Making an oak and steel dining table
ฝัง
- เผยแพร่เมื่อ 11 มี.ค. 2020
- For this project I used 8cm thick oak planks. I started by marking the cuts on each plank not paying much attention to cracks and knots as I planned to fill them up with epoxy later on. After cutting on a band saw, each oak plank was planed to a flat surface on 3 sides and to a right angle in between each side. Planks are then planed down to thickness of 66mm and fingerjointed. For glueup, I used d3 acetate glue with open time of approx. 20 minutes at room temperature so we had to work fast. The glue was left to set over night. After removing clamps, board was left to rest for a few days before trimming and planing on a kuka kr150 cnc robotic arm. on the under side of the table top, I milled a groove where table base will be positioned later on. For filling up the cracks and knots, I used clear epoxy resin with black pigment mixed in. After the resin was set, excess was sanded off and a layer of clear resin was applied to whole surface to fill the pores. Excess was once again sanded off and 3 coats of clear matte water based varnish was applied. First two coats with a brush and the final one with a spray gun. In between the second and a third coat, the surface was fine sanded by hand with 400 grit sandpaper.
Legs for this table are made from 40x120x4 mm square tubing. All the pieces are cut to measure and then welded together into a zigzag shape as seen in the video. Small plastic adjustable legs are added to protect the floor surface from scratching. all welds were sanded down using an angle grinder and holes are drilled for the screws that will attach the base to the table board. Base is then painted in two coats of color. First is the base coat and the second one is two component polyurethane finish. After drying, table base and table top are joined together.
Thank you for watching and don't forget to like and subscribe! :D
My instagram: lignum_chan...
My facebook: / lignumchannel
Website: www.lignum-art.com/
Music: Boardwalk, Higher kiss, Recess by Tracktribe - แนวปฏิบัติและการใช้ชีวิต
This was perfect as a vanity desk for me. th-cam.com/users/postUgkxMAlHv7-BBWMrPRm5-uEoD6rtdT7SG2Qr Especially the glossy finish. Easy to cleanI was looking for something that wasn't the traditional white and with more of a modern feel. This fit the bill beautifully. I put it together with no problems, by myself in under an hour.Make sure you double check where you place the drawer tracks before screwing down. I had one track that needed to be aligned with different holes than the rest.
This is a valuable addition to my woodwork collection th-cam.com/users/postUgkxbnOKZBE4evMO5V2vroHeCjq6d_MV6wJO I still will rate this woodwork plan as the best in my reference library. It always seem to stand out from the rest whenever you go through the library. This is a masterpiece.
Wow. You always surprise me. I love how original your ideas are. Very inspirational!
That’s a beautiful piece of furniture. Great job! Thanks for sharing this with us.
This has to be one of my favorite project from you. Beautiful, Wee done !!
Craaaaazy tableleg design! Thanks for sharing this 10/10🥰
A very beautifully made table combining traditional material with contemporary style. Very well done. Kind regards.
I always enjoy your style of videos. Too much chit chat nowadays. Fantastic work. Well done. I especially like the inset for the base in the bottom of the table top. Great idea.
First time I’ve seen epoxy used as a base coat. What a great idea! I’m guessing you get a super smooth durable finish that does not look or feel like plastic.
perfect timing! beautiful as always
This table is gorgeous! 💖
When I see a notification for another Lignum video my mood changes instantly for the better. Just one click away from more amazing magic. This is the perfect complement to the Spiral Table build. They should be kept together as a set. You nailed it again.
:D Thank you so much Michael! I'm glad you enjoy my videos and my designs!
I love the rustic top with the modern base. Great project.
Thank you Allen!:D
How can you dislike that !! This is art !! I like it realy !! Nice job guys !!
I have no words! Simply beautiful! I love this table! love you, bro!
:D Thank you Pedro!
The crossing point where the legs come together is perfect.
Great proyect, and awesome workshop!!
I have said it before and I'm going to say it again today. You have never failed to impress. Impresive & Awesome work. 👍👍👍
Thank you very much Ali! :D
Modern and beautiful!!
Un vídeo muy interesante y sobretodo didáctico, carpintería, construcciónes metálicas,con soldadura MIG pintura, barnizado,el resultado final es excelente,un saludo y por supuesto un gran like desde Narón, Galicia ( España)
What a great job, it's just fun to watch your video.
You work clean and tidy, well done my friend 🔥🔥🔥
Another incredible build. Makes me want to build one on a smaller scale. Thanks for sharing.
Thank you very much! :D
this format of the table support was fantastic. beautiful designer. congratulations.
Thank you Gerson!
You guys are next level!
Beautiful design - Great and beautiful craftsmanship
love your work and especialy the ideas, Thanks for sharing. from Algeria
Thank you! Greetings from Croatia!
Nice!
Loving the attention this piece gets. Also like the way you shape & glue the wood pieces together.
Thank you Peter!
Fascinating video to watch...learn something from you every time, my friend. I love watching your use of the tools that you have...some day when I think of a project that is beyond the scope and scale of what I'm capable of...I'm going to send it your way!
Thank you very much Stan! Send and I'l see what I can do.. :D
luv the table 👍
Great job Sir! Keep posting.
