nateby br Garstang not that far from John Cornthwaites Farm Machinery
Work smarter not harder .... cracking job well done
Something to think about for the new pusher is a 3rd wheel in the middle to push the middle to either side...
Anther smashing video Tom and the pusher up it a class peice if equipment for your cows it was a good good buy for you tom thank from bryon
GOOD MORNING TOM! From Roger in Pierre South Dakota USA 😊
Tom that’s been an old bale unraveled been made into a tyre pusher that’s why it would go on back of the tractor and had the spikes on the end
Great buy at last my brother 💙👌🏻
Visiting the farm shop tomorrow on the way down to Wales. Cant wait!
🙌😊
@@TomPembertonFarmLife Got my carton of milk and on the way too Wales now!
Tbh so far so good looks to be a top purchase for you! Fair play 👍
Will save you a heap of time👍👍