Brutalni ste, svaka čast, oduvijek sam volio gledati kako pravi majstori rade stvari i predmete od drveta i metala i to mi je jedna od najvećih želja u životu, raditi takve stvari! Nažalost život me natjerao da radim ono što ne volim... Još jednom svaka čast!!!
Hvala Mario! Meni u fazi skolovanja Isto nije bilo na kraj pameti da cu se baviti ovim pa eto.. Zivot odvede u cudnim pravcima..
BEAUTIFUL JOB, BEAUTIFUL TABLE‼️👍👍. Vinny 🇺🇸
Thank you very much Vinny!
Отличная работа!
Классный столик!😍👍
Nice piece of work, well done..
Как всегда на высшем уровне. 👍
That cnc is so sweet🔥i pray to have something like that one day🙏
So gorgeous!! Wish I could buy!
lindo trabalho,parabens. aqui no brasil nao tem uma oficina tao aparamentada.puro luxo.
A real Masterpiece - Great
Thank you Barny! I'm glad you like it!
Beautiful table
This is great!
Спасибо за идею! Надо сделать такой же!
Excellent job
muy bonito, excelente trabajo!!!
Good job! Like!
Awesomenessssssss!!!!!!
Sweet base!
Thank you Burton!
👏👏👏👏Très très bien 👍👍👍👍
wonderful job
I love ur work!!!
Thank you Oliv Ma!
Beautiful !
Thank you Steve!
wow ,another Masterpiece
greetings,,,,,
from - @Kerala India
Beautiful
Good job.👍👍👍 verry nice .
Very nice as always! Like the legs interesting design!
Thank you Jan! :D
Beautiful.
Thank you Scott!
I love this project, the end result is simply incredible. What I love more than anything about your channel and work though, is that for all the crazy talent and amazing design elements that you go through and need really fantastic tools for, you still use the angle finder from Lidl, along with other tools. I love how you have such professional machinery mixed in with what some would consider "junk" or "trash". Keep up the amazing videos!
Very awesome!
Thank you Quinten! :D
piece of art
Отлично получилось!
Perfect and Elegant
Красивый стол),!
You did a great work.
Thank you Israel!
The man took out his chain saw and trimmed the table top. That’s when I knew I was where I needed to be on you tube.
Johnny Fletcher yeah and then he took his robot to square the edge... :D
Love it
Using chainsaw to trim down the table edge then ask the bot to finish everything. I like your way, the most simple and the highest tech, nothing in between :). Thank you for sharing. Take care and Stay safe during this crisis time. :)
Thank you Nguyen, I'm glad you like it. Simplest ways are usualy the best.. I hope this crisis will end soon, stay safe also my friend..
Amazing! Thank you!
Thank you Johnnie! :D
Very cool leg design!
Thank you!
Wow dbest work
Q mesa linda. PARABÉNS!!
Super nice 😊👍
beautiful
Lindíssima 👏👏👏👏👍🤗
This design is so cool, great Work
Oh... you are here
Oh... you are here
Oh... you are here
AWESOME.....
Nice !
Svaka čast!
Hvala!
C'est un beau travail
Получилось супер! У вас хорошая мастерская
Love that you chose to go with black resin to fill the cracks. Great contrast with the light color of the oak, and ties in well with the legs. Of course... you already know that since you designed it that way, lol. I also really dig the modern, almost 80's style vibe the shape of the legs give off. That ultra-contemporary look mixed with the natural warmth of the wood.
I do have to admit.... I kinda miss the classical music. 😋
Thank you Bruxxus, I'm glad you like the design! I must admit, I miss it too but It's getting really difficult to find some good classical recordings without copyright lately.. And unfortunately, TH-cam refreshes their library with new classical pieces really rarely.. I'l have to start using classical pieces I already used..
@@lignumchannel That's such a bummer! Even though the music is public domain, I suppose that doesn't count for the actual performances. :(
Even without the classical music, your videos are still some of the very best out there! :D
I want that table now.
Parabéns trabalho belíssimo
That one humble shop with a couple robots down on the corner...
XD
skynet pawa!
00
😆😆😆 I thought so too.
Yeah... I see what you're saying. But in most shops there would always be that one guy to be always glad to give you a crash course on any of the machines and their workings. I know this because I am one of those guys. And this is world wide! It's like a brotherhood for us. We welcome people that have any inclination towards technical stuff. You just have to ask and if you truly like the trade, show interest. Easy! I still don't understand it all but I went along with it. And it paid! Big bucks ands big xp+. But at the end of the day, it's all hard work and you'll feel that on your joints and also on your bank balance. You just have to have the balls to be a man at the end of the day. Either good or bad. Some are good some are not. I have almost 20 years in the trades and so far I can honestly say that its worth it. At least for me. Your experience may differ. You do you.
Good job bos
Vrhunski video!!!! I još bolji stol :)
Very Good And Beautiful. 🇻🇳🇻🇳🇻🇳🇻🇳🇻🇳
excellent
Odličan video, kao i uvjek
Hvala:D
ฝีมือดีมากครับ สุดยอดๆ
good job
Thanks!
Классное оборудование
Show. 👏👏👏👏👏👏👏
nice video
Сначала подписался потом смотрю))
NYC work
Красиво Интересно, а ногам удобно
Jako dobro zgleda...
Hvala! :D
Really nice Design of the legs
I'm glad you like them!:D